Instruction/ maintenance manual of the product C-VS-1600-EXPL Havis
Go to page of 4
C-VS-1600-EX PL_INST_6-09.docx6 -09 INSTALL INSTRUCTIONS C-VS-1600-EXPL 16” VEHICL E SPEC IFIC CONSO LE 2006-201 0 FORD EXPLORER TOOLS NEEDED: Screw Driver Set Wire Cutters Wire Crimping tool Torx B.
C-VS-1600-EX PL_INST_6-09.docx6 -09 O.E.M. console prior to removal Carefully remove chrome trim bezel Remove O.E.M. cup holder assembly. (7mm) Remove rear side bolts, (10mm-Driver & Pass.) Remove front side bolts, (10mm-Driver & Pass.) Remove O.
C-VS-1600-EX PL_INST_6-09.docx6 -09 O.E.M. console completely removed Remove side panel (Driver & Pass) Unplug O.E.M. housing harness. Remove (2) passenger side floor bolts and harness clip. (10mm) Attach passenger side floor with O.E.M. bolts. (10mm w/ extension) Reattach harness clip.
C-VS-1600-EX PL_INST_6-09.docx6 -09 Attach rear of housing to O.E.M. bracket with O.E.M. bolts. (10mm) Push front of housing down and forward while attaching to the floor brackets with supplied ¼” x ¾” hex bo lts & washers. (Two each side) Reattach front trim panels Attach rear of housing to O.
An important point after buying a device Havis C-VS-1600-EXPL (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Havis C-VS-1600-EXPL yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Havis C-VS-1600-EXPL - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Havis C-VS-1600-EXPL you will learn all the available features of the product, as well as information on its operation. The information that you get Havis C-VS-1600-EXPL will certainly help you make a decision on the purchase.
If you already are a holder of Havis C-VS-1600-EXPL, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Havis C-VS-1600-EXPL.
However, one of the most important roles played by the user manual is to help in solving problems with Havis C-VS-1600-EXPL. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Havis C-VS-1600-EXPL along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
