Instruction/ maintenance manual of the product C-TCB-28 Havis-Shields
Go to page of 3
3 INSTALL INSTRUCTIONS C-TCB-28 1997-2007 DODGE DAKOTA TELESCOPING COMPUTER BASE TOOLS REQUIRED: Ratcheting wrench 3/8” Metric Socket Set T-20 torx bit 3/8” Standard Socket Set Combination wrench .
C-TCB-28-INST-6-0 7 2 Install “Z” support bracket to base assembly using ¼ x ¾” carriage bolt and serrated nut. Re-attach front bolts on passenger- side seat through C-TCB base plate. Remove front bolts on passenger- side seat and position base assembly in front of seat mount brackets.
C-TCB-28-INST-6-0 7 3 Insert inner telescoping pole assembly and thread lock handle into pole support base assembly. Loosely attach lateral support brace to TCB base using 5/16” flat washer and 5/16” nylock nut Tighten 5/16” nylock nut Pre-drill floor of vehicle with 3/16” drill bit.
An important point after buying a device Havis-Shields C-TCB-28 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Havis-Shields C-TCB-28 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Havis-Shields C-TCB-28 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Havis-Shields C-TCB-28 you will learn all the available features of the product, as well as information on its operation. The information that you get Havis-Shields C-TCB-28 will certainly help you make a decision on the purchase.
If you already are a holder of Havis-Shields C-TCB-28, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Havis-Shields C-TCB-28.
However, one of the most important roles played by the user manual is to help in solving problems with Havis-Shields C-TCB-28. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Havis-Shields C-TCB-28 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
