Instruction/ maintenance manual of the product C-VS-1600-EXPL-1 Havis
Go to page of 8
C-VS- 1600-EXPL-1_INST_7-12.docx INSTALL INSTRUCTIONS C-VS-16 00-EXPL-1 16” VEHICLE S PECIFIC C ONSOLE for 2011 - 2015 Retail Model FORD EXPLOR ER with OE M Center Shifter TOOLS NEEDED: Phillips Scr.
C-VS- 1600-EXPL-1_INST_7-12.docx C-VS-1600-EXP L-1 (Main Housing Assembly) CM004239 Rear mount bracket (inside console) CM004236 Passenger side trim panel CM004248 Top / Forward Trim Bezel CM004237 Dr.
C-VS- 1600-EXPL-1_INST_7-12.docx Remove one (1) screw holdin g top / forward trim bezel. (7mm socket) Carefully remove / unsnap trim bezel and remove terrain management switch or accessory pocket. It helps to turn ignition on and move shift lever knob rearward.
C-VS- 1600-EXPL-1_INST_7-12.docx Shifter assembly is now removed and will be reused later. Using a flat screwdriver, carefull y pop off the shifter cable end from the linkage stud. Pop toward driver side. Passenger side / rear bolt shown. Passenger side / side bolt shown.
C-VS- 1600-EXPL-1_INST_7-12.docx Attach # CM004246 front shifter platform to hump bracket with four (4) 1/4 x 3/4 Hex h ead bolts, lock washers and flat washers. (7/16 wrench) Attach previously removed sensor onto # CM004239 rear mount bracket studs and 1/4 serrated nuts.
C-VS- 1600-EXPL-1_INST_7-12.docx Attach 1-7/8” diameter “O” ring to the OEM aux panel and snap into adaptor plate. Attach plate assembly to console forward bezel with #8 x 1/4" Phillips flat head screws. (2014 Standard Aux panel shown) Adaptor plate for 2014 Ford Retail Explorer.
C-VS- 1600-EXPL-1_INST_7-12.docx Remove side trim panel and place supplied # 10 speed nut onto drilled location. This provides a sturd y mount for trim screw. Same procedure on both sides. Before a ttachin g trim panels, you will need to slightly bend pointed part shown inward behind extrusion.
C-VS- 1600-EXPL-1_INST_7-12.docx Adjust position and tigh ten console housing to brackets. (7/16 w rench) This photo shows O .E.M. rear controls mounted in console. Four (4) 8/32 x 1/2” screws provided. Note: It is not necessary to use the controls if not desired.
An important point after buying a device Havis C-VS-1600-EXPL-1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Havis C-VS-1600-EXPL-1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Havis C-VS-1600-EXPL-1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Havis C-VS-1600-EXPL-1 you will learn all the available features of the product, as well as information on its operation. The information that you get Havis C-VS-1600-EXPL-1 will certainly help you make a decision on the purchase.
If you already are a holder of Havis C-VS-1600-EXPL-1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Havis C-VS-1600-EXPL-1.
However, one of the most important roles played by the user manual is to help in solving problems with Havis C-VS-1600-EXPL-1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Havis C-VS-1600-EXPL-1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
