Instruction/ maintenance manual of the product 6 Henny Penny
Go to page of 9
59 I nstallation Refer to the follo wing pages for important information regarding the installation of LCS and L CG ClimaPlus Combis. I t is recommended that installation be accomplished by a certified and properly trained technician. NO TE: When installing a ClimaPlus combi, humidity calibration must be performed.
60 U nit weights: LCS 6: 270 lbs. (123 kg) LCG 6 335 lbs. (152 kg) LCS 10 334 lbs. (152kg) LCG 10 384 lbs. (174 kg) LCS 1020 484 lbs. (220 kg) LCG 1020 584 lbs. (265 kg) LCS 20 686 lbs. (312 kg) LCG 20 798 lbs. (362 kg LCS 40 972 lbs. (442 kg) LCG 40 888 lbs.
61 Choose conductor size according abo ve tables and your local r egulations. IMPORT ANT Gas units are v oltage specific. Supply voltage must match v oltage rated on data plate. ■ Gas units are supplied with gr ounded power cord and plug. ■ Electric units ar e NOT supplied with po wer cord.
■ Once conversion has been completed, a “ total reset ” of the CPU-PCB must be done. Recor d all end-user (custom) programs before undertaking a T otal Reset. ■ Secur e all panels and covers. T otal r eset ■ T urn on unit. ■ P ress and hold IQ T Sensor key , IQT key , and PR OG/ST AR T simultaneously and turn unit off.
63 Fig. 12 Fig. 13 CB A Fig. 14 WA WA WZ INST ALLA TION W ater supply 9) Drain Connection (W A) ■ F or drain connection (F ig. 12) use only steam temperature r esistant pipe, diameter 2 in. (50 mm) and constant slope 5%. N o hose should be used. ■ Dir ect drain connection is possible, ventilated gap is an integrated part of the appliance (F ig.
64 General 11) T echnical Data W orking place specific noise level: <70dB A verage water consumption during operation: M odel 6: 3.17 gal/hr (0.2 l/min.) M odel 10: 6.7 gal/hr (0.42 l/min.) M odel 1020: 10.9 gal/hr (.069 l/min.) M odel 20: 13.2 gal/hr (0.
DO NO T attempt to use any type of gas other than that specified on the data plate. Incorr ect gas supply could result in fire or explosion resulting in sev ere injuries and/or property damage.
66 During pr essure testing note the following: 1. The unit and its individual shut-off valves must be disconnected from the gas supply piping system during any pressure testing of that system when test pressures ex ceed 1 ⁄ 2 psig (3.45kP a). T urn OFF main gas shut-off valve or main gas supply line.
67 U tilize elbows when necessary to avoid sharp kinks or excessive bending. F or ease of mov ement, install with a “ lazy ” loop. Gas appliance must be disconnected prior to maximum mov ement. (Minimum mov ement is permissible to disconnect gas line.
An important point after buying a device Henny Penny 6 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Henny Penny 6 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Henny Penny 6 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Henny Penny 6 you will learn all the available features of the product, as well as information on its operation. The information that you get Henny Penny 6 will certainly help you make a decision on the purchase.
If you already are a holder of Henny Penny 6, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Henny Penny 6.
However, one of the most important roles played by the user manual is to help in solving problems with Henny Penny 6. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Henny Penny 6 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
