Instruction/ maintenance manual of the product KK-K9-D22-K Havis-Shields
Go to page of 11
KK-K9-D22-K_INST_9-07 INSTALLATION INSTRUCTIONS KK-K9-D22-K K-9 TRANSPORTATION KIT 2005-2008 DODGE MAGNUM TOOLS REQUIRED: Power Drill Drill Bit Set Standard Wrench Set Standard & Metric Socket Set.
KK-K9-D22-K_INST_9-07 # Description 1. Front Cage 2. Rear Cage 3. Floor 4. Ceiling 5. D.S Front Cage. Upper Lexan Filler 6. P.S. Front Cage Upper Lexan Filler 7. D.S. Front Cage Lower Aluminum Filler 8. P.S. Front Cage Lower Aluminum Filler 9. D.S. Step Sill Aluminum Filler 10.
KK-K9-D22-K_INST_9-07 # Description 1. Front Cage 2. Rear Cage 3. Floor 4. Ceiling 5. D.S Front Cage. Upper Lexan Filler 6. P.S. Front Cage Upper Lexan Filler 7. D.S. Front Cage Lower Aluminum Filler 8. P.S. Front Cage Lower Aluminum Filler 9. D.S. Step Sill Aluminum Filler 10.
.
KK-K9-D22-K_INST_9-07 Always ! Read all instructions before installing any Havis-Shields Equipment Corp products. Check for obstructions (Wire, brake lines, fuel tank, etc.
KK-K9-D22-K_INST_9-07 • Place floor in vehicle and bu tt up to rear-mounting foot. 2. Mount Rear Cage: • Place rear cage on top of floor. • Attach rear-mounting foot to aluminum floor and rear cage using ¼-20 x ¾” Stainless carriage bolts and serrated nuts.
KK-K9-D22-K_INST_9-07 5. Mount Aluminum Step sills • Center floor inside vehicle. • Front edge of floor will line up with front edge of step sill. Top of Step sill will mold to curve of trim. • Pre-drill and attach using #10 x ½” Stainless sheet metal screws.
KK-K9-D22-K_INST_9-07 7. Rear Lower Fillers • Position and attach to rear cage using #10 x ¾” Stainless sheet metal screws. • Filler lines up with bend on rear cage, • Attach to step trim using #10 x ¾” Stainless sheet metal screws. Note: apply pressure to filler panels while insta lling, in order to get a clean tight fit.
KK-K9-D22-K_INST_9-07 10. Mount door panels: • Center so edges do not hang over. • Attach top lip of door panel to vehicles door using #10 x ¾” Stainless flat head screws. Be sure to use a 5/32” pilot and wax screw. • Proceed to mount remainder of door panel.
KK-K9-D22-K_INST_9-07 11. Mount window guards: Note: window guards have holes around perimeter for permanent mounting. These holes are not used with hinge kit. They also come flat in shipping. The guard must be pre-bent (outward) so it fits the contour of the vehicles window frame.
KK-K9-D22-K_INST_9-07 13. Front Lower Aluminum Fillers: • Attach as shown using (3) ¼-20 x ¾” carriage bolts and serrated nuts. • Close door to position, then tighten. 14. Front Upper Lexan Fillers: • Close door to position. • Drill ¼” holes through lexan and cage.
An important point after buying a device Havis-Shields KK-K9-D22-K (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Havis-Shields KK-K9-D22-K yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Havis-Shields KK-K9-D22-K - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Havis-Shields KK-K9-D22-K you will learn all the available features of the product, as well as information on its operation. The information that you get Havis-Shields KK-K9-D22-K will certainly help you make a decision on the purchase.
If you already are a holder of Havis-Shields KK-K9-D22-K, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Havis-Shields KK-K9-D22-K.
However, one of the most important roles played by the user manual is to help in solving problems with Havis-Shields KK-K9-D22-K. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Havis-Shields KK-K9-D22-K along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
