Instruction/ maintenance manual of the product S-CM-112-IMP-1 Havis-Shields
Go to page of 3
3 INSTALL INSTRUCTIONS S-CM-112-IMP-1 RADIO RELOCATION HOUSING 2006-2009 CHEV ROLET IMPALA TOOLS REQUIRED: Ratcheting wrench Socket set Screwdriver set T-20 torx bit HARDWARE: QTY DESCRIPTION PART # 2.
Remove lower plastic trim panel and disconnect cable fr om lighter plugs. Attach mounting bracket to AM/FM radio and install torx screws to hold radio. Remove AM/FM radio screws, wire harness and antenna. Remove trim around AM/FM radio and thermostat controls.
Mount “hat” bracket to studded mounting plates. Mount assembled AM/FM radio bracket and radio to main relocation housing. Slide studded mounting plates into the slots used previously to hold the trim p anel that contained the li g hter p lu g s. Attach main relocation housing to mounting “hat”.
An important point after buying a device Havis-Shields S-CM-112-IMP-1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Havis-Shields S-CM-112-IMP-1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Havis-Shields S-CM-112-IMP-1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Havis-Shields S-CM-112-IMP-1 you will learn all the available features of the product, as well as information on its operation. The information that you get Havis-Shields S-CM-112-IMP-1 will certainly help you make a decision on the purchase.
If you already are a holder of Havis-Shields S-CM-112-IMP-1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Havis-Shields S-CM-112-IMP-1.
However, one of the most important roles played by the user manual is to help in solving problems with Havis-Shields S-CM-112-IMP-1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Havis-Shields S-CM-112-IMP-1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
