Instruction/ maintenance manual of the product PKG-PSM-142 Havis
Go to page of 4
SPACER OFFSET MOUNT BASE SEAT BOLT SUPPLIED WITH HARDWARE KIT (FIG. 2) C-HDM-104 SHOWN VEHICLE MOUNTING BASE WITH SPACER AND OFFSET BRACKET PLACE THE SPACER AT THE 1. SEATBOLT LOCATIONS TO FILL THE GAP BETWEEN THE SEAT BRACKET AND BASE. (C-HDM-121 ONLY REQUIRES A SPACER ON THE DRIVERS SIDE BOLT).
A- GUIDE RING BUSHING REMOVAL WE STRONGLY RECOMMEND NOT TO REMOVE THE GUIDE RING BUSHING, BUT IF REMOVAL OF INNER POLE IS DESIRED - FOLLOW THIS SIMPLE REMOVAL INSTRUCTION INSERT MAXIMUM 1" DIAMETER OBJECT WITH 1. SUFFICIENT LENGTH AND DROP INSIDE INNER POLE.
1/4-20 NYLOCK NUT 1/4-20 FEMALE HANDLE C-HDM-301 INCL WITH C-HDM-302, 303, 304. GENERAL C-HDM-300's INSTALL INSTRUCTIONS ALIGN 4 MOUNTING STUDS OF MOUNTING DEVICE C-HDM- 1. 300's INTO THE HDM-200's SERIES MOUNTING SLOTS. BOLT THE MOUNT TOGETHER USING SPECIFIED AND SUPPLIED 2.
E- ATTACHING THE SHAFT STOP COLLAR THAT COMES WITH TELESCOPING POLE WITH HANDLE SLIDE THE INNER POLE TO THE DESIRED HEIGHT. 1. ATTACH THE SHAFT COLLAR USING THE HARDWARE 2. PROVIDED. INNER POLE SHOULD NOW SPIN FREELY WHILE 3. MAINTAINING THE DESIRED HEIGHT.
An important point after buying a device Havis PKG-PSM-142 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Havis PKG-PSM-142 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Havis PKG-PSM-142 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Havis PKG-PSM-142 you will learn all the available features of the product, as well as information on its operation. The information that you get Havis PKG-PSM-142 will certainly help you make a decision on the purchase.
If you already are a holder of Havis PKG-PSM-142, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Havis PKG-PSM-142.
However, one of the most important roles played by the user manual is to help in solving problems with Havis PKG-PSM-142. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Havis PKG-PSM-142 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
