Instruction/ maintenance manual of the product 210-208 Hitachi
Go to page of 12
308–043 Rev . F Supersedes Rev . C and PCN D INSTRUCTIONS-P ARTS LIST INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. Displacement Pump 1000 psi (70 bar , 7 MPa) Maximum Working Pressure Model 210–208, Series F GRACO INC.
T able of Contents W arnings 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Setup/Operation 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Service 6 . . . . . . .
INJECTION HAZARD Spray from the gun, leaks or ruptured components can inject fluid into your body and cause extremely serious injury , including the need for amputation. Fluid splashed in the eyes or on the skin can also cause serious injury .
FIRE AND EXPLOSION HAZARD Improper grounding, poor ventilation, open flames or sparks can cause a hazardous condition and result in a fire or explosion and serious injury . D Ground the equipment and the object being sprayed.
Setup/Operation General Information NOTE: Reference numbers and letters in parentheses in the text refer to the callouts in the figures and the parts drawing. NOTE: Always use Genuine Graco Parts and Acces - sories, available from your Graco distributor .
Service Notes D Repair Kit 223–439 is available to service the pump. For the best results, use all the kit parts. Parts included in the kit are marked with an asterisk in the text, for example (15*). D If possible, have all the necessary replacement parts available before you begin the repair , to reduce down time.
Service Fig. 1 4 2 3 1 5 06644 13 14 41 36 Lower Holes 1 1 28 *15 42 18** 38 32 24* 39 2 3 T orque to 50–60 ft-lb (68–81 N S m) T ighten in a criss-cross pattern THROA T .
Service Throat Packings (Fig. 1) 1. Remove the intake valve and the cylinder (38) as explained in the previous sections. 2. Remove the packing nut/wet-cup (39). 3. Pull the displacement rod (36) out of the bottom of the outlet housing (41).
Notes.
Parts 06645 36 15 28 *24 38 32 †18 42 28 15* 24* 25 35 31* 30 31* 43 49 16† 39 †47 *45 *46 44* 13 14 41 32.
Parts Model 210–208, Series F Displacement Pump Includes items 13–49 Ref Part . y t Q n o i t p i r c s e D . o N . o N 13 100–127 NUT , hex; 5/8–1 1 4 14 100–128 LOCKW ASHER, spring; 5/8” 4 15* 100–579 PIN, cotter; 1” (25.4 mm) long 4 16 † 101–178 BALL; 1.
The Graco W arranty and Disclaimers W ARRANTY Graco warrants all equipment listed in this manual which is manufactured by Graco and bearing its name to be free from defects in material and workmanship on the date of sale by an authorized Graco distributor to the original purchaser for use.
An important point after buying a device Hitachi 210-208 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hitachi 210-208 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hitachi 210-208 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hitachi 210-208 you will learn all the available features of the product, as well as information on its operation. The information that you get Hitachi 210-208 will certainly help you make a decision on the purchase.
If you already are a holder of Hitachi 210-208, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hitachi 210-208.
However, one of the most important roles played by the user manual is to help in solving problems with Hitachi 210-208. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hitachi 210-208 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
