Instruction/ maintenance manual of the product 3HFD140 Hobart
Go to page of 12
ELECTRIC FR YERS MODEL 3HFD140 ML-126831 4HFD140 ML-126832 FORM 34613 (Mar. 2001) 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 937 332-3000 www.hobartcorp.
– 2 – MODEL 3HFD140 ELECTRIC FRYER HOBART CORPORA TION, 2001.
– 3 – Installation, Operation, and Care of Model 3HFD140 & 4HFD140 Electric Fryers SA VE THESE INSTRUCTIONS GENERAL The model 3HFD140 electric fryer has a unitized cabinet with one 85 lb. fry tank on the left, one 140 lb. fry tank on the right, and a 25" Frymate station positioned between the two fry tanks.
– 4 – ELECTRICAL CONNECTIONS WARNING : ELECTRICAL AND GROUNDING CONNECTIONS MUST COMPLY WITH THE APPLICABLE PORTIONS OF THE NATIONAL ELECTRICAL CODE AND/OR OTHER LOCAL ELECTRICAL CODES. WARNING : DISCONNECT ELECTRICAL POWER SUPPLIES AND PLACE A TAG AT THE DISCONNECT SWITCHES TO INDICATE THAT YOU ARE WORKING ON THE CIRCUITS.
– 5 – Fig. 1 POWER Switch — Controls electric supply to fryer. POWER ON Light — Indicates electric supply is on. TEMPERATURE CONTROL — Regulates power to the heaters, controls temperature. HEATING Light — Indicates heating elements are on.
– 6 – ADDING SHORTENING Before placing shortening in tank, allow solid shortening to come to room temperature where the fryer is located for one to two hours to soften the shortening.
– 7 – USING THE FILTER SYSTEM Filter system parts must be in their proper positions while the system is in use . . . • Crumb Basket hangs on left Tank Handle (Fig. 4) to catch crumbs during draining. • Filter must be flat on tank bottom and Filter Orifice must be placed over the tank hole (Fig.
– 8 – WARNING : HOT OIL AND PARTS CAN CAUSE BURNS. USE CARE WHEN FILTERING. DO NOT LEAVE UNATTENDED. • Warm fryer compound to a temperature of 260 ° F before filtering. Turn fryer power switch off. • If desired, add 8 oz. of diatamaceous earth to the filter tank or add it to the fry tank with stirring.
– 9 – Flushing and Discarding Used Oil WARNING : HOT OIL AND PARTS CAN CAUSE BURNS. USE CARE WHEN FILTERING. DO NOT LEAVE UNATTENDED. • Warm fryer compound to a temperature of 260 ° F before filtering. Turn fryer power switch off. • Open Drain Valve (Fig.
– 10 – CLEANING — DAILY Clean your fryer regularly. If regular cleaning is neglected, grease will be burned on and discolorations may form. These may be removed by washing with detergent or soap and water.
– 11 – Stainless Steel Stainless steel may be cleaned with a solution of detergent and warm water. To prevent water spots and streaks, rinse equipment thoroughly with warm water and wipe dry with a clean cloth. The addition of a rinsing agent will also help prevent spotting.
– 12 – MAINTENANCE WARNING : HOT OIL AND PARTS CAN CAUSE BURNS. USE CARE WHEN OPERATING, CLEANING, AND SERVICING THE FRYER. WARNING : DISCONNECT ELECTRICAL POWER SUPPLIES BEFORE PERFORMING ANY MAINTENANCE. WARNING : SPILLING HOT OIL CAN CAUSE SEVERE BURNS.
An important point after buying a device Hobart 3HFD140 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hobart 3HFD140 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hobart 3HFD140 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hobart 3HFD140 you will learn all the available features of the product, as well as information on its operation. The information that you get Hobart 3HFD140 will certainly help you make a decision on the purchase.
If you already are a holder of Hobart 3HFD140, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hobart 3HFD140.
However, one of the most important roles played by the user manual is to help in solving problems with Hobart 3HFD140. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hobart 3HFD140 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
