Instruction/ maintenance manual of the product 210313 Hitachi
Go to page of 16
Instructions – Parts List GRACO INC.ąP .O. BOX 1441ąMINNEAPOLIS, MNą55440-1441 Copyright 1975, Graco Inc. is registered to I.S. EN ISO 9001 307160R Read warnings and instructions.
2 307160 T able of Contents W arnings 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installation 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Operation 8 . . . . . . . . . . . . . . . . . .
3 307160 W ARNING INJECTION HAZARD Spray from the gun/valve, leaks or ruptured components can inject fluid into your body and cause ex- tremely serious injury , including the need for amputation. Fluid splashed in the eyes or on the skin can also cause serious injury .
4 307160 W ARNING FIRE AND EXPLOSION HAZARD Improper grounding, poor ventilation, open flames or sparks can cause a hazardous condition and re- sult in a fire or explosion and serious injury . D Ground the equipment and the object being sprayed. Refer to Grounding on page 5.
5 307160 Installation General Information NOTE: Reference numbers and letters in parentheses in the text refer to the callouts in the figures and the parts drawing. NOTE: Always use Genuine Graco Parts and Acces- sories, available from your Graco distributor .
6 307160 Installation Mount the pump to suit the type of installation planned. Pump dimensions and mounting hole layout are shown on page 14. CAUTION The hydraulic supply system must be kept clean at all times to avoid damage to the motor and hydraulic power supply .
7 307160 Installation 0627A KEY A B C D E F G H J K L M N P Q R S T Fluid Hose to Gun Fluid Drain V alve Suction Hose Hydraulic Return Line Hydraulic Return Shutoff V alve Pressure Gauge Flow Control .
8 307160 Operation Pressure Relief Procedure W ARNING INJECTION HAZARD Fluid under high pressure can be in- jected through the skin and cause seri- ous injury .
9 307160 Operation W ARNING COMPONENT RUPTURE HAZARD T o reduce the risk of overpressurizing your system, which could cause compo- nent rupture and serious injury , never exceed the specified Maximum Hydraulic Input Pressure to the pump (see the T echnical Data on page 15).
10 307160 Maintenance Carefully monitor your fluid supply . If your pump us running too fast, or accelerates quickly , it is probably out of fluid. Shut off the hydraulic power supply imme- diately to prevent damage to the pump.
11 307160 T roubleshooting W ARNING T o reduce the risk of serious injury whenever you are instructed to relieve pressure, always follow the Pressure Relief Procedure on page 8. Before servicing this equipment, always make sure to relieve the pressure.
12 307160 Service Fig. 3 06640 1 11 8 7 1 1 12 3 6 5 T 4 9 1 T orque to 40–50 ft-lb (54–68 N S m) NOTE: T o service the displacement pump, refer to manual 308043, supplied. NOTE: T o service the hydraulic motor , refer to manual 308158, supplied. Disassembly (See Fig.
13 307160 Parts 06640 11 8 7 1 1 12 3 6 5 4 9 Ref. No. Part N o. Description Qty . 1 100103 PIN, cott er; 1.5” (38.1 mm) long 2 3 101712 LOCKNUT ; 5/8–1 1; with nylon insert 3 4 101936 NUT , hex, jam; 3/4–10 1 5 158674 O-RING; nitrile rubber 1 6 16791 1 ROD, tie; 7” (177.
14 307160 Dimensions 06641 48.1” (1220 mm) 23.2” (585 mm) 3/4 npt inlet 1” npt outlet 2” npt fluid inlet 1–1/2” npt fluid outlet Mounting Hole Layout 06595 gasket 161806 four 0.437” (1 1.1 mm) holes on 10.5” (267 mm) bolt circle 45 _ 90 _ 1.
15 307160 T echnical Data Maximum hydraulic input pressure 1500 psi (10.3 MPa, 103 bar) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Maximum pump outlet pressure 1000 psi (7.0 MPa, 69 bar) . . . . . . . . . .
16 307160 Graco Standard W arranty Graco warrants all equipment manufactured by Graco and bearing its name to be free from defects in material and workmanship on the date of sale by a n authorized Graco distributor to the original purchaser for use.
An important point after buying a device Hitachi 210313 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hitachi 210313 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hitachi 210313 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hitachi 210313 you will learn all the available features of the product, as well as information on its operation. The information that you get Hitachi 210313 will certainly help you make a decision on the purchase.
If you already are a holder of Hitachi 210313, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hitachi 210313.
However, one of the most important roles played by the user manual is to help in solving problems with Hitachi 210313. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hitachi 210313 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
