Instruction/ maintenance manual of the product 7630 Health O Meter
Go to page of 32
IMPORT ANT NOTES Y our Measure for Good Health™ UPPER ARM Blood Pressure Monitor.
2 2 IMPORT ANT SAFETY INSTRUCTIONS Upper Arm Blood Pressure Monitor DO NOT DESTROY Features: • Semi-Automatic • Large, Easy-T o-Read Digital Display • 60 Automatic Memory Feature • Convenient .
3 T able of Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4 Product Component Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Standards of Quality .
4 6 4 Blood pressure measurements determined with the Health o meter ® blood pressure monitor are equivalent to those using the cuff/stethoscope auscultation method and are within the limits prescribed by the American National Standards Institute (ANSI).
5 Standards of Quality This Blood Pressure Monitor conforms with the American National Standards Institute/American Association of Medical Instrumentation Standards for Non-Invasive Blood Pressure Monitors. In addition, the device complies with the European regulations and bears the CE mark “CE 0366”.
6 6 Blood Pressure Standard The W orld Health Organization (WHO) has developed a blood pressure standard, according to which areas of low and high-risk blood pressure are identified. This standard, however , is a general guideline as individual blood pressure varies among different people and different age groups, etc.
7 7 Display Explanations Display: Systolic Pressure Diastolic Pressure Pulse Rate No. of Memory Sequence Icons: Appears when manual cuff inflation is needed Appears when manual cuff deflation is needed Appears when batteries should be replaced Shows the Pulse Rate per minute Occurs when a mistake wasmade during measurement Installing Batteries 1.
14 8 8 Y ou need to replace the batteries when: 1. The “low battery” icon appears on the display . 2. The “ POWER ” button is pushed and nothing appears on the display . Note: Discard used Alkaline batteries as directed by your local environmental codes.
9 9 Applying the Arm Cuff 1. Plug the cuff connector tube (A) into the unit. 2. Unwrap the arm cuff, leaving the “Index” end of the cuff through the metal D-ring (B) of the cuff.
10 10 5. If the Index line falls within the “OK” range, indicated at the edge of the cuff, this cuff is suitable for your use. If the Index line falls outside of the “OK” range, you may need a larger cuff for accurate measurement.
2. Squeeze the bulb to increase pressure in the arm cuff. The display will show the pressure reading within the cuff. Continue pumping until the pressure reaches approximately 50~60 mmHg above your normal systolic pressure.
22 12 12 Recalling Memory 1. T o recall stored blood pressure readings from the memory, simply press the MEMORY button. The last set of readings recorded in memory will be displayed. 2. Another press of the MEMORY button will recall the previous set of readings.
Síntoma Ninguna exhibición de pantalla cuando se presiona POWER La pantalla muestra la señal EE o el valor de presión arterial mostrado es demasiado bajo (o alto) Punto a V erificar ¿Están agota.
14 14 Precautionary Notes: 1. Y our Health o meter ® monitor contains high-precision components. Therefore, avoid extreme temperatures, humidity , and direct sunlight. Avoid dropping or sharp impacts to the main unit, and protect it from dust. 2. Clean the blood pressure monitor body and the cuff carefully with a slightly dampened soft cloth.
15 15 Especificaciones: Método de Medición : Oscilométrico Rango de Medición : Presión 20 ~ 280mmHg; Pulso: 40 – 180 latidos/minuto Sensor de Presión : Semi conductor Precisión : Presión ± .
16 16 Warranty Information Y our Health o meter ® Blood Pressure Monitor is covered under the limited Warranty offered by Sunbeam Products, Inc. (“Sunbeam”). Sunbeam warrants that for a period of five years from the date of purchase, this product will be free from defects in material and workmanship.
IMPORT ANT NOTES Y our Measure for Good Health™ UPPER ARM Blood Pressure Monitor Please read this entire manual carefully before using this device. Model 7630 NOT AS IMPORT ANTES Y our Measure for G.
2 2 IMPORT ANT SAFETY INSTRUCTIONS Upper Arm Blood Pressure Monitor DO NOT DESTROY Features: • Semi-Automatic • Large, Easy-T o-Read Digital Display • 60 Automatic Memory Feature • Convenient .
3 T able of Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4 Product Component Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Standards of Quality .
4 6 4 Blood pressure measurements determined with the Health o meter ® blood pressure monitor are equivalent to those using the cuff/stethoscope auscultation method and are within the limits prescribed by the American National Standards Institute (ANSI).
5 Standards of Quality This Blood Pressure Monitor conforms with the American National Standards Institute/American Association of Medical Instrumentation Standards for Non-Invasive Blood Pressure Monitors. In addition, the device complies with the European regulations and bears the CE mark “CE 0366”.
6 6 Blood Pressure Standard The W orld Health Organization (WHO) has developed a blood pressure standard, according to which areas of low and high-risk blood pressure are identified. This standard, however , is a general guideline as individual blood pressure varies among different people and different age groups, etc.
7 7 Display Explanations Display: Systolic Pressure Diastolic Pressure Pulse Rate No. of Memory Sequence Icons: Appears when manual cuff inflation is needed Appears when manual cuff deflation is needed Appears when batteries should be replaced Shows the Pulse Rate per minute Occurs when a mistake wasmade during measurement Installing Batteries 1.
14 8 8 Y ou need to replace the batteries when: 1. The “low battery” icon appears on the display . 2. The “ POWER ” button is pushed and nothing appears on the display . Note: Discard used Alkaline batteries as directed by your local environmental codes.
9 9 Applying the Arm Cuff 1. Plug the cuff connector tube (A) into the unit. 2. Unwrap the arm cuff, leaving the “Index” end of the cuff through the metal D-ring (B) of the cuff.
10 10 5. If the Index line falls within the “OK” range, indicated at the edge of the cuff, this cuff is suitable for your use. If the Index line falls outside of the “OK” range, you may need a larger cuff for accurate measurement.
2. Squeeze the bulb to increase pressure in the arm cuff. The display will show the pressure reading within the cuff. Continue pumping until the pressure reaches approximately 50~60 mmHg above your normal systolic pressure.
22 12 12 Recalling Memory 1. T o recall stored blood pressure readings from the memory, simply press the MEMORY button. The last set of readings recorded in memory will be displayed. 2. Another press of the MEMORY button will recall the previous set of readings.
Síntoma Ninguna exhibición de pantalla cuando se presiona POWER La pantalla muestra la señal EE o el valor de presión arterial mostrado es demasiado bajo (o alto) Punto a V erificar ¿Están agota.
14 14 Precautionary Notes: 1. Y our Health o meter ® monitor contains high-precision components. Therefore, avoid extreme temperatures, humidity , and direct sunlight. Avoid dropping or sharp impacts to the main unit, and protect it from dust. 2. Clean the blood pressure monitor body and the cuff carefully with a slightly dampened soft cloth.
15 15 Especificaciones: Método de Medición : Oscilométrico Rango de Medición : Presión 20 ~ 280mmHg; Pulso: 40 – 180 latidos/minuto Sensor de Presión : Semi conductor Precisión : Presión ± .
16 16 Warranty Information Y our Health o meter ® Blood Pressure Monitor is covered under the limited Warranty offered by Sunbeam Products, Inc. (“Sunbeam”). Sunbeam warrants that for a period of five years from the date of purchase, this product will be free from defects in material and workmanship.
An important point after buying a device Health O Meter 7630 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Health O Meter 7630 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Health O Meter 7630 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Health O Meter 7630 you will learn all the available features of the product, as well as information on its operation. The information that you get Health O Meter 7630 will certainly help you make a decision on the purchase.
If you already are a holder of Health O Meter 7630, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Health O Meter 7630.
However, one of the most important roles played by the user manual is to help in solving problems with Health O Meter 7630. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Health O Meter 7630 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
