Instruction/ maintenance manual of the product CP-A222WNMEF Hitachi
Go to page of 123
1 Projector CP-A222WN/CP-A302WN/CP-AW252WN User's Manual (detailed) Oper a ting Guide Thank you for purchasing this projector . ►Before using this product, please read all manuals for this product. Be sure to read “ Safety Guide ” first. After reading them, store them in a safe place for future reference.
2 Contents Introduction . .............. 3 Features . ..................... 3 Checking the contents of package ... 3 Part names . ................... 4 Setting up . ................ 7 Arrangement ................... 7 Connecting with your devices ....
3 Introduction • Keep the original packing materials, for future reshipment. Be sure to use the original packing materials when moving the projector . Use special caution for the lens. NO TE Introduction The projector provides you with the broad use by the following features.
4 Introduction (1) Lamp cover ( 106 ) The lamp unit is inside. (2) Control panel ( 5 ) (3) Elevator feet (x 2) ( 25 ) (4) Remote sensor ( 17 ) (5) Lens ( 11 0 ) (6) Intake vents (7) Filter cover ( 108 ) The air filter and intake vent are inside.
5 Introduction Par t names (continued) Control panel (1) ST ANDBY/ON button ( 19 ) (2) INPUT button ( 22 ) (3) POWER indicator ( 19, 1 14 ) (4) TEMP indicator ( 11 4 ) (5) LAMP indicat.
6 Introduction Par t names (continued) R emote control (1) VIDEO button ( 23 ) (2) COMPUTER button ( 23 ) (3) SEARCH button ( 24 ) (4) ST ANDBY/ON button ( 19 ) (5) ASPECT button ( .
7 Setting up Setting up (continued on next page) Install the projector according to the environment and manner the projector will be used in. Ar r angement Refer to table T- 1 or T- 2 and figures F-1 and F-2 at the end of User ’s Manual (concise) to determine the screen size and projection distance.
8 Setting up Arrangement (continued) (continued on next page) ►Place the projector in a cool place, and ensure that there is sufficient ventilation. The high temperature of the projector could cause fire, burns and/or malfunction of the projector .
9 Setting up Before connecting the projector to a device, consult the manual of the device to confirm that the device is suitable for connecting with this projector and prepare the required accessories, such as a cable in accord with the signal of the device.
10 Connecting with your devices (continued) • When AUT O is selected for the COMPUTER IN1 or COMPUTER IN2 port in COMPUTER IN of the INPUT menu, that port will accept component video signals ( 42 ).
11 Connecting with your devices (continued) (continued on next page) • Before connecting the projector to a computer , consult the computer ’s manual and check the compatibility of the signal level, the synchronization methods and the display resolution output to the projector .
12 (continued on next page) Connecting with your devices (continued) Setting up • If you insert a USB storage device, such as a USB memory , into the USB TYPE A port and select the port as the input source, you can view images stored in the device ( 88 ) .
13 Setting up USB storage device Connecting with your devices (continued) T o use network functions of the projector , connect the LAN port with the computer's LAN port, or with an access point that is connected to the computer with wireless LAN, using a LAN cable.
14 • If an oversized USB storage device blocks the LAN port, use a USB extension cable to connect the USB storage device. • The HDMI port of this model is compatible with HDCP (High-bandwidth Digital Content Protection) and therefore capable of displaying a video signal from HDCP compatible DVD players or the like.
15 Setting up Connecting to a po wer supply 1. Put the connector of the power cord into the AC IN (AC inlet) of the projector . 2. Firmly plug the power cord’s plug into the outlet. In a couple of seconds after the power supply connection, the POWER indicator will light up in steady orange.
16 Using the cable co v er Utilize the cable cover as the guard and blind for the connecting parts. 1. Connect the signal cables and the power cord to the projector first. 2. Combine parts as shown in figure, and assemble the cable cover . 3 . Insert the three knobs on the cable cover into the three holes on the projector as shown in the figure.
17 R emote control Remote control About the r emote control signal The remote control works with the projector ’s remote sensor . This projector has a remote sensor on the front. The sensor senses the signal within the following range when the sensor is active: 60 degrees (30 degrees to the left and right of the sensor) within 3 meters about.
18 R emote control Changing the fr equenc y of r emote contr ol signal The accessory remote control has the two choices on signal frequency Mode 1:NORMAL and Mode 2:HIGH. If the remote control does not function properly , attempt to change the signal frequency .
19 P ow er on/of f 1. Make sure that the power cord is firmly and correctly connected to the projector and the outlet. T ur ning on the po wer 2. Make sure that the POWER indicator is steady orange ( 11 4 ). 3. Confirm that there is nothing that the lens door hits while opening.
20 WARNING ►Never look into the projection lens or mirror while the projection lamp lights, since the projection lamp ray may cause a trouble on your eyes. ► Be careful not to pinch your finger with the lens door , to prevent an injury . ►Do not place the projector vertically with the lens door open as shown in the figure on the right.
21 P ow er on/of f ► Be careful not to pinch your finger with the lens door , to prevent an injury . ►Do not touch around the lamp cover and the exhaust vents during use or just after use, since it is too hot. ►Remove the power cord for complete separation.
22 VIDEO DOC.CAMERA KEYSTONE ASPECT SEARCH BLANK MUTE MY BUTTON COMPUTER MY SOURCE/ AUTO MAGNIFY PAGE DOWN ON OFF FREEZE UP 㧗 VOLUME FOCUS D-ZOOM Operating Operating 1. Adjusting the v olume Use the VOLUME + / VOLUME - buttons to adjust the volume.
23 VIDEO DOC.CAMERA KEYSTONE ASPECT SEARCH BLANK MUTE MY BUTTON COMPUTER MY SOURCE/ AUTO MAGNIFY PAGE DOWN ON OFF FREEZE UP 㧗 VOLUME FOCUS D-ZOOM Operating 1. Press VIDEO button on the remote control. Each time you press the button, the projector switches its input port from the current port as below .
24 1. Press ASPECT button on the remote control. Each time you press the button, the projector switches the mode for aspect ratio in turn. Selecting an aspect r a tio ● ASPECT button does not work when no proper signal is inputted. ● NORMAL mode keeps the original aspect ratio setting.
25 Operating Adjusting the zoom and f ocus Adjusting the pr ojector's ele va tor The projector has Front foot for inclinations and Rear foot for horizontals. Spacers on the each elevator foot are installed at the time of shipment, and projector is in a condition to be able to just project.
26 VIDEO DOC.CAMERA KEYSTONE ASPECT SEARCH BLANK MUTE MY BUTTON POSITION MENU COMPUTER MY SOURCE/ AUTO MAGNIFY PAGE DOWN ON OFF FREEZE UP 㧗 VOLUME FOCUS D-ZOOM Operating 1. Press AUTO button on the remote control. Pressing this button performs the following.
27 POSITION ESC MENU RESET ENTER 1. Press the POSITION button on the remote control while no menu is on screen, to display the D-SHIFT ( 44 ) dialog on screen. Adjusting the position 2. Use the ▲, ▼, ◄ and ► buttons to adjust the picture position.
28 VIDEO DOC.CAMERA KEYSTONE ASPECT SEARCH BLANK MUTE MY BUTTON COMPUTER MY SOURCE/ AUTO MAGNIFY PAGE DOWN ON OFF FREEZE UP 㧗 VOLUME Operating 1. Using the ma gnify f ea tur e 2. 3. 4. Press the MAGNIFY ON button on the remote control. The picture will be magnified, and the MAGNIFY dialog will appear on the screen.
29 Operating 1. Press BLANK button on the remote control. The BLANK screen will be displayed instead of the screen of input signal. Please refer to BLANK item in SCREEN menu ( 52 ). T o exit from the BLANK screen and return to the input signal screen, press BLANK button again.
30 POSITION ESC MENU RESET ENTER Operating 1. T o start the MENU, press the MENU button. The MENU you last used (EASY or ADV ANCED) will appear . EASY MENU has priority to appear just after powered on. Using the menu function 2. (1) Use the ▲/▼ cursor buttons to select an item to operate.
31 Operating Using the menu function (continued) 3. T o close the MENU, press the MENU button again or select EXIT and press the ◄ cursor button or ENTER button. Even if you do not do anything, the dialog will automatically disappear after about 30 seconds.
32 EASY MENU EASY MENU From the EASY MENU, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons. Then perform it according to the following table. Item Description ASPECT Using the ◄/► buttons switches the mode for aspect ratio.
33 EASY MENU Item Description PICTURE MODE Using the ◄/► buttons switches the picture mode. The picture modes are combinations of GAMMA and COLOR TEMP settings.
34 PICTURE menu PICTURE menu From the PICTURE menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table.
35 PICTURE menu (continued on next page) Item Description COLOR TEMP Using the ▲/▼ buttons switches the color temperature mode. T o adjust CUSTOM Selecting a mode whose name includes CUSTOM and then pressing the ► button or the ENTER button displays a dialog to aid you in adjusting the OFFSET and GAIN of the selected mode.
36 PICTURE menu Item Description SHARPNESS Using the ◄/► buttons adjusts the sharpness. Weak Strong • There may be some noise and/or the screen may flicker for a moment when an adjustment is made. This is not a malfunction. ACTIVE IRIS Using the ▲/▼ cursor buttons changes the active iris control mode.
37 IMAGE menu IMAGE menu From the IMAGE menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table.
38 IMAGE menu Item Description V POSITION Using the ◄/► buttons adjusts the vertical position. Down Up • Over-adjusting the vertical position may cause noise to appear on the screen. If this occurs, please reset the vertical position to the default setting.
39 IMAGE menu Item Description H PHASE Using the ◄/► buttons adjusts the horizontal phase to eliminate flicker . Right Left • This item can be selected only for a computer signal or a component video signal. This function is unavailable for a signal from the LAN , USB TYPE A , USB TYPE B or HDMI port.
40 INPUT menu INPUT menu From the INPUT menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table.
41 INPUT menu Item Description VIDEO FORMA T The video format for S-VIDEO port and VIDEO port can be set. (1) Use the ▲/▼ buttons to select the input port. (2) Using the ◄/► buttons switches the mode for video format. AUTO NTSC P AL SECAM N-P AL M-P AL NTSC4.
42 INPUT menu Item Description COMPUTER IN The computer input signal type for COMPUTER IN1 and IN2 ports can be set. (1) Use the ▲/▼ buttons to select the COMPUTER IN port to be set. (2) Use the ◄/► buttons to select the computer input signal type.
43 INPUT menu Item Description RESOLUTION The resolution for the COMPUTER IN1 and COMPUTER IN2 input signals can be set on this projector . (1) In the INPUT menu select the RESOLUTION using the ▲/▼ buttons and press the ► button. The RESOLUTION menu will be displayed.
44 SETUP menu SETUP menu From the SETUP menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table.
45 SETUP menu Item Description PICT . POSIT . H (CP-A W252WN) Using the ▲/▼ cursor buttons selects the horizontal picture position. LEFT MID RIGHT The PICT . POSIT . H is not changed if any of the following cases apply . • The ASPECT is set to 16:9 or 16:10.
46 SETUP menu Item Description PERFECT FIT This item allows you to adjust the shape of the projected image in each of the corners and sides. (1) Choose a corner or side to adjust using the ▲/▼/◄/► buttons and press the ENTER or INPUT button. (2) Adjust the distortion as below .
47 SETUP menu (continued on next page) Item Description PERFECT FIT (continued) • While the distortion is adjusted with the PERFECT FIT function, keystone adjustment feature is unavailable. T o correct the keystone distortion, reset the adjustment of all the corners and sides.
48 SETUP menu Item Description INST ALLA TION Pressing the ►button displays the dialog for changing the INST ALLA TION setting. Use the ▲/▼ buttons to select the desired setting on the INST ALLA TION dialog.
49 SETUP menu Item Description MONITOR OUT While the image signal from the input port chosen in step (1) is projected, the image signal from the input port selected in step (2) is output to MONITOR OUT port. (1) Choose a picture input port using ▲/▼ buttons.
50 A UDIO menu AUDIO menu From the AUDIO menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or the ENTER button to execute the item. Then perform it according to the following table.
51 A UDIO menu Item Description MIC LEVEL Using the ▲/▼ buttons switches the input level to match that of the microphone connected to the MIC port. HIGH LOW HIGH: for a microphone with an amplifier . LOW: for a microphone without an amplifier .
52 SCREEN menu SCREEN menu From the SCREEN menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table.
53 SCREEN menu Item Description MyScreen This item allows you to capture an image for use as a MyScreen image which can be used as the BLANK screen and ST ART UP screen. Display the image you want to capture before executing the following procedure. Selecting this item displays a dialog titled “MyScreen”.
54 SCREEN menu Item Description MyScreen Lock Using the ▲/▼ buttons turns on/off the MyScreen lock function. ON OFF When the ON is selected, the item MyScreen is locked.
55 SCREEN menu Item Description SOURCE NAME Each input port for this projector can have a name applied to it. (1) Use the ▲/▼ buttons on the SCREEN menu to select SOURCE NAME and press the ► or ENTER button. The SOURCE NAME menu will be displayed.
56 SCREEN menu Item Description SOURCE NAME ( Continued ) (6) The current name will be displayed on the first line. Use the ▲/▼/◄/► buttons and the ENTER or INPUT button to select and enter characters. T o erase 1 character at one time, press the RESET button or press the ◄ and INPUT button at the same time.
57 SCREEN menu Item Description C.C. (Closed Caption) The C.C. is the function that displays a transcript or dialog of the audio portion of a video, files or other presentation or other relevant sounds. It is required to have NTSC format video or 480i@60 format component video source supporting C.
58 OPTION menu OPTION menu From the OPTION menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item, except for the items LAMP TIME and FIL TER TIME.
59 OPTION menu Item Description AUTO POWER OFF Using the ▲/▼ buttons adjusts the time to count down to automatically turn the projector off. Long (max. 99 minutes) Short (min. 0 minute = DISABLE) When the time is set to 0, the projector is not turned off automatically .
60 OPTION menu Item Description LAMP TIME The lamp time is the usage time of the lamp, counted after the last resetting. It is shown in the OPTION menu. Pressing the RESET button on the remote control or the ► button of the projector displays a dialog.
61 OPTION menu Item Description MY BUTT ON This item is to assign one of the following functions to MY BUTT ON 1/2 on the remote control ( 6 ). (1) Use the ▲/▼ buttons on the MY BUTT ON menu to select a MY BUTTON - (1/2) and press the ► or ENTER button to display the MY BUTT ON setup dialog.
62 OPTION menu Item Description MY BUTT ON ( Continued ) • ACTIVE IRIS: Changes the active iris mode. • PICTURE MODE: Changes the PICTURE MODE ( 33 ).
63 OPTION menu Item Description SERVICE Selecting this item displays the SERVICE menu. Select an item using the ▲/▼ buttons, and press the ► button or the ENTER button on the remote control to execute the item. AL TITUDE Using the ▲/▼ buttons switches the rotation speed of the cooling fans.
64 OPTION menu Item Description SERVICE (continued) KEY LOCK (1) Use the ▲/▼ buttons to select CONTROL P ANEL or REMOTE CONTROL. (2) Use the ◄/► buttons to turn the key lock function on/off. When ON is selected, all buttons on the projector or remote control except the ST ANDBY/ON button are locked.
65 OPTION menu Item Description SERVICE (continued) REMOTE FREQ. (1) Use the ▲/▼ button to change the projector's remote sensor frequency setting ( 17, 18 ). 1:NORMAL 2:HIGH (2) Use the ◄/► button to change the projector's remote sensor on or off.
66 OPTION menu Item Description SERVICE (continued) COMMUNICA TION (continued) COMMUNICA TION TYPE Select the communication type for transmission via the CONTROL port. NETWORK BRIDGE: Select this type, if it is required to control an external device as a network terminal, via this projector from the computer .
67 OPTION menu Item Description SERVICE (continued) COMMUNICA TION (continued) RESPONSE LIMIT TIME Select the time period to wait for receiving response data from other device communicating by the NETWORK BRIDGE and the HALF-DUPLEX through the CONTROL port.
68 OPTION menu Item Description SERVICE (continued) CLONING (continued) The following items are exempted. OPTION: LAMP TIME, FIL TER TIME, SERVICE(GHOST) NETWORK: WIRELESS AND WIRED SETUP (IP ADDRESS,.
69 OPTION menu Item Description SERVICE (continued) CLONING (continued) Load MyScreen data • Please save the image data as "pj_logo.bmp" or "pj_logo.gif" into USB memory . • Please note that the only compatible formats are as follows.
70 OPTION menu Item Description SERVICE (continued) CLONING (continued) Loading function (continued) • Please note that the saved data of KEYSTONE under SETUP menu cannot be loaded if TRANSITION DETECTOR under SECURITY menu is ON.
71 NETWORK menu Remember that incorrect network settings on this projector may cause trouble on the network. Be sure to consult with your network administrator before connecting to an existing access point on your network. Select “NETWORK” from the main menu to access the following functions.
72 NETWORK menu Item Description WIRELESS SETUP (continued) DHCP (Dynamic Host Configuration Protocol) Use the ▲/▼ buttons to turn DHCP on/of f. ON OFF Select OFF when the network does not have DHCP enabled. T o save the setting, press the ► button.
73 NETWORK menu Item Description WIRELESS SETUP (continued) DA TE AND TIME Use the ▲/▼/◄/► buttons to enter the Y ear (last two digits), Month, Date, Hour and Minute. • When this item is set, the same item in the WIRED SETUP menu is overwritten with the same setting ( 77 ).
74 NETWORK menu Item Description WIRELESS SETUP (continued) SSID Use the ▲/▼ buttons to select the SSID to display the SSID menu. #1 DEF AUL T #2 DEF AUL T #3 DEF AUL T #5 CUSTOM #4 DEF AUL T Select one of the DEF AUL T (#1~#4) and press ► or ENTER button.
75 NETWORK menu Item Description WIRELESS INFORMA TION "Selecting this item displays the WIRELESS_INFORMA TION dialog for viewing the wireless LAN settings." Use the ▲/▼ buttons to switch the page. The first page shows the wireless LAN settings.
76 NETWORK menu Item Description WIRED SETUP Selecting this item displays the WIRED SETUP menu for the wired LAN. Use the ▲/▼ buttons to select an item, and the ► or ENTER button on the remote control to perform the item. DHCP (Dynamic Host Configuration Protocol) Use the ▲/▼ buttons to turn DHCP on/of f.
77 NETWORK menu Item Description WIRED SETUP (continued) TIME DIFFERENCE Use the ▲/▼ buttons to enter the TIME DIFFERENCE. Set the same TIME DIFFERENCE as the one set on your computer . If unsure, consult your IT manager . Use the ► button to return to the menu after setting the TIME DIFFERENCE.
78 NETWORK menu Item Description PROJECTOR NAME (1) Use the ▲/▼ buttons on the NETWORK menu to select the PROJECTOR NAME and press the ► button. The PROJECT OR NAME dialog will be displayed. (2) The current PROJECTOR NAME will be displayed on the first 3 lines.
79 NETWORK menu Item Description MY IMAGE Selecting this item displays the MY IMAGE menu. Use the application to transfer the im- age data. It can be downloaded from the Hitachi web site.
80 NETWORK menu Item Description PRESENT A TION Selecting this item displays the PRESENT A TION menu. Use ▲/▼ buttons to select one of the following items, then press ► or ENTER button to use the function. • T o use Network Presentation, an exclusive application, "LiveV iewer" is required.
81 NETWORK menu Item Description PRESENT A TION (continued) MUL TI PC MODE (continued) • T o change from Single PC mode to Multi PC mode, press ► button to choose OK in the dialog and press the ENTER or INPUT button.
82 SECURITY menu Item Description SECURITY P ASSWORD CHANGE (1) Use the ▲/▼ buttons on the SECURITY menu to select SECURITY P ASSWORD CHANGE and press the ► button to display the ENTER NEW P ASSWORD box. (2) Use the ▲/▼/◄/► buttons to enter the new password.
83 SECURITY menu Item Description MyScreen P ASSWORD The MyScreen P ASSWORD function can be used to prohibit access to the MyScreen function and prevent the currently registered MyScreen image from being overwritten.
84 SECURITY menu Item Description PIN LOCK PIN LOCK is a function which prevents the projector from being used unless a registered Code is input. 1 T urning on the PIN LOCK 1-1 Use the ▲/▼ buttons on the SECURITY menu to select PIN LOCK and press the ► button or the ENTER button to display the PIN LOCK on/off menu.
85 SECURITY menu Item Description TRANSITION DETECTOR If this function is set to ON and the vertical angle of the projector or the INST ALLA TION setting is different from the previous recorded setting, the TRANSITION DETECTOR ON alarm will be displayed and the input signal will not be displayed.
86 SECURITY menu Item Description MY TEXT P ASSWORD The MY TEXT P ASSWORD function can prevent the MY TEXT from being overwritten. When the password is set for the MY TEXT ; • The MY TEXT DISPLA Y menu will be unavailable, which can prohibit changing the DISPLA Y setting.
87 SECURITY menu Item Description MY TEXT DISPLA Y (1) Use the ▲/▼ buttons on the SECURITY menu to select the MY TEXT DISPLA Y and press the ► or ENTER button to display the MY TEXT DISPLA Y on/off menu. (2) Use the ▲/▼ buttons on the MY TEXT DISPLA Y on/of f menu to select on or off.
88 Presentation tools Presentation tools The PC-LESS Presentation reads image and audio data from the storage media inserted into the USB TYPE A port and displays the image in the following modes. The PC-LESS Presentation can be started by selecting the USB TYPE A port as the input source.
89 Presentation tools • Files with a resolution larger than the following are not supported. CP-A222WN, CP-A302WN: 1024 x 768 (Still) ， 768 x 576 (Movie) CP-A W252WN: 1280 x 800 (Still) ， 768 x 576 (Movie) (* Some computers may not support 1280 x 800.
90 Presentation tools PC-LESS Presentation (continued) The SETUP menu for the selected image Item Functions SETUP Use the ◄/► cursor buttons to switch each setting or use the ► cursor button to execute the functions as follows. RETURN Press the ► cursor button or ENTER to return to the Thumbnail screen.
91 Presentation tools Y ou can also control the images by using the menu on the Thumbnail screen. PC-LESS Presentation (continued) Operating by the menu on the Thumbnail screen Item Functions Moves to an upper folder . SORT Allows you to sort files and folders as following.
92 Presentation tools Presentation tools PC-LESS Presentation (continued) • These operations are not accessible while the projector OSD is displayed.
93 Presentation tools PC-LESS Presentation (continued) The Full Screen mode shows a full display image. T o display in Full Screen mode, select an image in the Thumbnail screen. Then press the ENTER button on the remote control, the INPUT button on the control panel or click [ ENTER] on the W eb Remote Control.
94 Presentation tools PC-LESS Presentation (continued) Button operation Functions The remote control Control panel Web Remote Control ▲ ▲ [▲] (Play) / (Pause) toggle ► ► [►] (FF) Fast-forward ◄ ◄ [◄] (REW) Fast-rewind ENTER INPUT [ ENTER ] (Stop), Displays Thumbnail.
95 Presentation tools PC-LESS Presentation (continued) Slidesho w mode While the Slideshow is displayed, the following button operations are enabled when still images are displayed, and the same button operations in the Full Screen mode are enabled when movies are displayed.
96 Presentation tools PC-LESS Presentation (continued) Y ou can play the Slideshow at your desired configuration. Configure the Slideshow items in the Thumbnail. 1) RETURN : Returns to the thumbnail mode. 2) PLA Y : Play the Slideshow . 3) ST ART : Set the beginning number of the Slideshow .
97 Presentation tools PC-LESS Presentation (continued) Playlist The Playlist is a DOS format text file, which decides the order of displayed still image files in the Thumbnail or Slideshow . The playlist file name is “playlist.txt” and it can be edited on a computer .
98 Presentation tools USB Display(W indows computer) The projector can display images transferred from a computer via an USB cable ( 10 ). Select the USB DISPLA Y for the USB TYPE B item in the OPTION menu.
99 Presentation tools This application will appear in the Windows notification area once it starts. Y ou can quit the application from your computer by selecting “Quit” on the menu. • The “LiveViewer” (refer to the Network Guide ) and this application cannot be used at the same time.
100 Presentation tools Display : The Floating menu is displayed, and the icon disappears from the Windows notification area. Quit : The application is closed, and the icon disappears from the Windows notification area. The menu shown in the right will be displayed when you right-click the application icon in the Windows notification area.
101 Presentation tools If you select the Option button on the Floating menu, the Options window is displayed. Optimize P erf or mance The “LiveV iewer Lite for USB” captures screenshots in JPEG data and sends them to the projector . The “LiveV iewer Lite for USB” has two options that have different compression rate of JPEG data.
102 Presentation tools USB Display(Mac computer) The projector can display images transferred from a computer via an USB cable ( 10 ). • The image transmission from the computer is suspended while the password-protected screen saver is running. T o resume the transmission, exit the screen saver .
103 Presentation tools • The “LiveViewer” (refer to the Network Guide ) and this application cannot be used at the same time. If you connect your computer to the projector by using a USB cable while the “LiveV iewer” is running, the following message will be displayed.
104 Presentation tools USB Display(Mac computer) (continued) Menu If you select “Display” on the Right-Click menu, the Floating menu shown in the right will appear on your computer screen. q Start capture button The transmission to the projector is started and the images will be displayed.
105 Presentation tools If you select the Option button on the Floating menu, the Options window is displayed. Optimize P erf or mance The “LiveV iewer Lite for USB” captures screenshots in JPEG data and sends them to the projector . The “LiveV iewer Lite for USB” has two options that have different compression rate of JPEG data.
106 Maintenance Maintenance A lamp has finite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor . Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them.
107 Maintenance Lamp war ning Replacing the lamp (continued) HIGH VOL T AGE HIGH TEMPERA TURE HIGH PRESSURE ► The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time.
108 Maintenance The air filter unit of this projector consists of a filter cover , two kinds of filters, and a filter frame. The new double large filters system is expected to function longer . However , please check and clean it periodically to keep ventilation needed for normal operation of the projector .
109 Maintenance Cleaning and replacing the air filter (continued) 9. T urn the projector on and reset the filter time using the FIL TER TIME item in the EASY MENU. ►Before taking care of the air filter , make sure the power cable is not plugged in, then allow the projector to cool sufficiently .
11 0 Caring f or the mir r or and lens If the projection mirror or lens is flawed, soiled or fogged, it could cause deterioration of display quality . Please take care of the mirror and lens, being cautious of handling. 1. T urn the projector of f and unplug the power cord from the power outlet.
111 Maintenance Other car e In order to ensure the safe use of your projector , please have it cleaned and inspected by your dealer about once every year . ►Before caring, make sure the power cord is not plugged in, and then allow the projector to cool sufficiently .
11 2 T roubleshooting T roubleshooting If an abnormal operation should occur , stop using the projector immediately . Otherwise if a problem occurs with the projector , the following checks and measures are recommended before requesting repair . If this does not resolve the problem, please contact your dealer or service company .
11 3 Message Description The horizontal or vertical frequency of the input signal is not within the specified range. Please confirm the specs for your projector or the signal source specs. An improper signal is input. Please confirm the specs for your projector or the signal source specs.
11 4 T roubleshooting R e gar ding the indicator lamps When operation of the LAMP , TEMP and POWER indicators differs from usual, check and cope with it according to the following table. POWER indicator LAMP indicator TEMP indicator Description Lighting In Orange T urned off T urned off The projector is in a standby state.
11 5 T roubleshooting Regarding the indicator lamps (continued) POWER indicator LAMP indicator TEMP indicator Description Blinking In Red or Lighting In Red T urned off Lighting In Red There is a possibility that the interior portion has become heated.
11 6 • When the interior portion has become overheated, for safety purposes, the projector is automatically shut down, and the indicator lamps may also be turned of f.
11 7 T roubleshooting Phenomena tha t may be easy to be mistak en f or mac hine def ects About the phenomenon confused with a machine defect, check and cope with it according to the following table. Phenomenon Cases not involving a machine defect Reference page Power does not come on.
11 8 T roubleshooting Phenomena that may be easy to be mistaken for machine defects (continued) Phenomenon Cases not involving a machine defect Reference page Sound does not come out. The signal cables are not correctly connected. Correctly connect the audio cables.
11 9 T roubleshooting Phenomena that may be easy to be mistaken for machine defects (continued) Phenomenon Cases not involving a machine defect Reference page No pictures are displayed. The signal cables are not correctly connected. Correctly connect the connection cables.
120 T roubleshooting Phenomenon Cases not involving a machine defect Reference page Video screen display freezes. The FREEZE function is working. Press FREEZE button to restore the screen to normal. 29 Colors have a faded- out appearance, or Color tone is poor .
121 Phenomenon Cases not involving a machine defect Reference page The sound or image is unstable or is output intermittently . When LAN, USB TYPE A or USB TYPE B port is selected, some ports of the output may be missing due to signal processing delay .
122 Phenomenon Cases not involving a machine defect Reference page When the projector is connected to wired LAN, it powers off and on as described below . Powers off POWER indicator blinks in orange a few times Goes into standby mode Disconnect the LAN cable and check that the projector is working properly .
123 Specifications Specifications End User License Ag reement for the Projector Software • Software in the projector consists of the plural number of independent software modules and there exist our copyright or/and third party copyrights for each of such software modules.
An important point after buying a device Hitachi CP-A222WNMEF (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hitachi CP-A222WNMEF yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hitachi CP-A222WNMEF - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hitachi CP-A222WNMEF you will learn all the available features of the product, as well as information on its operation. The information that you get Hitachi CP-A222WNMEF will certainly help you make a decision on the purchase.
If you already are a holder of Hitachi CP-A222WNMEF, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hitachi CP-A222WNMEF.
However, one of the most important roles played by the user manual is to help in solving problems with Hitachi CP-A222WNMEF. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hitachi CP-A222WNMEF along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
