Instruction/ maintenance manual of the product RAC-10KH2 Hitachi
Go to page of 26
– 1 – ENGLISH SPLIT TYPE AIR CONDITIONER INDOOR UNIT/OUTDOOR UNIT MODEL RAS-08KH2/RA C-08KH2 RAS-10KH2/RA C-10KH2 RAS-14KH2/RA C-14KH2 OUTDOOR UNIT INDOOR UNIT RAC-14KH2 RAS-08KH2 RAS-10KH2 RAS-14KH2 Instruction manual To obtain the best performance and ensure years of trouble free use, please read this instruction manual completely.
– 2 – ! SAFETY PRECAUTION ● Please read the “ Safety Precaution ” carefully before operating the unit to ensure correct usage of the unit. ● Pay special attention to signs of “ Warning ” and “ Caution ” . The “ Warning ” section contains matters which, if not observed strictly, may cause death or serious injury.
– 3 – ENGLISH PRECA UTIONS DURING OPERA TION ● Do not attempt to operate the unit with wet hands, this could cause fatal accident. ● When operating the unit with burning equipments, regularly ventilate the room to avoid oxygen insufficiency.
– 4 – INDOOR UNIT NAMES AND FUNCTIONS OF EACH P AR T Air filter To prevent dust from coming into the indoor unit. (Refer page 21) Front panel Indoor unit indicators Light indicator showing the operating condition.
– 5 – ENGLISH INDOOR UNIT INDICA TORS TEMPORARY SWITCH Use this switch to start and stop when the remote controller does not work. [Use non-conductor stick (example toothpick)] ● By pressing the temporary switch, the operation is done in previously set operation mode.
– 6 – AUTO HEAT DEHUMIDIFY COOL FAN FAN SPEED LOW MED HI SLEEPING STOP (CANCEL) START (RESERVE) START/STOP TIME TIMER SET TIMER SELECTOR ON TIMER OFF TIMER AUTO SWING ˚ CH RESET ˚ CH NAMES AND FUNCTIONS OF REMOTE CONTROL UNIT REMOTE CONTROLLER ● This controls the operation of the indoor unit.
– 7 – ENGLISH AUTOMA TIC OPERA TION The device will automatically determine the mode of operation, HEAT, COOL or DEHUMIDIFY depending on the initial room temperature. The selected mode of operation will not change when the room temperature varies.
– 8 – HEA TING OPERA TION ● Use the device for heating when the outdoor temperature is under 21 ° C. When it is too warm (over 24 ° C), the heating function may not work in order to protect the device. ● In order to keep reliability of the device, please use this device above – 10 ° C of the outdoor temperature.
– 9 – ENGLISH RESET ˚ C ˚ C DEHUMIDIFYING OPERA TION Use the device for dehumidifying when the room temperature is over 16 ° C. When it is under 15 ° C, the dehumidifying function will not work.
– 10 – ˚ C RESET ˚ C COOLING OPERA TION Use the device for cooling when the outdoor temperature is 22-42 ° C. If indoor humidity is very high (over 80%), some dew may form on the air outlet grille of the indoor unit. Press the FUNCTION selector so that the display indicates (COOL).
– 11 – ENGLISH FAN SPEED (AUTO) ..... When the AUTO fan speed mode is set in the cooling/heating operation: For the heating operation ● The fan speed will automatically change according to the temperature of discharged air. ● When the difference of room temperature and setting temperature is large, fan starts to run at HI speed.
– 12 – HOW TO SET THE TIMER ON/OFF-Timer ● The device will turn on (off) and off (on) at the designated times. ● The switching occurs first at the preset time that comes earlier. ● The arrow mark appearing on the display indicates the sequence of switching operations.
– 13 – ENGLISH 3 Point the signal window of the remote controller toward the indoor unit, and press the (RESERVE) button. The (OFF) mark starts lighting instead of flashing and the sign (RESERVED) lights. A beep occurs and the (TIMER) lamp lights on the indoor unit.
– 14 – HOW TO SET THE SLEEP TIMER 1 Set the ON-timer. Set the current time at first if it is not set bef ore (see the pages f or setting the current time).
– 15 – ENGLISH Cooling “ ” and dehumidifying “ ” Explanation of the sleep timer The de vice will control the F AN SPEED and room temperature automatically so as to be quiet and good f or people ’ s health. Y ou can set the sleep timer to tur n off after 1, 2, 3 or 7 hours .
– 16 – ADJUSTING THE AIR DEFLECTOR 1 2 Adjustment of the conditioned air to the left and right. Hold the vertical air deflector as shown in the figure and adjust the conditioned air to the left and right. ● If the “ (AUTO SWING)” button is pressed once, the horizontal air deflector swings up and down.
– 17 – ENGLISH HOW TO EXCHANGE THE BA TTERIES IN THE REMOTE CONTROLLER 1 Remove the cover as shown in the figure and take out the old batteries. = 2 Install the new batteries. The direction of the batteries should match the marks in the case. 1. Do not use new and old batteries, or different kinds of batteries together.
– 18 – Suitable Room T emperature Install curtain or blinds V entilation Effective Usa ge Of Timer Do Not For get T o Clean The Air Filter Please Adjust Suitable T emperature For Bab y And Children Warning Freezing temperature is bad for health and a waste of electric power.
– 19 – ENGLISH FOR USER’S INFORMA TION The Air Conditioner And The Heat Source In The Room Not Operating For A Long Time When Lightning Occurs Caution If the amount of heat in the room is above the cooling capability of the air conditioner (for example: more people entering the room, using heating equipments and etc.
– 20 – A TT ACHING THE AIR CLEANSING AND DEODORIZING FIL TERS Cleaning and maintenance must be carried out only by qualified service personal. Before cleaning, stop operation and switch off the power supply. CAUTION ! NOTE ● In case of removing the air cleansing and deodorizing filters, please follow the above procedures.
– 21 – ENGLISH MAINTENANCE Cleaning and maintenance must be carried out only by qualified service personal. Before cleaning, stop operation and switch off the power supply.
– 22 – 3. MAINTENANCE AT BEGINNING OF LONG OFF PERIOD ● Run the unit by setting the operation mode to (FAN) and the fan speed to HI for about half a day on a fine day, and dry the whole of the unit. ● Switch off the power plug. Air Blow 2. Washable Front Panel ● Remove the front panel and wash with clean water.
– 23 – ENGLISH Cleaning and maintenance must be carried out only by qualified service personal. Before cleaning, stop operation and switch off the power supply. ! CAUTION Confirm CAUTION ● Please use earth line. Do not place the earth line near water or gas pipes, lightning-conductor, or the earth line of telephone.
– 24 – AFTER SALE SERVICE AND W ARRANTY WHEN ASKING FOR SERVICE, CHECK THE FOLLOWING POINTS. When it does not operate ● Is the fuse all right? ● Is the voltage extremely high or low? ● Is th.
– 25 – ENGLISH MEMO ..................................................................................................................................................................................... .............................................
– 26 – MEMO ..................................................................................................................................................................................... .....................................................
An important point after buying a device Hitachi RAC-10KH2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hitachi RAC-10KH2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hitachi RAC-10KH2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hitachi RAC-10KH2 you will learn all the available features of the product, as well as information on its operation. The information that you get Hitachi RAC-10KH2 will certainly help you make a decision on the purchase.
If you already are a holder of Hitachi RAC-10KH2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hitachi RAC-10KH2.
However, one of the most important roles played by the user manual is to help in solving problems with Hitachi RAC-10KH2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hitachi RAC-10KH2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
