Instruction/ maintenance manual of the product H90SB OM H 90SB Hitachi
Go to page of 12
Demolition Hammer Model H 90SB Instruction manual Note: Before using this HITACHI Demolition Hammer, carefully read through this INSTRUCTION MANUAL to ensure efficient, safe operation. It is recommended that this INSTRUCTION MANUAL be kept readily available as an important reference when using this power tool.
1 We sincerely thank you for selecting a HITACHI POWER TOOL. To operate this power tool safely and efficiently, please read this INSTRUCTION MANUAL carefully to get a good understanding of the precautions in operation, capacity of the power tool, use and the like.
2 13. DISCONNECT POWER TOOLS. When not in use, before servicing, and when changing accessories, such as blades, bits, cutters. 14. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from the power tool before turning it on.
3 28. STOP OPERATION IMMEDIATELY IF ANY ABNORMALITY IS DETECTED. Should the power tool be detected as out of order or should other abnormalities be observed during operation, stop using the power tool immediately. 29. NEVER LEAVE THE POWER TOOL RUNNING UNATTENDED.
4 DOUBLE INSULATION SYSTEM ENHANCES SAFE OPERATION To enhance safe operation of this power tool, HITACHI has adopted a double insulation system. The term “double insulation” used here denotes an i.
5 NAME OF PARTS Fig. 1 NOTE: Install the side handle with the supplied 4 bolts and 4 spring lock washers. Tighten the bolts securely with the supplied wrench. SPECIFICATIONS Motor Single-Phase, Series Commutator Motor Power Source Single-Phase, 115V AC, 60 Hz Current 12.
6 OPTIONAL ACCESSORIES…sold separately 1. Bull point Overall length: 20-15/32”(520 mm) Code No.: 985230 2. Cold chisel Overall length: 20-15/32” (520 mm) Code No.: 985231 3. Scoop Overall length: 21-1/2” (546 mm) Code No.: 985233 4. Cutter Overall length: 20-15/32” (520 mm) Width: 2-15/16” (75 mm) Code No.
7 NOTE: Use a manual hammer to open/close the retainer as it is too heavy to move by hand. NOTE: When removing the accessory, such as a bull point, a cutter etc., follow the above procedure in reverse order. OPERATION 1. Pull the trigger switch after applying the tip of the bit to the crushing position.
8 2. Inspecting the mounting screws: Regularly inspect all mounting screws and ensure that they are properly tightened. Should any of the screws be loose, retighten them immediately. Failure to do so could result in serious hazard. 3. Inspecting the retainer (Fig.
9.
10 Item Part Name No. 58 Crank Washer 59 Hexagon Socket Hd. Bolt M10 × 16 63 Connector 64 Connector 65 Internal Wire 66 Hexagon Socket Hd. Bolt M10 × 60 67 Hexagon Socket Hd.
Issued by Shinagawa Intercity Tower A, 15-1, Konan 2-chome, Minato-ku, Tokyo 108-6020, Japan Distributed by 3950 Steve Reynolds Blvd. Norcross, GA 30093 itachi Koki Canada Co.
An important point after buying a device Hitachi H90SB OM H 90SB (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hitachi H90SB OM H 90SB yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hitachi H90SB OM H 90SB - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hitachi H90SB OM H 90SB you will learn all the available features of the product, as well as information on its operation. The information that you get Hitachi H90SB OM H 90SB will certainly help you make a decision on the purchase.
If you already are a holder of Hitachi H90SB OM H 90SB, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hitachi H90SB OM H 90SB.
However, one of the most important roles played by the user manual is to help in solving problems with Hitachi H90SB OM H 90SB. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hitachi H90SB OM H 90SB along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
