Instruction/ maintenance manual of the product 7631 Health O Meter
Go to page of 28
IMPORT ANT NOTES Y our Measure for Good Health™ UPPER ARM Blood Pressure Monitor with ComfortRead™ T echnology Please read this entire manual carefully before using this device.
2 2 Upper Arm Blood Pressure Monitor with ComfortRead™ T echnology IMPOR T ANT SAFETY INSTRUCTIONS DO NOT DESTRO Y Features: • Fully-Automatic • One-T ouch Operation • Extra Large, Easy-T o-Re.
3 T able of Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4 Product Component Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Comfort Read™ Measuring T echnology .
4 6 4 Blood pressure measurements determined with the Health o meter ® blood pressure monitor are equivalent to those using the cuff/stethoscope auscultation method and are within the limits prescribed by the American National Standards Institute (ANSI).
5 Standards of Quality This Blood Pressure Monitor conforms with the American National Standards Institute/American Association of Medical Instrumentation Standards for Non-Invasive Blood Pressure Monitors. In addition, the device complies with the European regulations and bears the CE mark “CE 0366”.
6 6 Blood Pressure Standard The W orld Health Organization (WHO) has developed a blood pressure standard, according to which areas of low and high-risk blood pressure are identified. This standard, however , is a general guideline as individual blood pressure varies among different people and different age groups, etc.
7 7 Display Explanations Display: Systolic Pressure Diastolic Pressure Pulse Rate No. of Memory Sequence Icons: Appears when measurement value is stored in memory or is recalled from memory Appears when batteries should be replaced Shows the Pulse Rate per minute Occurs when an error was made during measurement Installing Batteries 1.
14 8 8 Y ou need to replace the batteries when: 1. The “low battery” icon appears on the display . 2. The “POWER” button is pushed and nothing appears on the display Note: Discard used Alkaline batteries as directed by your local environmental codes.
9 9 Applying the Arm Cuff 1. Plug the cuff connector tube (A) into the unit. 2. Unwrap the arm cuff, leaving the “Index” end of the cuff through the metal D-ring (B) of the cuff.
18 10 10 5. If the Index line falls within the OK range, indicated at the edge of the cuff, this cuff is suitable for your use. If the Index line falls outside of the OK range, you may need a larger cuff for accurate measurement. Please consult your local retailer for the purchase of a larger cuff or visit the Health o meter ® website at www .
11 11 3. When cuff pressure reaches your approximate systolic blood pressure, measurement will be complete and will be followed by the release of cuff pressure. When the monitor completes the measurement, it will automatically display and store the systolic, diastolic and pulse reading into memory .
22 12 12 Note: 1. The data in the memory will not be lost even when the Blood Pressure Monitor is switched off. 2. Y ou can erase the memories stored by removing the batteries. T roubleshooting If a problem should arise during use, please check the following points.
13 13 4. T o avoid hazardous situations, the unit should not be operated by children. 5. If the unit is stored near a freezing temperature, allow it to reach room temperature before use. 6. Y our Health o meter ® Blood Pressure Monitor is not field serviceable.
14 14 Warranty Information Y our Health o meter ® Blood Pressure Monitor is covered under the limited Warranty offered by Sunbeam Products, Inc. (“Sunbeam”). Sunbeam warrants that for a period of five years from the date of purchase, this product will be free from defects in material and workmanship.
IMPORT ANT NOTES Y our Measure for Good Health™ UPPER ARM Blood Pressure Monitor with ComfortRead™ T echnology.
2 2 Upper Arm Blood Pressure Monitor with ComfortRead™ T echnology IMPOR T ANT SAFETY INSTRUCTIONS DO NOT DESTRO Y Features: • Fully-Automatic • One-T ouch Operation • Extra Large, Easy-T o-Re.
3 T able of Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4 Product Component Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Comfort Read™ Measuring T echnology .
4 6 4 Blood pressure measurements determined with the Health o meter ® blood pressure monitor are equivalent to those using the cuff/stethoscope auscultation method and are within the limits prescribed by the American National Standards Institute (ANSI).
5 Standards of Quality This Blood Pressure Monitor conforms with the American National Standards Institute/American Association of Medical Instrumentation Standards for Non-Invasive Blood Pressure Monitors. In addition, the device complies with the European regulations and bears the CE mark “CE 0366”.
6 6 Blood Pressure Standard The W orld Health Organization (WHO) has developed a blood pressure standard, according to which areas of low and high-risk blood pressure are identified. This standard, however , is a general guideline as individual blood pressure varies among different people and different age groups, etc.
7 7 Display Explanations Display: Systolic Pressure Diastolic Pressure Pulse Rate No. of Memory Sequence Icons: Appears when measurement value is stored in memory or is recalled from memory Appears when batteries should be replaced Shows the Pulse Rate per minute Occurs when an error was made during measurement Installing Batteries 1.
14 8 8 Y ou need to replace the batteries when: 1. The “low battery” icon appears on the display . 2. The “POWER” button is pushed and nothing appears on the display Note: Discard used Alkaline batteries as directed by your local environmental codes.
9 9 Applying the Arm Cuff 1. Plug the cuff connector tube (A) into the unit. 2. Unwrap the arm cuff, leaving the “Index” end of the cuff through the metal D-ring (B) of the cuff.
18 10 10 5. If the Index line falls within the OK range, indicated at the edge of the cuff, this cuff is suitable for your use. If the Index line falls outside of the OK range, you may need a larger cuff for accurate measurement. Please consult your local retailer for the purchase of a larger cuff or visit the Health o meter ® website at www .
11 11 3. When cuff pressure reaches your approximate systolic blood pressure, measurement will be complete and will be followed by the release of cuff pressure. When the monitor completes the measurement, it will automatically display and store the systolic, diastolic and pulse reading into memory .
22 12 12 Note: 1. The data in the memory will not be lost even when the Blood Pressure Monitor is switched off. 2. Y ou can erase the memories stored by removing the batteries. T roubleshooting If a problem should arise during use, please check the following points.
13 13 4. T o avoid hazardous situations, the unit should not be operated by children. 5. If the unit is stored near a freezing temperature, allow it to reach room temperature before use. 6. Y our Health o meter ® Blood Pressure Monitor is not field serviceable.
14 14 Warranty Information Y our Health o meter ® Blood Pressure Monitor is covered under the limited Warranty offered by Sunbeam Products, Inc. (“Sunbeam”). Sunbeam warrants that for a period of five years from the date of purchase, this product will be free from defects in material and workmanship.
An important point after buying a device Health O Meter 7631 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Health O Meter 7631 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Health O Meter 7631 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Health O Meter 7631 you will learn all the available features of the product, as well as information on its operation. The information that you get Health O Meter 7631 will certainly help you make a decision on the purchase.
If you already are a holder of Health O Meter 7631, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Health O Meter 7631.
However, one of the most important roles played by the user manual is to help in solving problems with Health O Meter 7631. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Health O Meter 7631 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
