Instruction/ maintenance manual of the product Universal Telescoping Computer Base C-TCB-14 Havis-Shields
Go to page of 2
C-TCB-14_INST_8-07 INSTALL INSTRUCTIONS C-TCB-14 UNIVERSAL TELESCOPING COMPUTER BASE TOOLS REQUIRED: 3/16” Allen wrench Ratcheting Wrench Standard Socket Set Powered Drill (if necessary) Drill Bit S.
C-TCB-14_INST_8-07 INSTALLATION: 1. Mount C-TCB-14 to Havis-Shields Trak Mount: • Mount console, transmission hump bracket(s), and Trak m ount being sure to leave room for C-TCB-14 • Slide (4) ¼-20 x ½” Hex head bolts, (2) in each rail. • Place Pole support assembly so slots line up with hex head bolts on Trak mount.
An important point after buying a device Havis-Shields Universal Telescoping Computer Base C-TCB-14 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Havis-Shields Universal Telescoping Computer Base C-TCB-14 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Havis-Shields Universal Telescoping Computer Base C-TCB-14 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Havis-Shields Universal Telescoping Computer Base C-TCB-14 you will learn all the available features of the product, as well as information on its operation. The information that you get Havis-Shields Universal Telescoping Computer Base C-TCB-14 will certainly help you make a decision on the purchase.
If you already are a holder of Havis-Shields Universal Telescoping Computer Base C-TCB-14, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Havis-Shields Universal Telescoping Computer Base C-TCB-14.
However, one of the most important roles played by the user manual is to help in solving problems with Havis-Shields Universal Telescoping Computer Base C-TCB-14. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Havis-Shields Universal Telescoping Computer Base C-TCB-14 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
