Instruction/ maintenance manual of the product C-3090-4 Havis
Go to page of 4
INSTALLATION INSTRUCTIONS C- 3090’s & C - 3089’s COMPUTER LAPTOP MO UNT AND ACCESS ORIES TOOLS NEEDED: Ratcheting wrench Standard socket set Open-end wrench set Allen wrench set Screwdriver set Always! Read all instructions before installing any Havis, Inc.
C-3090_INST _6-09.docx6- 09 3. ADJUST C-3090 PLATFORM FOR SPECIFIC LAP TOP: The C-3090 will need to be adjusted to properly hold your particular laptop. Note: Do not adjust the latch on the underside of the laptop. Loosen the “L” clamps on the sides of the C-3090.
C-3090_INST _6-09.docx6- 09 Adjust “L” brackets to clamp the laptop firm. Release latch and test for strength. Adjust if nece ssar y. 4. PLATFORM WIDENING INSTRUCTIONS: ( Photo #5) On larger laptops, it may be necessary to use a different hole pattern on the plate.
C-3090_INST _6-09.docx6- 09 6. MOUNTING C-TMLOCK Photo #7 shows the C-TMLOCK option, which comes assembled from the factory if ordered with the C-3090. Remove 8-32 keps nuts that hold down OEM latch on laptop computer mount. Remove Pem studs from laptop computer mount and replace with Pem studs included with C-TMLOCK assembly.
An important point after buying a device Havis C-3090-4 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Havis C-3090-4 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Havis C-3090-4 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Havis C-3090-4 you will learn all the available features of the product, as well as information on its operation. The information that you get Havis C-3090-4 will certainly help you make a decision on the purchase.
If you already are a holder of Havis C-3090-4, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Havis C-3090-4.
However, one of the most important roles played by the user manual is to help in solving problems with Havis C-3090-4. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Havis C-3090-4 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
