Instruction/ maintenance manual of the product II-B Hearth and Home Technologies
Go to page of 40
Heat & Glo LifeStyle Collection • T wilight-II-B • 2108-900 Rev . G • 8/07 1 Model: T wilight-II-B • Do not store or use gasoline or other fl am- mable vapors and liquids in the vicinity of this or any other appliance. • What to do if you smell gas - Do not try to light any appliance - Do not touch any electrical switch.
Heat & Glo LifeStyle Collection • T wilight-II-B • 2108-900 Rev . G • 8/07 2 Congratulations Listing Label Information/Location Model Name: ___________________________________________ Date p.
Heat & Glo LifeStyle Collection • T wilight-II-B • 2108-900 Rev . G • 8/07 3 Î = Contains updated information. T able of Contents 1 Listing and Code Approvals A. Appliance Certi fi cation . . . . . . . . . . . . . . . . . . . . . . . . . .
Heat & Glo LifeStyle Collection • T wilight-II-B • 2108-900 Rev . G • 8/07 4 B. Glass Speci fi cations Hearth & Home T echnologies appliances manufactured with tempered glass may be installed in hazardous locations such as bathtub enclosures as de fi ned by the Consumer Product Safety Commission (CPSC).
Heat & Glo LifeStyle Collection • T wilight-II-B • 2108-900 Rev . G • 8/07 5 I. Requirements for the Commonwealth of Massachusetts For all side wall horizontally vented gas fueled equipment .
Heat & Glo LifeStyle Collection • T wilight-II-B • 2108-900 Rev . G • 8/07 6 A. Design and Installation Considerations Heat & Glo direct vent gas appliances are designed to operate with all combustion air siphoned from outside of the building and all exhaust gases expelled to the outside.
Heat & Glo LifeStyle Collection • T wilight-II-B • 2108-900 Rev . G • 8/07 7 GLASS FLUSH TO EXTERIOR INSULATED ENVELOPE GLASS A B B D E C B GLASS FLUSH TO EXTERIOR INSULATED ENVELOPE GLASS NOTE: • Illustrations reflect typical installations and are FOR DESIGN PURPOSES ONL Y .
Heat & Glo LifeStyle Collection • T wilight-II-B • 2108-900 Rev . G • 8/07 8 H K G F J I B. Clearances Figure 3.3 Clearances to Combustibles Fire Risk. • Locate and install appliance to all clearance speci fi cations in manual. Fire Risk.
Heat & Glo LifeStyle Collection • T wilight-II-B • 2108-900 Rev . G • 8/07 9 C. Mantel Projections - Indoor only Figure 3.4 Indoor Clearances to Mantels or other Combustibles above Appliance Figure 3.5 Indoor clearances to Mantel Legs or W all Projections (Acceptable on both sides of opening.
Heat & Glo LifeStyle Collection • T wilight-II-B • 2108-900 Rev . G • 8/07 10 D E L FP A H M X J or K I A G F FP FP FP FP FP B B B 4 4 T er mination Locations FP = APPLIANCE OPENING X = AIR SUPPL Y INLET = AREA WHERE APPLIANCE IS NOT PERMITTED J = 9” (U.
Heat & Glo LifeStyle Collection • T wilight-II-B • 2108-900 Rev . G • 8/07 1 1 Fire Risk. • Prevent contact with sagging, loose insulation. • Do NOT install against vapor barriers or exposed insulation. B. Securing and Leveling the Appliance 5 5 Appliance Preparation Placing Metal Hearth Strip The metal hearth strip (approx.
Heat & Glo LifeStyle Collection • T wilight-II-B • 2108-900 Rev . G • 8/07 12 FIREPLACE FLANGE APPL Y HIGH TEMPERA TURE SILICONE SEALANT TO CORNER EDGES BEND IN FLANGE Figure 5.13 Proper Positioning, Leveling and Securing of a Appliance NOTE: Caulk behind all fl anges before securing to the exterior.
Heat & Glo LifeStyle Collection • T wilight-II-B • 2108-900 Rev . G • 8/07 13 APPLIANCE TL-TRIM KIT HOOD TOP HOOD TOP OF FIREPLACE 16-5/16 in. WA LL S TU D HOUSEWRAP INSULA TION HOUSEWRAP ** (BUILDING P APER) OVERLAP FLASHING 1 in. SHEA THING, COMBUSTIBLE FIREPLACE HEADER INSULA TED FRAMING ST ANDOFF NON-COMBUSTIBLE * SHEA THING 12 in.
Heat & Glo LifeStyle Collection • T wilight-II-B • 2108-900 Rev . G • 8/07 14 C. Installing Non-combustible Facing Material (Outdoor Side) • Attach the left and right side pieces to the framing mem- bers.
Heat & Glo LifeStyle Collection • T wilight-II-B • 2108-900 Rev . G • 8/07 15 NOTE: Have the gas supply line installed in accordance with local building codes, if any . If not, follow ANSI 223.1. Installation should be done by a quali fi ed installer approved and/or licensed as required by the locality .
Heat & Glo LifeStyle Collection • T wilight-II-B • 2108-900 Rev . G • 8/07 16 Fire hazard. Do NOT change the valve settings. • This valve has been preset at the factory . • Changing valve settings may result in fi re hazard or bodily injury .
Heat & Glo LifeStyle Collection • T wilight-II-B • 2108-900 Rev . G • 8/07 17 A. Recommendation for Wire This appliance requires 110-120 VAC be wired to the junction box for proper operation of the appliance.
Heat & Glo LifeStyle Collection • T wilight-II-B • 2108-900 Rev . G • 8/07 18 Figure 7.1 Fan Wiring Diagram C. Optional Accessories Optional fan and remote control kits require that 1 10-120 V AC be wired to the factory installed junction box before the appliance is permanently installed (see Figure 7.
Heat & Glo LifeStyle Collection • T wilight-II-B • 2108-900 Rev . G • 8/07 19 Figure 7.3 Intelli fi re Pilot Ignition (IPI) Wiring Diagram * NOTE: 1. Ignition module, valve, pilot, and wall switch operate on 3 volts. Uninterrupted 120 V AC is required at junction box unless equipped with battery back-up.
Heat & Glo LifeStyle Collection • T wilight-II-B • 2108-900 Rev . G • 8/07 20 6 INCH APPROX. WIRE LEAD 1 MALE END 1 FEMALE END TEMPERATURE SENSOR SWITCH WIRE LEAD 2 FEMALE ENDS JUNCTION BOX 6 INCH APPROX.
Heat & Glo LifeStyle Collection • T wilight-II-B • 2108-900 Rev . G • 8/07 21 12 11 10 9 8 7 6 13-5/8 12-5/8 11-5/8 10-5/8 9-5/8 8-5/8 7-5/8 HOOD NON-COMBUSTIBLE BOARD (SUPPLIED ON APPLIANCE) INDOOR SIDE ONLY CEILING 35-3/4 A. Mantel Projections Figure 8.
Heat & Glo LifeStyle Collection • T wilight-II-B • 2108-900 Rev . G • 8/07 22 Figure 8.5 Exterior View Fire Risk. Finish all edges and fronts to clearances and speci fi cations listed in manual. • Black metal columns may be covered with non-combustible material only .
Heat & Glo LifeStyle Collection • T wilight-II-B • 2108-900 Rev . G • 8/07 23 Figure 8.7 Exterior View with Non-combustible Facing Material APPLIANCE HOOD TOP OF APPLIANCE SOFFIT SIDING HOUSEWRAP (BUILDING P APER) AND SHEA THING 35-5/16 in. MINIMUM CLEARANCE TO NON-VINYL 64-5/16 in.
Heat & Glo LifeStyle Collection • T wilight-II-B • 2108-900 Rev . G • 8/07 24 9 9 Appliance Setup A. Remove Shipping Materials Remove shipping materials from inside or underneath the fi rebox. B. Clean the Appliance Clean/vacuum any sawdust that may have accumulated inside the fi rebox or underneath in the control cavity .
Heat & Glo LifeStyle Collection • T wilight-II-B • 2108-900 Rev . G • 8/07 25 E. Positioning the Logs Log Set Assembly: LOGS-TWI 1 2 CAUTION: Logs are fragile! Carefully remove the logs from the packaging. Remove the metal supports which held the log box in place during shipping.
Heat & Glo LifeStyle Collection • T wilight-II-B • 2108-900 Rev . G • 8/07 26 STEP 4. LOG #3 (SRV2005-702): Position log #3 as shown by leaning it against log # 2 and resting the other end on the peak of the burner . Do not cover any port holes.
Heat & Glo LifeStyle Collection • T wilight-II-B • 2108-900 Rev . G • 8/07 27 STEP 8. LOG #7 (SR V703-703): Place log #7 on the grate tine between log #2 and log #5. Rest one end on the burner making sure not to cover any port holes. STEP 7.
Heat & Glo LifeStyle Collection • T wilight-II-B • 2108-900 Rev . G • 8/07 28 A. Before Lighting Appliance This appliance has an Intelli fi re ignition system. 1 0 10 Op erating Instr uctions CAUTION If installing Intelli fi re ignition battery backup: • Do not install batteries if the backup mode may not be used for extended time.
Heat & Glo LifeStyle Collection • T wilight-II-B • 2108-900 Rev . G • 8/07 29 B. Lighting Appliance Intelli fi re Ignition Final Inspection by ________________________________ 1. T urn off all electric power to the appli- ance. 2. This appliance is equipped with an igni- tion device which automatically lights the burner .
Heat & Glo LifeStyle Collection • T wilight-II-B • 2108-900 Rev . G • 8/07 30 C. After Appliance is Lit Initial Break-in Procedure When you light the appliance, you may notice that it pro- duces heat which does have an associated odor or smell.
Heat & Glo LifeStyle Collection • T wilight-II-B • 2108-900 Rev . G • 8/07 31 1 1 11 T roubleshooting With proper installation, operation, and maintenance your gas appliance will provide years of trouble-free service.
Heat & Glo LifeStyle Collection • T wilight-II-B • 2108-900 Rev . G • 8/07 32 Intelli fi re Ignition System - (continued) Symptom Possible Cause Corrective Action 3. Continued d. Damaged pilot as- sembly or dirty sensor rod. V erify that ceramic insulator around the sensor rod is not cracked, damaged, or loose.
Heat & Glo LifeStyle Collection • T wilight-II-B • 2108-900 Rev . G • 8/07 33 A. Maintenance T asks Although the frequency of appliance servicing and maintenance will depend on use and the type of installation, a quali fi ed service technician should perform an appliance check-up at the beginning of each heating season.
Heat & Glo LifeStyle Collection • T wilight-II-B • 2108-900 Rev . G • 8/07 34 Inspect Maintenance T asks Doors, Surrounds and Fronts 1. Assess condition of screen and replace as necessary . Recommend addition of screen if one is not present.
Heat & Glo LifeStyle Collection • T wilight-II-B • 2108-900 Rev . G • 8/07 35 A B C D C F G H I J K L M N O P Q R E INDOOR VIEW ELECTRICAL ACCESS GAS LINE ACCESS OUTDOOR VIEW Location Inches.
Heat & Glo LifeStyle Collection • T wilight-II-B • 2108-900 Rev . G • 8/07 36 Service Parts Diagram B. Service Parts T wilight-II-B Beginning Manufacturing Date: 1-06 Ending Manufacturing Date: ______ 8 9 10 11 12 13 14 15 16 17 Flashing Header (Component of T rim Kit) 1 2 3 4 5 6 7 Log Set Assembly Part number list on following page.
Heat & Glo LifeStyle Collection • T wilight-II-B • 2108-900 Rev . G • 8/07 37 IMPORT ANT : THIS IS DA TED INFORMA TION. The most current information is located on your dealers’ VIP site. When ordering, supply serial and model numbers to ensure correct service parts.
Heat & Glo LifeStyle Collection • T wilight-II-B • 2108-900 Rev . G • 8/07 38 Service Parts V alve Assembly Parts List T wilight-II-B Beginning Manufacturing Date: 1-06 Ending Manufacturing Date: ______ 1 2 3 4 5 6 7 8 9 10 1 1 12 13 14 15 IMPORT ANT : THIS IS DA TED INFORMA TION.
Heat & Glo LifeStyle Collection • T wilight-II-B • 2108-900 Rev . G • 8/07 39 © 2005 Hearth & Home T echnologies Inc. C. Limited Lifetime W arranty LIMITED LIFETIME W ARRANTY HEA T & GLO GAS APPLIANCE PRODUCTS BASIC ONE-YEAR W ARRANTY .
Heat & Glo LifeStyle Collection • T wilight-II-B • 2108-900 Rev . G • 8/07 40 Heat & Glo LifeStyle Collection, a brand of Hearth & Home T echnologies Inc.
An important point after buying a device Hearth and Home Technologies II-B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hearth and Home Technologies II-B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hearth and Home Technologies II-B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hearth and Home Technologies II-B you will learn all the available features of the product, as well as information on its operation. The information that you get Hearth and Home Technologies II-B will certainly help you make a decision on the purchase.
If you already are a holder of Hearth and Home Technologies II-B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hearth and Home Technologies II-B.
However, one of the most important roles played by the user manual is to help in solving problems with Hearth and Home Technologies II-B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hearth and Home Technologies II-B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
