Instruction/ maintenance manual of the product MG1532 Hobart
Go to page of 8
701 S. RIDGE AVENUE TROY, OHIO 45374-0001 937 332-3000 www.hobartcorp.com FORM 34389 Rev. B (Aug. 2001) MG1532 & MG2032 MIXER-GRINDERS MODEL MG1532 ML-134099 7.5 HP Grind Motor + 1 HP Mix Motor MG1532 ML-134103 5 HP Grind Motor + 1 HP Mix Motor MG1532 ML-134100 7.
– 2 – © HOBART CORPORATION, 1997 MODEL MG1532 MIXER-GRINDER MODEL MG2032 MIXER-GRINDER.
– 3 – Installation, Operation, and Care of MG1532 & MG2032 MIXER-GRINDERS SA VE THESE INSTRUCTIONS GENERAL The MG1532 & MG2032 Mixer-Grinders are designed to use a #32 (42 / 46) size knife and plate (knives and plates are available at extra cost but not included with grinder).
– 4 – INST ALLA TION Immediately after unpacking the mixer-grinder, check for possible shipping damage. If the machine is found to be damaged, save the packaging material and contact the carrier within 15 days of delivery.
– 5 – ELECTRICAL CONNECTION WARNING : ELECTRICAL AND GROUNDING CONNECTIONS MUST COMPLY WITH APPLICABLE PORTIONS OF THE NATIONAL ELECTRICAL CODE AND/OR OTHER LOCAL ELECTRICAL CODES. WARNING : DISCONNECT THE ELECTRICAL POWER SUPPLY AND PLACE A TAG AT THE DISCONNECT SWITCH INDICATING THAT YOU ARE WORKING ON THE CIRCUIT.
– 6 – CONTROL BOX HEATERS The Mixer-Grinder has a heater in the control box and another heater in the front control panel to keep the controls dry.
– 7 – PL-40984-1 WORM SEAL MIX ARM SEAL MIX ARM WORM GRINDER ATTACHMENT The Wedge cylinder is marked TOP and BOTTOM. Before operating, make sure TOP is visible. The grinder attachment can easily be removed for cleaning (see Cleaning, page 8). Use the spanner wrench to loosen the adjusting ring and remove the adjusting ring, plate and knife.
– 8 – CLEANING WARNING : DISCONNECT THE ELECTRICAL POWER SUPPLY BEFORE CLEANING OR SERVICING THIS MACHINE. In any cleaning operation after disconnecting the electrical power supply, seal the receptacle to prevent entrance of moisture.
An important point after buying a device Hobart MG1532 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hobart MG1532 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hobart MG1532 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hobart MG1532 you will learn all the available features of the product, as well as information on its operation. The information that you get Hobart MG1532 will certainly help you make a decision on the purchase.
If you already are a holder of Hobart MG1532, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hobart MG1532.
However, one of the most important roles played by the user manual is to help in solving problems with Hobart MG1532. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hobart MG1532 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
