Instruction/ maintenance manual of the product G-100ES Herrmidifier
Go to page of 16
G-100ES Duct Mount Humidifier Installation • Operation • Maintenance CAUTION: READ INST ALLA TION, OPERA TION, AND MAINTENANCE INSTRUCTIONS CAREFULL Y FOR SAFE OPERA TION.
T able of Contents Introduction ..........................................1 Specifications ........................................2 Capacity Selection Guide ......................3 Operation ..............................................3 Installation .
1 Intr oduction Introduction The benefits of a properly humidified environment (35-50%, Relative Humidity) are many . They include both personal comfort as well as the preservation of furniture, draperies, carpets, wooden floors and cabinets, paintings, pianos, etc.
2 Specifications To improve the ef ficiency of your humidifier , and to reduce the possibility of a health hazard, it is recommended that you take the following precautions: • Follow the manufacturer’ s recommended cleaning and maintenance instructions.
3 Capacity Selection Guide Operation This humidifier operates using the evaporative principle in a quiet, efficient and automatic manner . It is constructed of the highest quality , engineering grade materials to assure superior performance and durability .
4 Operation Start Up 1. Open the saddle valve and check for leaks at the connections. 2. T urn the furnace on and check for proper operation. 3. T urn the humidistat to the highest level (past 60%) and the humidifier should begin to operate (the humidifier should stop when the humidistat is turned off, or when the furnace blower shuts off).
5 Installation Read the instructions in the furnace installation manual carefully before attempting installation or operation of the humidifier . Failure to follow these instructions may result in improper installation and therefore, void the manufacturer’ s warranty .
6 Mounting Locations 1. This humidifier may be installed on either the supply or return plenum. The supply plenum is the preferred location because of higher evaporative capacity results. When there is insufficient space on the warm air plenum, the unit can be installed on the return duct.
7 Maintenance Maintenance of Y our Humidifier Y our humidifier , as all appliances, requires periodic cleaning and maintenance to ensure efficient and safe operation. The necessity to clean your humidifier is substantially the result of impurities coming in through your water supply , which feeds the humidifier .
8 Maintenance To Inspect and Replace the Evaporator Pad: It is recommended that the evaporator pad in the humidifier be replaced annually to maintain efficient operation. However , more frequent replacement may be necessary in areas of poor water quality .
9 Tr oubleshooting Common Questions & Answers Q. My humidity is too low . Why isn’t the humidifier working? A. This is one of the most common questions from homeowners with new humidifiers. There are many factors that decide how well a home will be humidified.
10 Tr oubleshooting Symptom Humidity level is not being maintained Humidifier will not turn on W ater flows through the humidifier constantly Rust is developing around the humidifier Possible causes E.
11 Description of Parts Description of Parts Solenoid V alve All brass construction, controls the flow of water to the humidifier . The solenoid valve will make a clicking sound as the plunger pin opens and closes. If this part fails to operate correctly , water will flow continuously through the humidifier and down the drain.
12 Parts list 1 2 3 4 5 6 7 7a 8 9 10 11 12 12a 13 14 15 16 17 17a Base Brass solenoid valve assembly 24V AC Replacement cone mesh filters (12 pack only) Drain tray assembly Replacement evaporator pad.
13 Unit Diagram 1 2 3 4 8 9 10 11 12 13 14 15 16 7 17 5 6.
14 Wa rranty Humidifier Limited T wo Y ear Warranty This limited warranty covers Herrmidifier Residential T ype Humidifiers, excluding duct work, wiring and installation. The manufacturer warrants that all new Herrmidifier Humidifiers are free from defects in material and workmanship under normal, non-commercial use and service.
An important point after buying a device Herrmidifier G-100ES (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Herrmidifier G-100ES yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Herrmidifier G-100ES - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Herrmidifier G-100ES you will learn all the available features of the product, as well as information on its operation. The information that you get Herrmidifier G-100ES will certainly help you make a decision on the purchase.
If you already are a holder of Herrmidifier G-100ES, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Herrmidifier G-100ES.
However, one of the most important roles played by the user manual is to help in solving problems with Herrmidifier G-100ES. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Herrmidifier G-100ES along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
