Instruction/ maintenance manual of the product C-VS-0809-CHGR-1 Havis
Go to page of 4
C-VS- 0809-CHGR-1_INST_4-11 C-VS-0809-CHGR-1 (Assembly) INSTALL INSTRUCTION S C-VS-0809-CHGR-1 2011-201 3 Dodge Charger (Po lice Package) VEHICLE SP ECIFIC C ONSOLE With 17” inche s Equipme nt space.
C-VS- 0809-CHGR-1_INST_4-11 Remove O.E.M. plastic center console Remove Ignition proximity sensor / antenna from rear underside of O.E.M. console. (Phillips Screwdriver) ** SEE NOTE BELOW ** Remove sensor and 12 volt socket wire harness assembl y f rom under side of O.
C-VS- 0809-CHGR-1_INST_4-11 Cut off O.E.M 12 volt socket connectors and attach 1/4 spade connectors on O.E.M. wires. O.E.M. wire will need to be extended for rear socket. If desired, new heavier gauge wires can be installed instead of using O.E.M. wiring.
C-VS- 0809-CHGR-1_INST_4-11 A cover is provided to guard the O.E.M. Sensor on transmission hump. If desired, attach to existing stud and 6mm nut and washer provided. Completed console installation with La ptop / Docking Station (example 1) Console assembly complete with Docking Station.
An important point after buying a device Havis C-VS-0809-CHGR-1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Havis C-VS-0809-CHGR-1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Havis C-VS-0809-CHGR-1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Havis C-VS-0809-CHGR-1 you will learn all the available features of the product, as well as information on its operation. The information that you get Havis C-VS-0809-CHGR-1 will certainly help you make a decision on the purchase.
If you already are a holder of Havis C-VS-0809-CHGR-1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Havis C-VS-0809-CHGR-1.
However, one of the most important roles played by the user manual is to help in solving problems with Havis C-VS-0809-CHGR-1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Havis C-VS-0809-CHGR-1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
