Instruction/ maintenance manual of the product CP-X1230CP Hitachi
Go to page of 16
1 Projector CP-X1230 CP-X1230 User's Manual - Operating Guide User's Manual - Operating Guide TECHNICAL Dimensions Dimensions [unit: mm].
2 • Be sure to check jack type, signal level, timing and resolution before connecting this projector to a computer. • Some computers may hove multiple display screen modes. Use of some of these modes will not be possible with this projector. • Depending on the input signal, full-size display may not be possible in some cases.
3 Initial Set Signals Initial Set Signals The following signals are used for the initial settings. The signal timing of some computer models may be different. In such case, adjust the items V POSITION and H POSITION in the PICTURE-2 menu. DATA H. Sync.
4 • Video signal: RGB separate, Analog, 0.7 Vp-p, 75 Ω terminator (positive) • H./V. sync. Signal: TTL level (positive/negative) • Composite sync.
5 Connection T Connection T o The Ports (continued) o The Ports (continued) Mini Din 4 pin jack 12 3 4 I VIDEO IN • RCA jack • System: NTSC, PAL, SECAM, PAL-M, PAL-N, NTSC4.
6 Connection T Connection T o The Ports (continued) o The Ports (continued) AUD IO IN 1 AUD IO IN2 RGB RGB OUT REMOTE CONTROL AUD IO OUT C R /P R C B /P B CONTROL R - AUDIO IN - L VIDEO IN S-VIDEO IN .
7 RS-232C Communication RS-232C Communication Connecting The Cable Turn off the projector and the computer power supplies. Connect the CONTROL port of the projector with a RS-232C port of the computer by a RS-232C cable. Use the cable that fulfills the specification shown in the previous page.
8 RS-232C Communication (continued) RS-232C Communication (continued) Requesting projector status (Get command) (1) Send the request code Header + Command data (‘02H’+‘00H’+ type (2 bytes)+‘00H’+‘00H’) from the computer to the projector.
9 RS-232C Communication (continued) RS-232C Communication (continued) Command Data Chart Names Operation type Header Command data CRC Action Type Setting code Keystone V Get BE EF 03 06 00 B9 D3 02 00.
10 RS-232C Communication (continued) RS-232C Communication (continued) Command Data Chart (continued) (This table is Names Operation type Header Command data CRC Action Type Setting code Language Set .
11 RS-232C Communication (continued) RS-232C Communication (continued) Command Data Chart (continued) Names Operation type Header Command data CRC Action Type Setting code Custom User B Set 50 BE EF 0.
12 Command Data Chart (continued) Names Operation type Header Command data CRC Action Type Setting code V Position Get BE EF 03 06 00 0D 83 02 00 00 21 00 00 Increment BE EF 03 06 00 6B 83 04 00 00 21.
13 RS-232C Communication (continued) RS-232C Communication (continued) Command Data Chart (continued) Names Operation type Header Command data CRC Action Type Setting code Video NR Set LOW BE EF 03 06.
14 RS-232C Communication (continued) RS-232C Communication (continued) Command Data Chart (continued) (This table is continued to the following page.) Names Operation type Header Command data CRC Acti.
15 RS-232C Communication (continued) RS-232C Communication (continued) Command Data Chart (continued) Names Operation type Header Command data CRC Action Type Setting code PinP Size Set Off BE EF 03 0.
16 RS-232C Communication (continued) RS-232C Communication (continued) Names Operation type Header Command data CRC Action Type Setting code Power Up Source Set Last Ch BE EF 03 06 00 9E D9 01 00 18 2.
An important point after buying a device Hitachi CP-X1230CP (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hitachi CP-X1230CP yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hitachi CP-X1230CP - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hitachi CP-X1230CP you will learn all the available features of the product, as well as information on its operation. The information that you get Hitachi CP-X1230CP will certainly help you make a decision on the purchase.
If you already are a holder of Hitachi CP-X1230CP, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hitachi CP-X1230CP.
However, one of the most important roles played by the user manual is to help in solving problems with Hitachi CP-X1230CP. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hitachi CP-X1230CP along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
