Instruction/ maintenance manual of the product HBP7 ML-126379 Hobart
Go to page of 12
HBP SERIES FOOD HOLDING AND TRANSPOR T CABINETS MODELS HBP4 ML-126378 HBP7 ML-126379 HBP13 ML-126381 HBP15 ML-126382 HBP40 ML-126383 HBP7I ML-126384 HBP13I ML-126385 HBP15I ML-126386 HBP77 ML-126380 HBP77I ML-126387 HBP8HI ML-126388 HBP12HI ML-126389 HBP15HI ML-126390 FORM 34136 Rev.
– 2 – T ABLE OF CONTENTS GENERAL ............................................................................................................................................. 3 INSTALLATION .........................................................
– 3 – Installation, Operation and Care of MODEL HBP SERIES FOOD HOLDING AND TRANSPORT CABINETS PLEASE KEEP THIS MANUAL FOR FUTURE USE GENERAL Hobart Holding and Transport Cabinets are produced with quality workmanship and material. Proper installation, usage, and maintenance of your cabinet will result in many years of satisfactory performance.
– 4 – INST ALLA TION Before installing, verify that the electrical service agrees with the specifications on the rating plate located on the lower left corner. If the supply and equipment requirements do not agree, do not proceed with the installation.
– 5 – INSTALLATION CODES AND STANDARDS The cabinet must be installed in accordance with: In the United States of America: 1. State and local codes. 2. National Electrical Code, ANSI/NFPA-70 (latest edition). Copies may be obtained from The National Fire Protection Association, Batterymarch Park, Quincy, MA 02269.
– 6 – Electrical Table Model Voltage Amp Phase Hz NEMA Plug HBP4 110/120 10 16 0 5-15 208/240 5.4 6-15 HBP7 110/120 10 16 0 5-15 208/240 5.4 6-15 HBP13 110/120 10 16 0 5-15 208/240 5.4 6-15 HBP15 110/120 10 16 0 5-15 208/240 5.4 6-15 HBP40 110/120 16.
– 7 – WIRING DIAGRAMS HBP4, HBP7, HBP13, HBP15, HBP40, HBP7I, HBP13I, HBP15I.
– 8 – HBP77, HBP77I.
– 9 – HBP8HI, HBP12HI, HBP15HI.
– 10 – OPERA TION WARNING: THE CABINET AND ITS PARTS ARE HOT. BE VERY CAREFUL WHEN OPERATING, CLEANING OR SERVICING THE CABINET. CONTROLS Fig.1 All Models (Fig. 1) POWER INDICATOR LIGHT – Lit when power is supplied to cabinet. HEAT INDICATOR LIGHT – Lit when heat is supplied to cabinet.
– 11 – OPERATING CABINET 1. Connect electric power supply. • Power indicator light is lit. 2. If cabinet is a HBP8HI, HBP12HI, or HBP15HI, press ON/OFF switch ON. • Interior air circulating fans start. • Control/component compartment cooling fans start.
– 12 – FORM 34136 Rev. A (11-98) PRINTED IN U.S.A. Shutdown If cabinet is a HBP8HI, HBP12HI, or HBP15HI, press ON/OFF switch OFF. Extended Shutdown Unplug electrical power supply. Power indicator light will go off. CLEANING WARNING: UNPLUG ELECTRICAL POWER SUPPLY BEFORE CLEANING.
An important point after buying a device Hobart HBP7 ML-126379 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hobart HBP7 ML-126379 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hobart HBP7 ML-126379 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hobart HBP7 ML-126379 you will learn all the available features of the product, as well as information on its operation. The information that you get Hobart HBP7 ML-126379 will certainly help you make a decision on the purchase.
If you already are a holder of Hobart HBP7 ML-126379, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hobart HBP7 ML-126379.
However, one of the most important roles played by the user manual is to help in solving problems with Hobart HBP7 ML-126379. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hobart HBP7 ML-126379 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
