Instruction/ maintenance manual of the product DIVA T/A ISDN Hayes Microcomputer Products
Go to page of 122
DIVA T/A ISDN Modem User’s Guide.
Fourth Edition (July 1998) 206-152-04 DIVA T /A IS DN M odem is a t rademar k of E i con Technol ogy Cor por ati on. Mi crosof t, Wi ndows, and Wi ndows N T are r egi st er ed tr adem ar ks of M icr os of t C or porat i on. CompuS er ve i s a r egi st er ed t rademar k of CompuS er ve Incorpor ated.
Tab le of Cont ents In tr o du ctio n .......................................................................................... 5 Wh at Yo u Need .................................................................................... 7 Using E Z -ISDN or ISDN O r de r i ng Code ( IO C) t o order y ou r ISDN Lin e .
Ap p end ix B : Tro ub les h o o tin g t he D I VA T/ A .................................. 106 L ED S tatu s I ndic ato rs o n th e DI VA T/A ........................................ 10 6 IS DN L ED s ..................................................
DIV A T /A ISDN M ode m User’s G u ide 5 Introduction DIV A T /A is an exte rn al I SDN mod em a va ilable in S/T a nd U in terface vers io ns. It p rovi des easy an d afford abl e hig h-s peed B asi c Rat e Interface (B R I) ISDN c onnec tion to t he Inte rnet or to your of fice LAN.
DIV A T /A ISDN M ode m User’s G u ide 6 Note: The DIVA T/A can wor k independe ntly from your PC. If the DIVA T/A is turne d on, your ana log devices c an use your ISDN line rega rdless of w hether the DIVA T/A is connec ted to your PC. Ease of Use You ca n connec t the DIVA T/A to any computer ( PC or notebook) equipped with a se rial por t.
DIV A T /A ISDN M ode m User’s G u ide 7 What Y ou Need To install the DIVA T/A, you ne ed the following: Item Des cr iption DIVA T/ A Package • DIVA T/ A I S DN M o d e m • DIVA T/ A s o f t wa.
DIV A T /A ISDN M ode m User’s G u ide 8 Using EZ- ISDN or ISDN Or der ing Code ( IOC) to order y our ISDN Line (North Ameri ca on ly ) We highly re commend that you use our toll free ISDN orde ring serv ice to make sure you ge t the c orr ec t ISDN line the f irst time.
DIV A T /A ISDN M ode m User’s G u ide 9 Connecting the Cables To connec t the ca bles to your DIVA T/A: 1 Turn off your computer before you conne ct the ca bles. 2 Co nnect th e RJ 45 end o f th e ISD N cabl e (see ➀ i n Figure 1 on page 11) to the jack labe led ISDN on the r ear of the DI VA T/A.
DIV A T /A ISDN M ode m User’s G u ide 1 0 Figure 1: Connecti ng the Cables ➀ ISDN ca b l e ➃ S erial cable ➁ Analog device #1 ➄ A /C adapter ➂ Analog device #2 ⑥ Phone Adapter Note: Phone ports and adapte rs ar e only available on cer tain models.
DIV A T /A ISDN M ode m User’s G u ide 1 1 "D" LED not glowing steadily (International Firmware) If the “ D” LED is not glowing st ea dily, your ISDN ca bles may be im prop erly conn ected , t he IS DN l in e is not acti vat ed, or m ay in di cate an id le c onditio n.
DIV A T /A ISDN M ode m User’s G u ide 1 2 You may not have to enter SPID information for the DIVA T/A to function proper ly if your ISDN line is conf igured for non- initializ ing mode.
DIV A T /A ISDN M ode m User’s G u ide 1 3 Windows 95 Note : This instal l procedure is for the original release and Se rvic e Pack 1 ( SP1) ve rsion of Windows 95. If you are using Windows 95 Servic e Rele ase 2 (O SR2), go to “Windows 95 (OSR2)” on page 15.
DIV A T /A ISDN M ode m User’s G u ide 1 4 4 In the In stall From Disk window, enter the drive letter of your CD drive (or use the Brow se button to locate your CD drive) a nd clic k OK . 5 Go to page 25 a nd continue a t the section “I nstalling the DIVA T/A S oftware.
DIV A T /A ISDN M ode m User’s G u ide 1 5 Windows 95 (OSR2) Note : This inst all procedure is for Windows 95 Service Release 2 (OSR2). I f you are using original release or Servic e Pac k 1 (SP1) version of Windows 95, go to “Windows 95” on page 13.
DIV A T /A ISDN M ode m User’s G u ide 1 6 5 Enter the dr ive letter of your CD drive ( or use the Browse button to locate your CD dr ive) a nd click OK. 6 In the upda te Devic e Drive r Window, c lick Finish. 7 Go to page 25 a nd continue a t the section “I nstalling the DIVA T/A S oftware.
DIV A T /A ISDN M ode m User’s G u ide 1 7 Windows 98 WARNING ! It is ve ry importa nt to f ollow the ste ps, e xa ctly a s desc ribe d be low, to insta ll the D IVA T/A so ftwa re .
DIV A T /A ISDN M ode m User’s G u ide 1 8 4 Select the Sea rch f or the be st driver f or your de vice option and click Ne xt. 5 Sel ect “CD-R OM dri ve” and cli ck Nex t.
DIV A T /A ISDN M ode m User’s G u ide 1 9 7 Click Fini sh and go to page 25 and continue a t the sec tion “Instal lin g the DIVA T/ A Soft ware.”.
DIV A T /A ISDN M ode m User’s G u ide 2 0 Windows NT 4.0 Note: Before you be gin install ing the DIVA T/A, we suggest that the Remote Ac ce ss Servic e (RAS) , also known as Dial-Up Networking, be installe d with at le ast one mo dem (an y m ode m will do; it is only neede d to install t he DI VA T/A and can later be remov ed).
DIV A T /A ISDN M ode m User’s G u ide 2 1 4 Sele ct D on’t d ete ct my mo dem; I will se lec t it fr om a list, the n click Ne xt. Important: Make sure that you sele ct the choic e above and do not let Windows NT choose its own modem driver.
DIV A T /A ISDN M ode m User’s G u ide 2 2 6 Select t he Eicon DIVA T/ A ISDN M odem, t hen click Next . 7 Sel ect the ap pro pri ate C OM P ort th e DIVA T /A i s co nnect ed to. Clic k Ne xt, the n c lick f inish. 8 Close the Modem Proper ties window.
DIV A T /A ISDN M ode m User’s G u ide 2 3 Windows NT 3.51 If you a re going to use the DIVA T/A w ith RAS, R AS must already be in stalle d with a t le ast on e mod em ( any mode m will do, it is only nee de d to insta ll the DIV A T /A an d will la ter be re move d).
DIV A T /A ISDN M ode m User’s G u ide 2 4 Windows 3.x/WFW 3.11 If you a re installing the DIVA T/A ISDN Modem on a syste m without a CD drive , it is po ssible to ma ke disks f rom the DI VA T/A CD . To cr ea te the disks, follow the in struc tions in th e MA KED ISK.
DIV A T /A ISDN M ode m User’s G u ide 2 5 Installing the DIV A T/A Softw are Befo re you p roceed , mak e sure yo u h ave comp leted th e pre- in sta ll ati on pro cedu re rel evan t to y ou r so ftware p la tform. T o fin d the p roced u re relev an t to yo ur p latform, s ee p age 1 2.
DIV A T /A ISDN M ode m User’s G u ide 2 6 2 Fro m t he C D S etu p screen , s elect “St art DIVA Term in al Ada pter s In stalla tion N ow” ; this star ts the Setup W iza rd .
DIV A T /A ISDN M ode m User’s G u ide 2 7 4 Specify whe re you w ant to install the DIVA T/A sof tware . Click next to install in the default dire ctory (the defa ult directory differs accord ing to your platfor m); otherwise, c lick the brow se button and selec t a direc tory, then c lick Next.
DIV A T /A ISDN M ode m User’s G u ide 2 8 6 On the Conf igur atio n Wiz a rd, c lic k Ne xt; f ollow th e Configuration Wiz ard’ s on-scr ee n instructions (if a working configura tion is detected, you a re notifie d and allowed to skip th e Wizard) .
DIV A T /A ISDN M ode m User’s G u ide 2 9 The Wi zard cl os es and th e Eico n DIV A Term inal Ad apters progra m appea rs (se e “The Windows 95/98/NT Eicon D IVA Terminal Ada pters Progra m” on page 30 f or more de tails). The installation under W indows 95/98/NT is complete a nd your DIVA T/A is ready to us e.
DIV A T /A ISDN M ode m User’s G u ide 3 0 The Windo ws 95/98/NT Eicon DIV A T erm inal Ada pt er s Program Note: This section applies to Windows 95/98 and NT users only . The Eicon DI VA Ter minal Adapters Progr am provides you with a varie ty of c onvenie nt utilities.
DIV A T /A ISDN M ode m User’s G u ide 3 1 Menu Optio ns The me nu bar provides you w ith a va riety of shor tcuts a nd utilities. You ca n launch c ommands from drop- down menus or by c licking icons. Displaying Icons on the Toolbar To display icons on the Me nu bar se lect Vie wToolbar (some icons appea r by def ault).
DIV A T /A ISDN M ode m User’s G u ide 3 2 Click or S elect To pe rfo rm this Action File De tails Displays a panel t hat cont ai ns detai l s ab ou t you r D IVA T /A. U se it if you ne ed to d e termine de tails ab out y ou r confi gur at i on (such as your f ir m ware ve rsi on).
DIV A T /A ISDN M ode m User’s G u ide 3 3 Usin g t he W i n d ows 95/ 98/ N T Confi guratio n To ol This section shows you how to use the Windows 95/98/NT Configuration Tool to configure one or more configur ation profiles. About Configuration Profiles A profile is a set of pa ramete rs that def ine a pa rticular ISDN setup.
DIV A T /A ISDN M ode m User’s G u ide 3 4 • Adva nced . Advan ced ISDN pa r a m et er s such a s Dyna m i c Ban d widt h Al l ocati on (DBA), a n d Da t a Over Voice (DOV). This info r mation is o ptio n al. Using Context Sensitive Help Conte xt sen sitive h elp is a va ilable on a ll the Conf igur ation T ool’ s scre ens.
DIV A T /A ISDN M ode m User’s G u ide 3 5 Configuring Profiles under Windows 95/98/NT Follow the step s belo w to c onfig ure a p rof ile: 1 Do one of the following: • Click the icon on your taskba r (W indows 95/98 only).
DIV A T /A ISDN M ode m User’s G u ide 3 6 4 From the Protocol tab, selec t the ISDN conne ction protocol that you want to use ( it must m atch the protocol on the r eceivin g system) . Follow th e gu ideline s be low. Note : t he sample abov e depi c ts the Int ernati onal ve rsion of t he DIVA T/A Configuration Tool.
DIV A T /A ISDN M ode m User’s G u ide 3 7 • Multilink PPP doe s not support the c allback feature used by some se rve rs. • When using M ultilink PPP for inco ming calls, only SPAP or PAP authentication is supported.
DIV A T /A ISDN M ode m User’s G u ide 3 8 Spec if y y our ISDN S w itch T y pe, Telephone Numb er(s), an d Service Pro f ile ID (S PID ). U se the tab le b e lo w as a guid eline . Param eter Des cr iption and V alues Switch Type Specifie s the ISDN switch type used by your ISDN s ervice provi der.
DIV A T /A ISDN M ode m User’s G u ide 3 9 Param eter Des cr iption and V alues X.2 5 DT E Address Availab le with AO/DI su pport only An X.25 DTE Address identifi e s a node on an X.25 net work. T he a ddre ss is a series of one to fift e en di gi ts.
DIV A T /A ISDN M ode m User’s G u ide 4 0 Speci fy in for m a t i on a bout Ph on e 1 a n d Ph on e 2 . Use th e t a bl e be lo w as a guidelin e. Param eter Desc rip ti on This phone li ne is used for a fax/mode m only Selecting this option : • Enable s “3.
DIV A T /A ISDN M ode m User’s G u ide 4 1 7 If you ha ve ena bled AO/DI , selec t the X.25 tab, other wise go to step 8. Configure the X.25 options y ou w ant i mpl ement ed o n y o ur DIVA T/A. U se the tab le b e lo w as a guide lin e. Parameter Des cription X.
DIV A T /A ISDN M ode m User’s G u ide 4 2 Parameter Des cription Select Defa ul t t o use the T hroughput Cla ss specifie d i n your net work subscripti on, or sele c t one of the va l ue s betwee n 75 a nd 9, 600 bps. If you select a bps val ue, t he loc a l a nd re mot e DTEs can neg otiate to u se a low er v alue on a per-ca ll basis.
DIV A T /A ISDN M ode m User’s G u ide 4 3 Parameter Des cription Group number Speci fi es the num ber of t he cl osed user group you have subscribed t o. Obta in t hi s number from your system admi ni strat or or ne twork subscription. Othe rs Lets you request additional facilities that are not listed in the Common Facilities group box.
DIV A T /A ISDN M ode m User’s G u ide 4 4 Configure th e B ACP o ptions y ou w an t i m plement ed on y our DIVA T/A. U se the tab le b e lo w as a guide lin e. Parameter Des cription BACP/BOD (Bandwidth Allocation Control Protocol/ Bandwidth on Demand) Note : Only appli c able i f y our ISDN connec ti on pr otocol is Mu ltilink PPP.
DIV A T /A ISDN M ode m User’s G u ide 4 5 Parameter Des cription In itial B illing I nt erval: Specif ies th e length of the first billing interval (in seconds ). For exampl e , if your provi de r cha rge s a fi xed $X for the first 5 m i nute s ent er 300.
DIV A T /A ISDN M ode m User’s G u ide 4 6 Parameter Des cription 2nd B- chann el Delay before opening: Specify t he am ount of time (i n seconds) the t hroughput on your 1st B- chann el must ex ceed the O penin g Thr esho ld before the 2nd B-c ha nnel i s added t o t he AO/DI connec tion.
DIV A T /A ISDN M ode m User’s G u ide 4 7 9 Sel ect the A dvan ced t ab. Note: The above sc reen de picts the North Americ an version of the software; if you are using an I nternational version of the software, the Data Ove r Voice ( DOV) fie ld does not appear.
DIV A T /A ISDN M ode m User’s G u ide 4 8 Param eter Des cr iption and V alues Dat a Ov e r Voic e Not e: Availabl e on North Ameri c a n mode ls only. Sp ecifies D ata O ver V oice Bear er Cap ability as the outgoi ng c al l type . If v oice calls ar e less expen siv e than data calls in your tariff a re a, you c a n sel ec t thi s option.
DIV A T /A ISDN M ode m User’s G u ide 4 9 Using the W indo ws 3.x/ WFW 3.11 Configuration T ool The DIV A T/A Windows Configura tion Tool allows you to view the DIVA T/A ve rsion and f irmware proper ties, download update d versions of the firmwar e, and c onfigure dialing and communication info rmat io n.
DIV A T /A ISDN M ode m User’s G u ide 5 0 2 The Proper ties scr een ope ns. From this scree n, verif y the firmwar e ver sion curre ntly loaded on your DIV A T/A. 3 To download a ne w firmwa re ve rsion, see the sec tion “Updating the DIVA T/A F irm ware” on page 70.
DIV A T /A ISDN M ode m User’s G u ide 5 1 Profile Configuration The DI VA T/A conf iguration settings are organiz ed into profiles a nd save d in the unit’s non- volatile memor y. Your D IVA T /A come s equipped with a f ac tory profile whic h require s only your ISDN info rma tion to esta blish a Mu ltilink PPP c onnection.
DIV A T /A ISDN M ode m User’s G u ide 5 2 2 Sele ct a pro file fr om the list (Pro file 0, Prof ile 1, or Prof ile 2) , and click Configure Profile.
DIV A T /A ISDN M ode m User’s G u ide 5 3 Configure the f ollowing paramete rs: Parameter Des cription Local Switc h Type Specifie s the ISDN switch type used by your ISDN s ervice provi der. Nort h A merican firm ware: For m o st locat i ons, t he de fa ult North Ame ric a (Auto- Detect ) should be used.
DIV A T /A ISDN M ode m User’s G u ide 5 4 Param eter Des cr iption and V alues Connect using t hi s protocol (Continued) Note : To obt ain m axim um M ultilink PPP performance, y ou ne ed a P C e quippe d wi th a UART 16650 (you might nee d t o instal l a fast com port card), whi ch supports COM port speed of 230.
DIV A T /A ISDN M ode m User’s G u ide 5 5 4 If your DIVA T/A is e quipped with analog ports, c lick the Phone Lines button to open the Phone Lines window; otherw ise go to step 5 and c ontinue.
DIV A T /A ISDN M ode m User’s G u ide 5 6 Parameter Des cription Enable d istinctiv e ring Changes the sound of the phone’s ring. This lets you distinguish calls received on Phone line 1 from calls received on P hone Line 2. Note s: • Selec t Disti nc ti v e R i ng on only one phone, otherwise both will r ing the same.
DIV A T /A ISDN M ode m User’s G u ide 5 7 6 In the Adva nced w indow, configure the adva nce d para meters. Use t he t abl e bel ow as a gu idel i ne. Note: The above sc reen de picts the North Americ an version of the software; if you are using an I nternational version of the software, the Data Ove r Voice ( DOV) fie ld does not appear.
DIV A T /A ISDN M ode m User’s G u ide 5 8 Param eter Des cr iption and V alues DBA (Dynamic Bandwidth Allocation ) Note : Only appli c able i f y our ISDN connec ti on pr otocol is Mu ltilink PPP. Note : Only avai l able on model s equippe d wi th analog devi c e ports.
DIV A T /A ISDN M ode m User’s G u ide 5 9 Parameter Des cription ISDN Cost Reducti on Timers (Continued) Billing In terva l: Specifies the i ncre m ent s your Ser vice Pr ovid er us es to bill s ubs equen t us age of your ISD N line (usage after the initial Billing Interval e xpire s).
DIV A T /A ISDN M ode m User’s G u ide 6 0 Using the VT 100 Configurat ion T ool The sec tion below desc ribes how to c onfigure your DIVA T/A under DOS and OS /2 . The VT100 Configura tion Tool is incorpora ted in the DIV A T/A firm ware. Use i t t o co nfig ure bas ic IS DN-sp ecifi c paramet ers.
DIV A T /A ISDN M ode m User’s G u ide 6 1 3 Enter the f ollowing command at the prompt and pr ess Enter : AT@MENU The main VT100 Configura tion Tool scree n opens: *-----------------------------------------------------------------------------* | DIVA T/A ISDN Modem – North American Version 1.
DIV A T /A ISDN M ode m User’s G u ide 6 2 Key Functi on F2 Selects a sp ecific field . Pres s F 2, an d enter th e letter corresponding to t he fie l d you want t o e dit .
DIV A T /A ISDN M ode m User’s G u ide 6 3 Configure the f ollowing paramete rs: Parameter Des cription Switch Type Specifie s the ISDN switch type used by your ISDN s ervice provi der. Nort h A merican firm ware: For m o st locat i ons, Auto-de te c t should be used.
DIV A T /A ISDN M ode m User’s G u ide 6 4 Parameter Des cription Directo ry N umber (1 st /2 nd Numb e r ) Specifie s your ISDN number(s). You can specify ei t her one or t wo ISDN numbers (1 st and 2 nd ). Speci fy t wo numbers if your ISDN provider assigns two different numbers.
DIV A T /A ISDN M ode m User’s G u ide 6 5 The following par ameter s can be configure d: Parameter Des cription Use modem/fa x onl y (Phone 1 and 2) Enabling this option caus es the follow ing: • Enable s “3. 1KHz Audio”. T hi s sp ecifies th at the IS DN netw ork has to pres erv e the qua lity of th e 3.
DIV A T /A ISDN M ode m User’s G u ide 6 6 Parameter Des cription Region (Intern ation al/E uro firmware only) Specify the c ountry i n whic h you a re situ ated. This ens ures that the D IV A T/A impl ements th e ring pattern ( and other ana l og devi c e para m et e rs) suited to your country.
DIV A T /A ISDN M ode m User’s G u ide 6 7 The following par ameter s can be configure d: Parameter Des cription Ena bl e DOV (Data Over Voice) (No rth A me rica only) Sp ecifies D ata O ver V oice Bear er Capab ility as th e outg oing call ty pe.
DIV A T /A ISDN M ode m User’s G u ide 6 8 Parameter Des cription Enable BACP/BOD (Bandwidth Allocation Control Protocol/ Bandwidth on Demand) Note : Only appli c able i f y our ISDN conn ection pr oto col is M ultilink PPP. Activates the D IV A T/A ’s automatic traf fic monitor for M ultilin k PPP Connect i ons.
DIV A T /A ISDN M ode m User’s G u ide 6 9 Param eter Des cr iption and V alues Initial Billin g Interval Billing I nterv al (Continued) Billing In terva l: S pecifies the incr ements your Service Provider us es to bill s ubsequent usage of your ISDN line (usage aft e r the initial Billin g Inter val exp ires) .
DIV A T /A ISDN M ode m User’s G u ide 7 0 Updatin g the DIV A T/A Firmw are This section contains proc edur es for loa ding new firmwa re. Updati ng Fi rm war e unde r Wi ndow s 3.x/W FW 3. 11 Warning: When you update y our DIVA T/A firmware, the current profile con figuration s might g et e rase d.
DIV A T /A ISDN M ode m User’s G u ide 7 1 3 Click Yes whe n prompted if you wa nt to continue. 4 Select the de vice with the re quired f irmware and c lick OK (if nec essa ry clic k Ha ve Firmwa re , an d spec ify the pa th to the firm ware; cl ick Op en).
DIV A T /A ISDN M ode m User’s G u ide 7 2 Updati ng the DI VA T /A INF fi le (Wi ndow s 3.x/W in dows NT 3. 51) Note: This section only applies if you are using RAS. To update the DI VA T/A INF file: 1 Open a ny text editor. 2 Open the file MOD EM.
DIV A T /A ISDN M ode m User’s G u ide 7 3 Using the D IV A T/A Once you have installed a nd configur ed DIV A T/A, you ca n dial into your offic e LAN or access t he In ternet .
DIV A T /A ISDN M ode m User’s G u ide 7 4 SecurI D Conn ect ivit y To connec t using SecurID , ref er to the se ction appropr iate to the protocol and ope rating system you a re using. Using V.120 on Windows 95/98 The following exa mple demonstrate s how to use V.
DIV A T /A ISDN M ode m User’s G u ide 7 5 Using PPP and Multilink PPP If you wa nt to use PPP or Multilin k PPP to access a S ecurID s erver, ask your a dminist rator : • what ty pe of remot e ac.
DIV A T /A ISDN M ode m User’s G u ide 7 6 Eac h time you a ttempt to ma ke your c onnec tion, ther e is one more step to comp lete . You hav e to a dd th e c omman d "&% n" a fte r th.
DIV A T /A ISDN M ode m User’s G u ide 7 7 Dialing with Mu ltilin k PPP Whe n you esta blish a Multilink PPP c onn ecti on , each B -ch annel connec ts to a re mote-direc tory number . In some ISDN im pl emen tat io ns each B -chan nel c onnects to a unique number.
DIV A T /A ISDN M ode m User’s G u ide 7 8 Dialing with A O /DI Whe n you esta blish a Multilink PPP c onn ecti on , each B -ch annel connec ts to a re mote-direc tory number . In some ISDN im pl emen tat io ns each B -chan nel c onnects to a unique number.
DIV A T /A ISDN M ode m User’s G u ide 7 9 For Windows 95/98 on ly. If you use “ ~” or “&” to sepa ra te the Phone-Number s, desele ct the “U se Country and a rea code ” par amete r on the Proper ties tab of Dial- Up Networ king. Manually ente r the Country Code, Area Code, and PBX Prefix (if require d) for both numbers.
DIV A T /A ISDN M ode m User’s G u ide 8 0 Establishi ng a Co nnec tio n Go to the sec tion that corre sponds to your platfor m and follow the proce dure. Windows 95/98 1 Double-c lick the Dial-U p Networking icon. 2 Double-c lick Make New Conne ction.
DIV A T /A ISDN M ode m User’s G u ide 8 1 5 Enter your use r na me and pa ssword, and c lick Connect. 6 If you su c ce ssfully establish the conne ction, you can communicate w ith the remote host. If you do not establish the connec tion, ver ify your Ser ver T ype and TCP/IP settings a nd alt er th em as requi red.
DIV A T /A ISDN M ode m User’s G u ide 8 2 3 The Phonebook Entry Wiz ard ope ns. Click Next. 4 Ch eck each ap pl icab le s tat emen t, th en cl ick Next .
DIV A T /A ISDN M ode m User’s G u ide 8 3 6 Click Fini sh. 7 Click D ia l. 8 Enter your use r na me and pa ssword, then c lick OK. 9 If you su c ce ssfully establish the conne ction, you can communicate w ith the remote host. If you do not establish the connec tion, ver ify your c onfigura tion and TCP/IP settings an d alt er th em as requi red.
DIV A T /A ISDN M ode m User’s G u ide 8 4 Windows NT 3.51 Note: The follow ing examp le assumes y ou are using RAS. 1 In the Remote A cce ss Service group, double- click Remote Access . 2 Click A dd. 3 Enter the na me and phone number you wa nt to call, then click OK.
DIV A T /A ISDN M ode m User’s G u ide 8 5 4 Click D ia l. 5 Enter your use r na me and pa ssword, then c lick OK. 6 If you su c ce ssfully establish the conne ction, you can communicate w ith the remote host. If you do not establish the connec tion, ver ify your c onfigura tion and TCP/IP settings, an d alt er th em as requi red.
DIV A T /A ISDN M ode m User’s G u ide 8 6 Windows 3.x The following exa mple assume s you are using the Shiva PPP pr oto co l st ack. Note: If your workstation is configured as a Windows for Workgroups Remote Ac ce ss Servic e (RAS) client, you must c onfigure the V.
DIV A T /A ISDN M ode m User’s G u ide 8 7 4 Select the Tools menu, a nd choose Port Setup. S elec t the DIV A T/A a s the mode m, the n clic k O K. 5 Click O ptions .
DIV A T /A ISDN M ode m User’s G u ide 8 8 6 Ens ure t hat IP X and/o r IP are en abl ed, t hen cli ck OK. 7 Click Connect. 8 If you su c ce ssfully establish the conne ction, you can communicate w ith the remote host. If you do not establish the connec tion, ver ify your c onfigura tion and TCP/IP settings, an d alt er th em as requi red.
DIV A T /A ISDN M ode m User’s G u ide 8 9 DOS 1 Ensur e tha t the ShivaRe mote conn ec tion sof twa re (or similar ) is installed on your computer . 2 Ente r the fo llowing comma nd: C:SHIVACONNECT 3 From the Tools menu, choose Port Setup and se lect the COM port.
DIV A T /A ISDN M ode m User’s G u ide 9 0 7 Enter your use r name , passwor d, and the phone number you want to dial, then click Connec t. 8 If you su c ce ssfully establish the conne ction, you can communicate w ith the remote host.
DIV A T /A ISDN M ode m User’s G u ide 9 1 OS/2 1 Double-c lick Programs, then double -click I nterne t Modems. 2 Double-c lick Dial Other Interne t Providers.
DIV A T /A ISDN M ode m User’s G u ide 9 2 4 Enter your Login I D, Password, a nd the Phone Number you want to dial. 5 Click Connect Info, the n enter your Domain Na me ser ver, your Host Name , and your Ser ver Na me.
DIV A T /A ISDN M ode m User’s G u ide 9 3 7 Cl ick Di al t o pl ace your call. 8 If you su c ce ssfully establish the conne ction, you can communicate w ith the remote host. If you do not establish the connec tion, ver ify your c onfigura tion and TCP/IP settings, an d alt er th em as requi red.
DIV A T /A ISDN M ode m User’s G u ide 9 4 Co nnec ting t o the Wo rld Wi de We b To c onne ct to the W or ld Wid e W eb , follo w the instru ction s in the section “E stablishing a Connection” on page 80; when the proce dure instructs you to enter a dial-up number , enter the number of your Intern et S ervi ce Pro vi der (IS P).
DIV A T /A ISDN M ode m User’s G u ide 9 5 RVS- COM Suppo rt (For Windows 95/ 98 and Window s NT only) The DIV A T/A supports both the Lite and Full versions of RVS-COM 1.38. RVS-COM adds the following fe atures to your D IVA T/A: • File Tra nsfer/ISD N Eurofile Transf er .
DIV A T /A ISDN M ode m User’s G u ide 9 6 A utoma ted SPID Selection (AutoSPID) (North America only) AutoSPID is a new Na tional ISDN protocol f eature that ena bles the DIV A T /A to dow nloa d a list of Se rvic e Pr ofile Id entif ier s (SPI Ds), Direc tory Number ( DN) a nd Call Type (CT) information from the ISDN line.
DIV A T /A ISDN M ode m User’s G u ide 9 7 Non-Init ializ ing T er mina l Mode (North America only) Non- In itializ ing Te rmin al ( NIT ) mod e is a ne w ISD N pr otoc ol fe atu re that enable s the DIV A T/A to opera te without SPIDs. You can use NIT only if your I SDN provider suppor ts it.
DIV A T /A ISDN M ode m User’s G u ide 9 8 Analog De vice Suppor t (Only available on some models) The DIV A T/A has two a nalog device ports that let you connec t analog de vices suc h as ordinar y telephone s, answe ring machine s, fax mach ines , an d m odem s.
DIV A T /A ISDN M ode m User’s G u ide 9 9 Multilink PPP with AO/DI support In th e c a se o f Mu ltilink PPP w ith AO /DI s upport, both ana log devices ca n still be use d as A O/D I use s the ISDN D- cha nne l X- 25 pa ck et servic e to maintain an "a lways on" conne ction betwe en you a nd your Service Provider.
DIV A T /A ISDN M ode m User’s G u ide 1 0 0 Calling Fea tu res (North Ameri ca on ly ) Note: If you did not use EZ-ISDN or IO C to order your line, ve rify that the DIVA T/A’s default settings are compatible with those of your ISD N provid er be fore using this fe ature .
DIV A T /A ISDN M ode m User’s G u ide 1 0 1 hold and the se cond ca ll is answer ed. You c an pre ss the r eceiver button to toggl e betwe en the 2 c alls. If your phone inc ludes Calle r ID (see below) , the phone will display the numbe r of the sec ond incoming c all ( the ca ll wa iting).
DIV A T /A ISDN M ode m User’s G u ide 1 0 2 Call Transfer (implicit) Call Transfe r allows you to disconne ct from a Three -Wa y Confere nce call and l eave t he o ther t wo peop le con nect ed. It work s as fol low s: Establish a Three -W ay ca ll as descr ibed in the sec tion above.
DIV A T /A ISDN M ode m User’s G u ide 1 0 3 4 Type following commands: AT*K1= n <ENTER> where n is the value provide d by your ISDN pr ovider for 3-Wa y Co nferenci ng . AT*K3=n <ENTER> where n is the value provide d by your ISDN pr ovider for Call Drop.
DIV A T /A ISDN M ode m User’s G u ide 1 0 4 App endix A: ISDN Line T er mina tion Thi s s ecti on ap pl ies to S /T int erface us ers i n Au st rali a and No rth Americ a.
DIV A T /A ISDN M ode m User’s G u ide 1 0 5 Multip le IS DN Devices If th e NT1 i s co nnect ed t o more than one ISDN devi ce, foll ow th e appropr iate proc edure below. 75 meters or more If the connec tion spans 75 meter s (250 fe et) or mor e, set the D IVA T/A 100 Ω switch to the On position.
DIV A T /A ISDN M ode m User’s G u ide 1 0 6 App endix B : T r oubleshooting the DIV A T/A This sec tion provide s informa tion that will he lp you to trouble shoot DIVA T/A probl ems.
DIV A T /A ISDN M ode m User’s G u ide 1 0 7 D LED LED I nd i c a t o r Desc rip ti on Off • The ISD N physical interface is not activated. The LINK LED might provi de a ddit iona l sta tus informat ion. Flashing • The ISDN physical interface is activated and initializing.
DIV A T /A ISDN M ode m User’s G u ide 1 0 8 PHON E L ED s 1, 2 LEDs LED I nd i c a t o r Desc rip ti on Off • No call activ ity on the sp ecified v oice chan nel. Flashing • An outgoing or inc om ing c onne ct i on is bei ng establis hed on the s pecif ied voi ce channel.
DIV A T /A ISDN M ode m User’s G u ide 1 0 9 Othe r LE Ds FAULT LED LED I nd i c a t o r Desc rip ti on Off • The unit is oper ating w ithin n ormal par ameters. Flashing • Indica t es a ha rdware fa ult c ondit ion. Stead y • Indica te s a software faul t condi t ion.
DIV A T /A ISDN M ode m User’s G u ide 1 1 0 The DIVA T/ A has trou ble detecting incoming voice calls on the analog device lines . There might be a problem with distinctive ring. Open the Configuration Tool and disable distinctive ring in the Phone Lines panel.
DIV A T /A ISDN M ode m User’s G u ide 1 1 1 When y ou pi ck up th e phon e you do not get a dial tone. Make sure the ISDN line has voic e c apa bility. If you a re using the S/T version, try re moving other ISDN equipment on the line. Tr y using a differ ent SPID and DN on the phone port.
DIV A T /A ISDN M ode m User’s G u ide 1 1 2 4 Type following commands: AT*Vn= 1 <ENTER> where n is the number of the analog de vice. 5 Save the ne w se ttings so th at the y ar e a va ilable e ver y time you start the DI VA T/A.
DIV A T /A ISDN M ode m User’s G u ide 1 1 3 Dumping the DI VA T/A M emory If a softwar e fa ult condition occurs while you a re using the DIVA T/A, you need to ca pture a memory dump of the DIV A T/A.
DIV A T /A ISDN M ode m User’s G u ide 1 1 4 DIV A T/A Firmw are Specif ications Software Feat ure Supported on the DIV A T/A WAN Protocols • PPP (Point - t o- Poin t Prot oc ol ) • Multilin k P PP • Alwa y s On/ Dyn a m i c ISDN ( AO/ DI ) • ISDN (Q.
DIV A T /A ISDN M ode m User’s G u ide 1 1 5 Software Feat ure Supported on the DIV A T/A Managem ent and Configurati on • SPID Wiz ar d • Windows Configurat i on Tool • VT-100 Terminal Emul a.
DIV A T /A ISDN M ode m User’s G u ide 1 1 6 DIV A T/A Har dw are Specif ications Ha rd w a re Fe a t ure Supported on the DIV A T/A ISDN Interface • 1 ISDN BR I U or I SDN BR I S/ T (RJ45) Analo g dev ice Interf aces (select ed m odels only) • 2 Analog Ports (RJ11) Console Port • RS-232 Asynchronous • 1200 bps to 230.
DIV A T /A ISDN M ode m User’s G u ide 1 1 7 Custom er Ser vice To obtain technica l support, contac t either Eicon Te chnology or your Eicon Technology supplier, de pending on your loca tion. From som e regions, you c an sa ve time and long-dista nce cha rge s by faxing Eic on Technology a descr iption of your situation.
DIV A T /A ISDN M ode m User’s G u ide 1 1 8 Inter nat ional Reg ulat or y Inf or m ation a nd C ondit ions of Use Regulatory Information for the United States: FCC Warning Declaration of Conformity We: Ei con T echnology I nc.
DIV A T /A ISDN M ode m User’s G u ide 1 1 9 Thi s equi pment cannot be used on t e l ephone company-pr ovided coi n servi ce. C onnect i on t o party l ine se r vi ce is s ubj ect t o stat e tar if f s .
DIV A T /A ISDN M ode m User’s G u ide 1 2 0 Regulatory Information for Europe Thi s equi pment di spl a ys t he CE 168 m ar k to show t hat i t has been t est ed and found t o be in fu ll co mp lia.
DIV A T /A ISDN M ode m User’s G u ide 1 2 1 Limited W arra nty Ei con T echnology C orpor at ion w ar rant s to t he ori ginal pur chaser of thi s Ei con Technol ogy Pr oduct that it is t o be in g.
Product C omm ent Form DIVA T /A I SDN Mo d em User ’s G uide 206-152-04 We va lue your c omments. Please use the tables be low to rate this product.
An important point after buying a device Hayes Microcomputer Products DIVA T/A ISDN (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hayes Microcomputer Products DIVA T/A ISDN yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hayes Microcomputer Products DIVA T/A ISDN - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hayes Microcomputer Products DIVA T/A ISDN you will learn all the available features of the product, as well as information on its operation. The information that you get Hayes Microcomputer Products DIVA T/A ISDN will certainly help you make a decision on the purchase.
If you already are a holder of Hayes Microcomputer Products DIVA T/A ISDN, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hayes Microcomputer Products DIVA T/A ISDN.
However, one of the most important roles played by the user manual is to help in solving problems with Hayes Microcomputer Products DIVA T/A ISDN. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hayes Microcomputer Products DIVA T/A ISDN along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
