Instruction/ maintenance manual of the product HNC210 Hawking Technology
Go to page of 24
1.
Step 1: Check Conte nts & Install at i on Re qui rements 3 Step 2: Physical Description 5 Step 3: Hardware Installation 7 Step 4: Run the Quick Setup Wizard 9 Step 5: Viewing & Tips 24 2.
Congratulations on the purchase of your new Hawking Net- Vision TM HNC210 Wired 10/100Mbps Network Camera. The HNC210 is a high perform ance standalone camera system that provides an ideal solu tion for remote mo nitoring, surv eillance, or sending l ive vide o over the I nternet.
4.
Front Panel Lens & Manual Focus Rin g LED: Link/Activit y LED: Read y LEDs - Link/Activity: Green when monitoring; flash ing for v ide o transmission/ reception - Ready: Orange when device is powe.
Bottom Panel Reset Button Power In p ut LAN Port 6.
1 1 Locate the net work cable connector (RJ-45 port) on the camera’s bottom panel. Conn ect an Ethernet cable to the port. Connect the ot her end of the cable to the network.
2 2 Locate the power input connector on the camera’s bottom panel, and att ach the external power supply. Then, plug the adapter into an ava ilable outlet. Ple ase check to see that the ora nge “Ready” LED lo cated next to the lens of the camera is lit t o ensure that the cam era is powered on.
1 Insert the Hawkin g Net-Vision TM HNC210 Installat ion & Utilities CD into your CD-ROM Drive. When the main page loads, click on Quick Setup Wizard .
2 2 The Setup Wizard will search fo r similar cameras available on your local area network. A “similar” cam era will have the same code of four letters at t he beginning of its serial number. This code is “HEMT” and can be found on either the ri ght or left panel of the box, or on the label on the bott om of the cam era.
Each available camera will be displayed in the camera list with its MAC ad dress, current default IP address, an d model number. (NOTE: The Setup Wizar d may display an IP address for the camera that is already consistent wit h your network [LAN] settings, rather than the default on e.
3 Next, the login username and password screen will appear. Please type in the de fault logi n and password a nd then press “ OK ”. The default values are: Login: admin Password: 12 34 If you have al ready set a usernam e and password , enter them and press “ OK ”.
4 The Setup Wizard will try to determine your network settings. If a DHCP server is prese nt on your net work, the Wizard will obtain your network settings and auto matically configure you r network camera to oper ate on your LAN by returning network settings that are con sistent with your network.
4 14.
5 To protect your camera fro m unauthorized access and use, you will need to chang e the Admin Password , which is “1234” by default . The password can have a ma ximum of four characters . Confirm the new pass word by typing i t again identically in the “R econfirm” field.
6 The following status page will appear. It will display a summary of t he changes y ou have m ade to the netwo rk camera’s settings. If all the settings are correct, click Next to continue.
7 The setup process has now been completed. Please brief ly revie w the te xt on t he page before clicki ng on Reboot . After clicking Reboot , the Setup Wizard will close.
Example on How to Set th e IP Address Manua lly The example shown her e illustrates how to manually set an IP address using the Windows XP operating system.
a. Click on Start in the bottom l eft corn er of your screen. Then click on My Network Places . a 19.
b. Click on View Network Connections . b 20.
c. In the Network Connections window, you should see an icon titled Local Area Connection (or something similar). You can access this icon in two ways : a . by clicking or doub le- clicking on it, or b . by right-clicking on it and then clicking on Status from the resulting menu.
d. A window with the title Local Area Connection Status (or something similar) will appear. (See the figure on the following page.) Click on the Support tab. Un der the heading Address Type , you will find an IP Address line and a Default Gateway line.
d 23.
• You can access an d view your net work camera’s images via a web browser by typing “http:// IPAddressofCamera ” in the address bar. • You ca n also use the i ncluded software a pplication t o view, record, and playb ack the network camer a’s images.
An important point after buying a device Hawking Technology HNC210 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hawking Technology HNC210 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hawking Technology HNC210 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hawking Technology HNC210 you will learn all the available features of the product, as well as information on its operation. The information that you get Hawking Technology HNC210 will certainly help you make a decision on the purchase.
If you already are a holder of Hawking Technology HNC210, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hawking Technology HNC210.
However, one of the most important roles played by the user manual is to help in solving problems with Hawking Technology HNC210. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hawking Technology HNC210 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
