Instruction/ maintenance manual of the product C-TM-IMP Havis-Shields
Go to page of 2
TRAK-MOUNT ASSEMBLY (Image Upside down) INSTALL INSTRUCTIONS C-TM-IMP 2000-2005 CHEVROLET IM PALA TRAK-MOUNT KIT TOOLS REQUIRED: Ratcheting Wrench Metric Socket Set Torx Bit Set Standard Socket Set Ta.
C-TM-IMP-INST-2- 07 2 INSTALLATION: 1. REMOVE SEATS: • Remove rear seat base torx bolts. • Slide seat to rear most position. • Seats do not have to come out of vehicle, they will jus t need to be tilted out of way to place Trak-Mount assembly. Be careful of wire plugs if vehicle has power seats.
An important point after buying a device Havis-Shields C-TM-IMP (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Havis-Shields C-TM-IMP yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Havis-Shields C-TM-IMP - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Havis-Shields C-TM-IMP you will learn all the available features of the product, as well as information on its operation. The information that you get Havis-Shields C-TM-IMP will certainly help you make a decision on the purchase.
If you already are a holder of Havis-Shields C-TM-IMP, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Havis-Shields C-TM-IMP.
However, one of the most important roles played by the user manual is to help in solving problems with Havis-Shields C-TM-IMP. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Havis-Shields C-TM-IMP along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
