Instruction/ maintenance manual of the product None Heath Zenith
Go to page of 2
AUTO OFF ON Single P ole Motion Sensing Switch The Single P ole Motion Sensing Switch detects motion to turn on lights for an adjustable amount of time. A built-in photo cell can be set to keep lights off when the lights aren't needed. The unit has excellent sensitivity and a wide 150° detection range.
There are 6 preset selections for the amount of time the lights sta y on: T est (5 seconds), 1, 5, 10, 15, and 20 minutes. Use a small, phillips screw dr iver to adjust the TIME control (see Figure 4). T urn the TIME control until it “snaps” into the desired time position.
An important point after buying a device Heath Zenith None (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Heath Zenith None yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Heath Zenith None - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Heath Zenith None you will learn all the available features of the product, as well as information on its operation. The information that you get Heath Zenith None will certainly help you make a decision on the purchase.
If you already are a holder of Heath Zenith None, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Heath Zenith None.
However, one of the most important roles played by the user manual is to help in solving problems with Heath Zenith None. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Heath Zenith None along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
