Instruction/ maintenance manual of the product 2373.921 American Standard
Go to page of 4
*W rench Cer tified to comply with ANSI A112.18.1M Required T ools *Supplied with Fitting *Hex key Adjustable W rench Channel Locks Flat Blade Screwdriver DECK-MOUNT BA TH FILLER ENFIELD MOUNTING SURF ACE ADJ. 6-1/2 TO 12 8" 3-3/4" 5-3/16" 1-1/2 MAX.
SPOUT BASE RECESS T urn off hot and cold water supplies before beginning. CAUTION 1 2 Assemble RUBBER WASHER (5) and LOCKNUT (6) onto SPOUT SHANK (1). Align SPOUT ASSEMBLY and from underside of ledge secure SPOUT ASSEMBLY into position with LOCKNUT (6).
4 INSTALL HANDLES Push ADAPTER (1) on VALVE STEM (2), so that the hole of the ADAPTER (1) without a spline is facing up. See figure "A". Tighten STEM SCREW (3) to secure ADAPTER (1). Find correct position of LEVER HANDLE ASSEMBLY (4) or CROSS HANDLE ASSEMBLY (5) by adjusting male teeth on ADAPTER (1) to female teeth in HANDLE (4, 5).
9 Before the bathroom is completely finished, you may want to remove spout, hand shower, and handles. To remove handles, reverse steps in section 4. To remove SPOUT (1), proceed as follows: Lift TRANSFER ROD (8) and unscrew KNOB (2). Remove PLUG BUTTON (3) and remove SET SCREW (4) using 5mm hex wrench supplied.
An important point after buying a device American Standard 2373.921 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought American Standard 2373.921 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data American Standard 2373.921 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, American Standard 2373.921 you will learn all the available features of the product, as well as information on its operation. The information that you get American Standard 2373.921 will certainly help you make a decision on the purchase.
If you already are a holder of American Standard 2373.921, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime American Standard 2373.921.
However, one of the most important roles played by the user manual is to help in solving problems with American Standard 2373.921. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device American Standard 2373.921 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
