Instruction/ maintenance manual of the product CP-S245WF Hitachi
Go to page of 56
1 Projector CP-S245/CP-X255 User's Manual – Operating Guide Thank you for purchasing this projector . WARNING ►Before using this product, please read the "User's Manual - Safety Guide" and related manuals to ensure the proper use of this product.
2 About this manual . . . . . . . . . . 1 Content . . . . . . . . . . . . . . . . . . 2 Projector features . . . . . . . . . . 3 Prepar ations . . . . . . . . . . . . . . 3 About contents of package . . . . . . . 3 Fastening the lens cover . . . . . .
3 F astening the lens co ver T o avoid losing the lens cover , please fasten it the lens cap to the projector using the strap. 1. Fix the strap to the strap ring of the lens cover . 2. Put the strap into the groove on the rivet. 3. Push the rivet into the strap hole.
4 Par t names Part names Lens ( 17 ) Filter cover ( 45 ) (Air filter and intake vent are inside.) Elevator button ( 9 ) Elevator foot ( 9 ) Remote sensor ( 16 ) Zoom ring ( 19 ) Focus ring ( 19 ) V ent ( 7 ) Projector Lamp cover ( 44 ) (Lamp unit is inside.
5 Y R L AUDIO IN 2 AUDIO OUT CONTROL RGB IN 1 RGB IN 2 USB RGB OU T AUDIO IN1 LAN LINK AC T VIDE O S-VIDEO C B / P B C R / P R K AC inlet ( 14 ) Power switch ( 17 ) Elevator button ( 9 ) C.
6 SEARCH button ( 19 ) RGB button ( 18 ) VIDEO button ( 19 ) ASPECT button ( 19 ) HOME button ( 23 ) MAGNIFY ON button ( 21 ) OFF button ( 21 ) END button ( 23 ) FREEZE.
7 Setting up Setting up WARNING ►Place the projector in a stable position horizontally . A fall or a turnover could cause an injury and/or damage to the projector .
8 Ar r angement Refer to the illustrations and tables below to determine the screen size and projector distance. The values shown in the table are calculated for a full size screen: CP-S245 : 800×600.
9 Adjusting the projector's eleva tor CA UTION ►If you press the elevator button without holding the projector , the projector might crash down, overturn, smash your fingers and possibly result in malfunction.
10 Setting up Using the Security Bar WARNING ►Do not use the security bar to prevent the projector from falling. Dropping or knocking over the projector may cause damage or injury . A commercial anti-theft chain or wire can be attached to the security bar on the projector .
1 1 Setting up Connecting your de vices CA UTION ►Turn of f all devices prior to connecting them to the projector . Attempting to connect a live device to the projector may generate extremely loud noises o r other abnorm alities that may result in malfunction a nd/or damage to the device and/or projector.
12 Setting up Examples of connection with a computer * In the default setting, the AUDIO IN1 port is the audio port for the RGB IN1 and RGB IN2 ports. T o change the settings, refer to the AUDIO item in the SETUP menu.
13 Setting up Y R L AUDIO IN 2 AUDIO OUT CONTROL RGB IN 1 RGB IN 2 USB RGB OU T AUDIO IN 1 VIDE O S-VIDEO C B / P B C R / P R K Y R L AUDIO IN2 AUDIO OUT CONTROL RGB IN 1 RGB IN2 USB RGB OU T AUDIO IN.
14 Setting up Connecting pow er suppl y WARNING ►Please use extra caution when connecting the power cord, as incorrect or faulty connections may result in fire and/or electrical shock. • Only use the power cord that came with the projector . If it is damaged, contact your dealer to newly get correct one.
15 Putting batteries 1. Remove the battery cover . Slide back and remove the battery cover in the direction of the arrow . 2. I nsert the batteries. Align and insert the two AA batteries according to their plus and minus terminals as indicated in the remote control.
16 Using the remote contr ol CA UTION ►Be careful in handling the remote control. • Do not drop or expose the remote control to physical impact. • Do not get the remote control wet or place it on wet objects.
17 Po wer on/of f Power on/off WARNING ► When the power is on, a strong light is emitted. Do not look into the lens of projector . Also do not peep at the inside of projector through a hole. NO TE • T ur n t he p owe r on /of f i n r igh t or der .
18 Operating Operating Adjusting the v olume 1. Press the VOLUME button on the remote control. A dialog will appear on the screen to aid you in adjusting the volume. 2. Use the cursor buttons ▲/▼ to adjust the volume. T o close the dialog and complete the operation, press the VOLUME button again.
19 Operating Adjusting the zoom and f ocus 1. Use the zoom ring to adjust the screen size. 2. Use the focus ring to focus the picture. Selecting an aspect ratio 1. Press the ASPECT button on the remote control. Each time you press the button, the projector switches the mode for aspect ratio in turn.
20 Operating Using the automatic adjustment f eature 1. Press the AUTO button on the remote control. For an RGB signal The vertical position, the horizontal position, the clock phase and the horizontal size will be automatically adjusted. And the aspect ratio will be automatically selected.
21 Using the magnify feature 1. Press the ON button of MAGNIFY on the remote control. The “MAGNIFY” indication will appear on the screen (although the indication will disappear in several seconds with no operation), and the projector will enter the MAGNIFY mode.
22 F r eezing the scr een 1. Press the FREEZE button on the remote control. The “FREEZE” indication will appear on the screen, and the projector will enter the FREEZE mode. T o exit the FREEZE mode and restore the screen to normal, press the FREEZE button again.
23 Operating Operating the computer screen CA UTION ►Mistaken use of the mouse/keyboard control could damage your equipment. • While using this function, please connect only with a computer . • Before connecting, read the manuals of the computer you will connect.
24 Multifunctional settings Multifunctional settings Using the menu function This projector has the following menus: PICTURE, IMAGE, INPUT , SETUP , SCREEN, OPTION, NETWORK and EASY MENU. EASY MENU cosists of functions often used, and the other menus are cl assified into each purpose.
25 Multifunctional settings EASY Menu Item Description ASPECT Using the buttons ◄/► switches the mode for aspect ratio. See the ASPECT item in the IMAGE menu ( 30 ). KEYSTONE Using the buttons ◄/► corrects the keystone distortion. See the item KEYSTONE of section SETUP menu.
26 Multifunctional settings Item Description MIRROR Using the buttons ◄/► switches the mode for mirror status. See the MIRROR item in the SETUP menu ( 34 ). RESET Performing this item resets all of the items of EASY MENU except FIL TER TIME and LANGUAGE.
27 Multifunctional settings PICTURE Menu Item Description BRIGHTNESS Using the buttons ▲/▼ adjusts the brightness. : Light Dark CONTRAST Using the buttons ▲/▼ adjusts the contrast. : Strong Weak GAMMA Using the buttons ▲/▼ switches the GAMMA mode.
28 Multifunctional settings Item Description COLOR TEMP Using the buttons ▲/▼ switches the mode of color temperature. HIGH MIDDLE LOW CUSTOM T o adjust CUSTOM Selecting the CUSTOM and then pressing the button ► or the ENTER button displays a dialog to aid you in adjusting the OFFSET and/or GAIN of the CUSTOM mode.
29 Multifunctional settings Item Description PROGRESSIVE Using the buttons ▲/▼ switches the progress mode. TV FILM TURN OFF • This function is performed only for an interlaced signal of a VIDEO input, an S-VIDEO input or CONPONENT VODEO input of 525i (480i) or 625i (576i) signal.
30 Multifunctional settings IMAGE Menu Item Description ASPECT Using the buttons ▲/▼ switches the mode for aspect ratio. For an RGB signal 4:3 16:9 NORMAL For a video signal / no signal 4:3 16:9 SMALL • The NORMAL mode keeps the original aspect ratio of the signal.
31 Multifunctional settings Item Description H SIZE Using the buttons ▲/▼ adjusts the horizontal size. Large Small • This item can be selected only for an RGB signal. • When this adjustment is excessive, the picture may not be displayed correctly .
32 Multifunctional settings INPUT Menu Item Description COLOR SP ACE Using the buttons ▲/▼ switches the mode for color space. AUTO RGB SMPTE240 REC709 REC601 • This item can be selected only for an RGB signal or a component video signal (except signals of 525i(480i)/625i(576i)/SCART RGB from the component video port).
33 Multifunctional settings INPUT Menu (continued) Item Description INFORMA TION Selecting this item displays a dialog titled “INPUT INFORMA TION”.
34 Multifunctional settings SETUP Menu Item Description KEYSTONE Using the buttons ▲/▼ corrects the keystone distortion. Upper in the data Lower in the data • The adjustable range of this function will vary with the type of input signal. At some signals, this function may not work well.
35 Multifunctional settings SCREEN Menu Item Description LANGUAGE Using the buttons ▲/▼ switches the OSD (On Screen Display) language. SUOMI POLSKI TÜRKÇE ENGLISH FRANÇAIS DEUTS.
36 Multifunctional settings Item Description ST ART UP Using the buttons ▲/▼ switches the mode for the start-up screen. The start-up screen is a screen displayed when no signal or an unsuitable signal is detected. MyScreen ORIGINAL TURN OFF MyScreen is a screen you can register as a desired screen.
37 Multifunctional settings Item Description MESSAGE Using the buttons ▲/▼ turns on/off the message function. TURN ON TURN OFF When the TURN ON is selected, the following message function works. “AUTO IN PROGRESS” while automatically adjusting ”NO INPUT IS DETECTED” ”SYNC IS OUT OF RANGE” "Searching….
38 Multifunctional settings OPTION Menu Item Description AUTO SEARCH Using the bu ttons ▲/▼ tu rns on/of f the automatic signal search func tion. TURN ON TURN OFF This function works with INPUT , RGB, and VIDEO buttons. When the TURN ON is selected, detecting no signal automatically cycles through input ports in the following order .
39 Multifunctional settings Item Description SERVICE Selecting this item displays the SERVICE menu. Select an item using the buttons ▲/▼, and press the button ► or the ENTER button on the remote control to execute the item.
40 NETWORK Menu MENU [RGB] IMAGE SETUP PICTURE INPUT OPTION EASY MENU SCREEN :SELECT NETWORK IP ADDRESS SUBNET MASK DATE AND TIME DHCP TURN.
41 Multifunctional settings Item Operation DEF AUL T GA TEW A Y Entering the DEF AUL T GA TEWA Y : Use the ▲/▼/◄/► buttons to en ter the DEF AUL T GA TEWA Y (therouter or PC that forwardstraffic to a destination outside of the subnet of the transmitting device) address.
42 Multifunctional settings Item Operation INFORMA TION INFORMA TION display : Use the ► or ENTER buttons to view network information and confirm settings.
43 Maintenance Maintenance Lamp WARNING HIGH VOL T AGE HIGH TEMPERA TURE HIGH PRESSURE ►The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time.
44 Lamp (continued) A lamp has a finite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor . Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them.
45 If the air filter becomes clogged by dust or the like, internal temperatures rise and could cause a fire, a burn and/or malfunction to the projector . When the indicators or a mes sag e p rom pts you to cle an t he a ir fil ter , cl ean the ai r fi lte r as so on a s possible.
46 Maintenance 4. Apply a vacuum cleaner to the air filter and the filter cover . Please replace the air filter when it is damaged or too soiled. 5. Replace the air filter in its original position. Secure the air filter in place by pressing each of the six locations.
47 1. T urn the projector off, and unplug the power cord. Allow the projector to cool sufficiently . 2. After making sure that the projector has cooled adequately , slowly turn over the projector , so that the bottom is facing. 3. Remove the battery cover .
48 Maintenance WARNING ►Before caring, make sure the power switch is off and the power cable is not plugged in, and then allow the projector to cool sufficiently . The care in a high temperature state of the projector could cause a burn and/or malfunction to the projector .
49 T roubleshooting R elated messages When the unit's power is on, messages such as those shown below may be displayed. When any such message is displayed on the screen, please follow the instructions described below .
50 T r oubleshooting R e gar ding the indicator lamps Lighting and flashing of the POWER indicator , the LAMP indicator , and the TEMP indicator have the meanings as described in the table below .
51 T r oubleshooting Regarding the indicator lamps (continued) POWER indicator LAMP indicator TEMP indicator Description Blinking In Red or Lighting In Red T urned off Blinking In Red The cooling fan is not operating. Please turn the power off, and allow the projector to cool down at least 20 minutes.
52 T r oubleshooting Phenomena that may be easy to be mistak en for machine def ects WARNING ►Never use the projector if abnormal operations such as smoke, strange odor , excessive sound, damaged casing or elements or cables, penetration of liquids or foreign matter , etc.
53 Pheno mena that may be e asy to be mis taken for mach ine defec ts (co ntinu ed) Phenomenon Cases not involving a machine defect Reference page Sound does not come out. The signal cables are not correctly connected. Correctly connect the audio cables.
54 Pheno mena that may be e asy to be mis taken for mach ine defec ts (co ntinu ed) Phenomenon Cases not involving a machine defect Reference page Pictures appear dark. The brightness and/or contrast are adjusted to an extremely low level. Adjust BRIGHTNESS and/or CONTRAST settings to a higher level using the menu function.
55 Warr anty And After-Ser vice W arranty and after-service If a problem occurs with the equipment, first refer to the “T roubleshooting” and run through the suggested checks. If this does not resolve the problem, please contact your dealer or service company .
56 Specifications Specifications (continued) Y R L AUDIO IN2 AUDIO OUT CONTROL RGB IN1 RGB IN 2 US B RGB OU T AUDIO IN1 LAN LINK ACT VIDEO S-VIDEO C B / P B C R / P R K 306 mm 249 mm 100 mm 86 mm.
An important point after buying a device Hitachi CP-S245WF (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hitachi CP-S245WF yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hitachi CP-S245WF - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hitachi CP-S245WF you will learn all the available features of the product, as well as information on its operation. The information that you get Hitachi CP-S245WF will certainly help you make a decision on the purchase.
If you already are a holder of Hitachi CP-S245WF, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hitachi CP-S245WF.
However, one of the most important roles played by the user manual is to help in solving problems with Hitachi CP-S245WF. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hitachi CP-S245WF along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
