Instruction/ maintenance manual of the product RANGER 53 PRO 396E Hayter
Go to page of 40
Ranger 53 Pro CODE 396E OWNER'S HANDBOOK (English V ersion) CODE SERIAL NO. HANDBOOK: 1 1 1-1071 (Rev .A.) 396E 270000001 Issue : 12.12.06.
Main Features 1.2 MAIN FEA TURES /SPECIFICA TIONS 1 2 3 4 5 6 7 9 10 11 12 13 14 15 16 17 18 8 1. Spark Plug Lead. 2. Primer Bulb. 3. Engine Cover . 4. Air Filter . 5. Fuel Filler Cap. 6. Oil Filler Cap & Dipstick. 7. Height of Cut Lever . 8. Serial No.
1ST Y ear (12 months) W e certify that this service has been carried out by an Authorised Hayter Service Dealer Date: 1ST Y ear (12 months) Owner’s Name: Serial Number: Date: 2nd Y ear (24 months) W.
.
1.5 1.20 - 1.21 Lawn Car e Calendar - Guide only 1.22 Maintenance Schedule 1.23 - 1.29 Mower Maintenance 1.23 - Engine 1.23 - Thr ottle Cable Adjustment 1.23 - Carbur ettor Adjustments 1.24 - Oil Service 1.24 - Air Cleaner Service 1.25 - Spark Plug Service 1.
Thank you for purchasing a Hayter mower . The following pages are designed to help you gain safe and efficient service from your machine. IMPOR T ANT : This ‘Owners Handbook’ should be regarded as part of the mower as it gives essential information regarding mower safety , operation, maintenance and specifications.
LIMITED W ARRANTY Hayter Limited warrants to the original user/purchaser that this unit shall be free from defects in material and workmanship under normal use and service for a period of one year from the date of purchase.
1.8 SAFETY PRECAUTIONS This safety alert symbol indicates important safety messages. When you see this symbol be alert to the possibility of injury . Carefully r ead the following and inform others. Y our mower is perfectly safe if used correctly . Failure to observe the following precautions may r esult in serious injury .
1.9 PRECAUTIONS SAFETY - Always use fresh fuel. Stale fuel can block the carburettor and cause leakage. - Replace fuel tank and oil tank caps securely . - Replace faulty exhaust. A damaged cutterblade or loose fixing bolt are major hazards. Before use, always visually inspect the cutting mechanism to ensure that it is in good condition.
1.10 Do not tilt the mower when starting the engine. Do not put hands or feet near or under rotating parts. Never pick up or carry the mower while the engine is running. Never lift the rear deflector while the engine is running. Never touch the exhaust/exhaust guard or cooling fins when the engine is hot.
1.11 SAFETY PRECAUTIONS Allow the engine to cool before storing in any enclosure. T o reduce the fire hazard, keep the engine and the surrounding deck area free of grass, leaves, or excessive grease. Check the rear deflector and grassbag frequently for wear or deterioration.
1.12 ASSEMBLING THE MOWER Remove the mower from the packaging and check that the following items have been supplied correctly . If any items are missing contact, your local Hayter dealer . T o pr event accidents cut off the long ribbon attached to the grass- bag and discard.
1.13 Grassbag Assembly Assemble the grassbag: Insert metal frame into grassbag fabric and clip into position. Push grassbag flap onto frame to fix in position. W ARNING - PREVENT ACCIDENTS: Always ensure grassbag flap is securely fitted and in good condition.
T o pr event engine damage the engine is shipped without oil or petrol. The engine must be filled with the correct grade of oil and petrol befor e starting the engine. Always use high quality detergent oil classified SAE 30 oil. Never use additives with recommended oil.
Operate all control levers several times and ensure that the cables move freely . Check that the engine stop and ground drive clutch levers return freely to their rest position when released. Whilst operating the engine throttle mechanism slight resistance should be felt when moving the lever to the ‘ choke ’ position.
Hold the handlebar and operate the ground drive clutch lever to power the mower in a forward direction. When the ground drive clutch lever is disengaged the mower may be pushed. This feature is useful when mowing in confined areas. Ground speed may be adjusted by operating the speed variator control.
1.17 MOWER THE OPERA TING T o make a wide turn steer the mower with the handlebar in the direc- tion required. T o make a tight turn release the ground drive clutch lever , apply down- ward pressure on the handlebar to raise the front wheels just above ground level and steer in the required direction.
T o pr event engine damage do not use the mower on slopes gr eater than 20 degrees. Move the height of cut lever sideways to disengage it from the locking notch, then push forwards to lower or pull backwards to raise the height of cut. Release the lever in the required position and ensure that it locks firmly into one of the seven notch settings.
1.19 Remove the grassbag and operate the mower with the rear deflector in the closed position. Areas of heavy growth should be mown without collecting the clip- pings. If collection is required, first mow the area without the grass- bag at the maximum height of cut setting.
1.20 There is very little work to do this month apart from brushing away leaves. Keep off the grass if frozen or waterlogged. Rake the grass thoroughly . Spike the lawn to aerate and stimulate soil organisms and root growth and apply lawn sand if necessary .
1.21 Keep mowing regularly and watering as necessary . Fill any cracks caused by drought with a mixture of sharp sand and soil. In dry weath- er conditions leave the grass longer to help retain ground moisture. Raise the height of cut to allow the grass to thicken and protect the roots from the winter frost and snow .
1.22 T o pr event accidents stop the engine and disconnect the spark plug lead before attempting to carry out maintenance pr ocedures on the mower . After the very first hour check clutch adjustment. After the very first five hours change the engine oil.
Clean the engine cooling system. Clean more often under dusty conditions or when airborne debris is present or after prolonged operation whilst cutting tall, dry grass. Replace the spark plug. 1. Air Cleaner 2. Spark Plug / Lead 3. Carburetor 4. Exhaust Guard 5.
1.24 Check the oil level daily before starting the engine and ensure that the correct oil level is maintained. Refer to-‘Before Starting the Mower ’ for oil checking and filling instructions. Change the engine oil after the first 5 hours of operation and thereafter according to the ‘Maintenance Schedule’:- 1.
1.25 Use only Briggs & Stratton spark tester (1) to check for a spark as shown in the diagram. Replace the spark plug every 100 hours or every season, whichever occurs first. A spark plug wrench is available from any authorised Briggs & Stratton service dealer .
1.26 Remove grass debris from the top and underside of the deck housing immediately after use. Fertilisers and top dressings ar e particularly corrosive. Thoroughly clean the mower deck immediately after use on treat- ed grass and store well away fr om corrosive materials.
1.27 Lubricate the wheels, pivot points and linkages with engine oil every 25 operating hours. Apply a good quality medium grease to the inner control cables at the point of entry and exit from their outer casing. Drain the fuel by running the engine until the fuel tank is empty and the engine stops.
1.28 Assemble the cutterblade with the turned up edges facing towards the engine. Secure the cutterblade using the bolt (1), spring washer (2), location spacer (3), large washer (4) and tighten to a torque of 40Nm. A slightly worn cutterblade may be re-sharpened.
1.29 T o store the handlebar unscrew the securing knobs sufficiently to allow it to be pivoted forwards to rest against the mower . T ake care to ensure that the control cables do not become snagged at the pivot point and depress the engine stop lever to prevent it being damaged through contact with the engine spark plug.
PROBLEM POSSIBLE F AUL T REMEDY Engine will not turn over Engine stop lever released. Operate engine stop lever . Incorrect oil level. Check oil level. Obstruction under deck. Remove obstruction. Engine smokes Excess oil level. Check oil level. Air cleaner cartridge oil Service air cleaner .
PROBLEM POSSIBLE F AUL T REMEDY Engine vibrates excessively Mounting bolts loose. T ighten bolts Cutterblade bolt loose. T ighten bolt Cutterblade out of balance.
1.32 CONFORMITY OF DECLARA TION EC DECLARATI ON OF CON FORMITY Ma nufac ture r: SA N DRI G A RD EN Address : via Manzoni 22 36027 R os a, It alia . declare that the lawnmow er : Model name: Type: Mode.
1 Belt - Variable Pulley to Gearbox SA284930 1 2 Belt - Engine Crankshaft to Variable Pulley SA284920 1 3 Pulley - Variable SA362860 1 4 Washer - Plain SA2014040 2 5 Bracket - Pivot SA380200 1 6 Space.
41 Axle - Front SA3037790 1 42 Bush - Axle SA480180 2 43 Washer - Plain SA144370 1 44 Wheel - Rear SA385160 2 45 Decal - Hayter 410087 1 46 Bush SA2037910 2 47 Knob - Large SA2008490 4 48 Cap SA340060 4 49 Nut SA194020 4 50 Handlebar - Lower R.
81 Gear SA242210 1 82 Washer - Plastic SA403540 2 83 Nut SA144450 2 84 Axle - Rear SA3037810 1 85 Plate - Clamp SA280550 2 86 Cap Screw - Soc Hd. C'Sunk SA193610 2 87 Damper - Rear Deflector SA40.
121 Deflector - Rear (includes items 11 & 17) SA380830 1 122 Setscrew SA142760 2 123 Washer SA147740 2 124 Guide - Cable SA446340 3 125 Plug SA251950 2 126 Decal - Throttle SA647880 1 127 Decal SA.
11 6 11 7 37 149 1D396E01A 9 4 3 1 24 128 25 2 4 26 11 6 130 27 70 63 136 136 135 68 68 33 49 72 63 14 60 62 15 13 49 58 62 59 57 51 64 35 65 16 50 125 54 87 11 17 89 122 121 122 47 47 48 48 55 143 12.
1.38 Notes: NOTES.
1.39 NOTES Notes:.
1.40 CUST OMER INFORMA TION Serial No: Engine T ype: 121602-0315-E1 Engine:- Briggs & Stratton Intek Edge 60 Date of Sale:- Y our Local Dealer:-.
An important point after buying a device Hayter RANGER 53 PRO 396E (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hayter RANGER 53 PRO 396E yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hayter RANGER 53 PRO 396E - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hayter RANGER 53 PRO 396E you will learn all the available features of the product, as well as information on its operation. The information that you get Hayter RANGER 53 PRO 396E will certainly help you make a decision on the purchase.
If you already are a holder of Hayter RANGER 53 PRO 396E, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hayter RANGER 53 PRO 396E.
However, one of the most important roles played by the user manual is to help in solving problems with Hayter RANGER 53 PRO 396E. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hayter RANGER 53 PRO 396E along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
