Instruction/ maintenance manual of the product C-SM-SA Havis
Go to page of 5
C-SM_INST_ 9 -10 INSTALL INSTRUCTIONS C-SM SERIES ANGLED HEAVY DUTY CONS OLE & ACCESSORIES TOOLS REQUIRED: Standard socket set w/ 6”extension Metric socket set w/ 6” extension Standard wrench set Metric wrench set Torx bit set w/ driver Slide ¼” nuts into extrusion.
C-SM_INST_ 9 -10 Always! ¾ Read all instructions before inst alling any Havis, Inc. products. ¾ Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes! ¾ Use hardware provided with install kit SUB ASSEMBLY: 1. Install Tunnel Mount into vehicle.
C-SM_INST_ 9 -10 4. ATTACH PENTEX PRINTER BRACKE T: ( See Figure #4) • Printer bracket attaches to front side of console. • When mounted properly, printer housing will s lide toward passenger side seat. • Attach to Angled Heavy Duty consol e using supplied screws and Keps nuts.
SWING ARM PLASTIC WASHER COMES WITH C-MD-200 ASSEMBLY CM003105 C-MD-203 TOP REMOVED FOR CLARITY 5/16" BELLEVILLE WASHER GSM31091 5/16-24 CONICAL NUT GSM30160 5/16-24 JAM NUT GSM30070 1/4-20 X 1-1.
5/16-24 CONICAL NUT GSM30160 5/16" BELLEVILLE WASHER GSM31091 METAL PLATE CM003103-1 COMES WITH C-MD-200 ASSEMBLY PLASTIC WASHER CM003105 COMES WITH C-MD-200 ASSEMBLY C-MD-203 TOP REMOVED FOR CLA.
An important point after buying a device Havis C-SM-SA (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Havis C-SM-SA yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Havis C-SM-SA - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Havis C-SM-SA you will learn all the available features of the product, as well as information on its operation. The information that you get Havis C-SM-SA will certainly help you make a decision on the purchase.
If you already are a holder of Havis C-SM-SA, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Havis C-SM-SA.
However, one of the most important roles played by the user manual is to help in solving problems with Havis C-SM-SA. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Havis C-SM-SA along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
