Instruction/ maintenance manual of the product 10026 Hasselblad
Go to page of 93
503CWOMS.EPS 960807 COPYRIGHT © 1996 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 430 91 HÖNÖ tel/fax 031- 96 84 64 anders@aeillustr.se V ictor Hasselblad AB Göteborg Sweden Service Manual Copyright © 1998 by Victor Hasselblad AB.
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. Camera body 503CW Contents list Revision 1 May 1997 General Camera body 501C Camera body 503CXi Camera body 503CX Camera body 500C/M .
Related Service Infos Revision 4 January 2001 503CW - 501C - 503CX/CXi - 500C/M - 501CM 20/93 Flash metering circuit redesigned - 503CX 04/94 New camera - 501C 05/94 Exploded views and spare part specifications - 501C and 503CXi 06/94 Spare part No .
Related Service Infos Revision 4 January 2001 503CW - 501C - 503CX/CXi - 500C/M - 501CM 2. New CD-ROM - V ersion 2.0 04/01.
June 1998 Camera body 503CW General description 1:1 Revision 1 Camera type: Single lens reflex camera with 6 x 6 (2 1/4 x 2 1/4 in) max. film size. Interchangeable lenses, film magazines, viewfinders and focusing screens. Weight: 610 g. Lens mount: Hasselblad bayonet mount for CF and C lenses.
0 31 9 ° 300 280 260 240 220 200 18 0 16 0 14 0 12 0 10 0 80 60 40 20 0 20 40 60 80 10 0 12 0 14 0 16 0 18 0 200 220 240 260 280 300 320 340 360 ° 503DGRM1 961018 COPYRIGHT © 1996 ANDERS ENGSTR Ö M ANDERS ENGSTR Ö M, ILLUSTRAT Ö R Ö stra v ä gen 46 430 91 H Ö N Ö tel/fax 031- 96 84 64 anders@aeillustr.
T ools Camera body 503CW October 1996 Revision 0 T ool No . Description Used for 2:1 V-2200 Bender Signal arm adjustment V-2201 Bender Mirror arm adjustment V-2202 Bender S-arm adjustment V-2203 Bender Release arm adjustment (aux.
T ools Camera body 503CW October 1996 Revision 0 T ool No . Description Used for 2:2 V-5423 Riveting jig Replacement of aux. shutter flaps V-5942 Exp. gauge Release mechanism adjustment 902474 Test bo.
January 2001 Camera body 503CW Disassembly 3:1 Revision 1 Camera shell Remove the lens, film magazine, view finder, focusing screen and winding knob. Remove the screw (830060), coupling (22767) and washer (22799). Remove the leather (13374), shim (22473), screw (822701) and ISO selector knob (22495).
May 2000 Camera body 503CW Disassembly Revision 2 Circuit board (22575) *22882 C A UTION! When handling the circuit board a grounded bench mat and a wrist strap must be used to prevent ESD damage. Lift the chassis connector out of the hole in which it is seated in the left hand wall.
Camera body 503CW Disassembly October 1996 Revision 0 3:3 F ocusing screen frame (22812) Remove the two remaining screws (820015) holding the focusing screen frame to the right hand wall and lift the frame off. Right hand wall (21095-1) Remove (or cut) the foam plastic pad (22582) to get access to the three screws (820014).
DIS10.EPS Camera body 503CW Disassembly 3:4 May 2000 Revision 1 Remove the lower (13101) and the upper (13100) connecting rods and dismantle the remaining parts on the mechanism in the following order. Fig. 8. 1. Screws (820016) 2 pcs 2. Bearing bracket (13171) and nut (13116) 3.
DIS10.EPS Camera body 503CW Reassembly May 2000 Revision 1 4:1 The lubricants mentioned in the text are: Grease = Isoflex Topas L32 Oil = Isoflex PDP 48 Gear housing (30324) Lubricate carefully the washer (810840) with oil. Lubricate with grease and fit (incl.
Camera body 503CW Reassembly May 2000 Revision 2 4:2 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Gear alignment 13182 22699 14280 822605 Gear housing 13167 13171 13116 820016 Mount the gear housing (30324) to the mechanism plate.
Camera body 503CW Reassembly May 2000 Revision 1 4:3 Fitting the mechanism plate to the right hand wall On the mechanism plate fit the upper and lower connecting rods to the pins on the gear wheels. (13100) for the upper shutter and (13101) for the lower shutter.
Camera body 503CW Reassembly January 2001 Revision 1 4:4 Fig. 19 Fig. 20 Fig. 21 Fig. 22 13355 13362 13280 13356-1 816720 30727 Cover 22813 814827 13108 821631 Fit the stop lever (13355) and spring (816752) to the pre-greased hub. Secure with the clip (817119).
Camera body 503CW Reassembly October 1996 Revision 0 4:5 Rear plate (30300) Fitting the rear plate Fig. 23 and 24. Lubricate the shutter driving arm ’ s shaft hub and the mirror ’ s moving peg with grease. Connect the arm and the connecting rods and fix the rear plate into the chassis.
Camera body 503CW Reassembly October 1996 Revision 0 4:6 F ront plate (30777) Fitting the front bayonet plate to the camera body Tension the drive spring by turning the outer gear wheel clockwise four turns. The front key will be positioned at the red index dot.
Camera body 503CW Adjustment October 1996 Revision 0 5:1 The lubricants mentioned in the text are: Grease = Isoflex Topas L32 Oil = Isoflex PDP 48 Install the winding knob V-2206 and tension the auxiliary shutter spring (30384) by releasing the pawl (20919).
Camera body 503CW Adjustment October 1996 Revision 0 5:2 F ocal length The camera body ’ s focal length is inspected and adjusted by using tool V-2229. The focal length is 71.40 mm ± 0.03 mm. Zero the dial indicator by placing it on surface ” A ” .
Camera body 503CW Adjustment October 1996 Revision 0 5:3 Adjustment No. 1 (Overtravel) With the film winding mechanism tensioned, check the angle 15-16 o with the bayonet plate tool 904644 pushed hard against the stop arm (13355). Measure the angle with a spring tension of 300 gm/cm.
Camera body 503CW Adjustment October 1996 Revision 0 5:4 Adjustment of the release mechanism Check that the release bar (30375) is free from the signal arm pawl. Adjust by carefully bending the forward part of the signal arm. Use tool V-2200. Minimum free play: 0.
Camera body 503CW Adjustment October 1996 Revision 0 5:5 The push rod (22369) is adjusted so that it is set 0.15 mm below the release bar (30375) forward angle setting. Check by using the tool V-5942. Adjust by gently bending (22369). Fig. 37. Position tool V-5942 as shown and press against the front plate.
Camera body 503CW Adjustment October 1996 Revision 0 5:6 Adjustment of the release sequence Make sure the winding knob V-2206 and the bayonet plate tool 904644 are installed. Release the camera and keep it released by holding the release bar and push rod back.
Camera body 503CW Adjustment October 1996 Revision 0 5:7 Operate the winding knob V-2206 to cock the shutter. Check that the bayonet plate tool 904644 is blocked by the stop lever (22769) when the camera is completely cocked. Adjust by bending the front of the lever.
Camera body 503CW Adjustment May 2000 Revision 3 Fitting the Circuit board (22575) *22882 C A UTION! When handling the circuit board a grounded bench mat and a wrist strap must be used to prevent ESD damage. Put the insulating plate (22746) in position and place the circuit board on top of it.
Camera body 503CW Adjustment January 2001 Revision 1 5:9 Adjust the lower rear plate/shell alignment and tighten the two rear screws (829755)and seal with loctite. Fit and tighten the two front screws (820781). Check the upper edge alignment of rear plate and shell.
Camera body 503CW Adjustment January 2001 Revision 1 Check the mirror 45 o angle using the sighting tube which fits in the holder on the gauge. Tighten the locking screw. Shine a light source towards the oval cut-out in the upper part of the tube so that the white ring of the ocular is illuminated.
Camera body 503CW Adjustment October 1996 Revision 0 5:11 Check the camera functions. Check that the auxiliary shutter is clear of the internal covers. Check the release sequence using a micrometer V-2354. Mount the micrometer in the exposure button ’ s cable release socket.
Camera body 503CW Adjustment June 1998 Revision 1 5:12 Calibration and control of the flash metering system TTL Control/calibration should be carried out each time the camera has been in for repair. The tolerance for the flash meter is ±0.3 EV at all settings.
Camera body 503CW Adjustment June 1998 Revision 1 Calibration On pressing the MEASURE button one of the three LED ´ s will light. The variable resistor in the camera (access behind the leather beside the ISO dial) should be turned so that the green LED lights when the MEASURE button is pressed again.
Camera body 503CW October 1996 Revision 0 6:1 F ront bayonet plate F ront plate reassembly Fit the four bayonet tongues (103439) and secure with eight screws (820425).
Camera body 503CW October 1996 Revision 0 6:2 The hole for the locating pin (812202) is bored with 1.15 mm drill. Use tool V-2211 for driving in the pin.
Camera body 503CW October 1996 Revision 0 6:3 A uxillary shutter & Mirror Exchanging the mirror (22775) Release the camera. Inside the mirror box, remove the clip "A" and disengage the arm (22781) from the mirror frame. Remove the washer (810649) located behind the arm and the frame.
Camera body 503CW October 1996 Revision 0 6:4 Remount the mirror frame and the upper shutter flap by holding the frame in position and aligning the upper shutter flap to the bearing holes. Push in both bearing hubs and centralise the mirror and shutter flap side movement by using shim washers.
BOD50301.EPS 970512 COPYRIGHT © 1997 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 430 91 HÖNÖ tel/fax 031- 96 84 64 anders@aeillustr.
Description Pos No. Pcs Spare Part No. Remark Camera body 503CW 7 June 1998 Revision 2 1 1 40 393 Shell, complete (chrome) Part No. 40394 (black) 2 1 30 762 Support, right 3 1 105 872 Tape 4 1 30 760 .
BOD50302.E P 00050 COPYRIGHT ANDERS ENGSTR 430 91 H tel/fax 031- anders@aeillustr.se Camera body 503CW 8 May 2000 Revision 2 2 4 3 5 6 7 8 9 12 16 17 18 19 20 21 22 1 10 11 13 15 23 24 25 26 27 28 29 .
Description Pos No. Pcs Spare Part No. Remark Camera body 503CW 8 May 2000 Revision 2 1 1 30 324 Gear housing Complete 2 1 830 060 Screw 3 1 820 415 Screw 4 1 22 767 Coupling 5 1 22 799 Washer Alterna.
BOD50303.EPS 970515 COPYRIGHT © 1997 ANDERS ENGSTR Ö M ANDERS ENGSTR Ö M, ILLUSTRAT Ö R Ö stra v ä gen 46 430 91 H Ö N Ö tel/fax 031- 96 84 64 anders@aeillustr.
Description Pos No. Pcs Spare Part No. Remark Camera body 503CW 9 May 1997 Revision 1 1 1 822 605 Screw 2 1 810 836 Washer 3 1 22 287 Damping ring 4 1 14 280 Lid 5 1 14 278 O-ring 6 1 30 384 Spring 7 1 22 699 Gear 8 1 810 953 Washer (0.3 mm) 9 1 820 015 Screw 10 1 823 015 Screw 11 1 21 125 Mechanism plate 12 1 13 182 Gear 13 1 810 404 Washer (0.
BOD50304.EPS 990906 COPYRIGHT © 1999 ANDERS ENGSTR Ö M ANDERS ENGSTR Ö M, ILLUSTRAT Ö R Ö stra v ä gen 46 430 91 H Ö N Ö tel/fax 031- 96 84 64 anders@aeillustr.
Description Pos No. Pcs Spare Part No. Remark Camera body 503CW 10 September 1999 Revision 1 1 1 30 300 Rear plate, complete State serial No. 2 1 40 237 Rear plate State serial No. 3 1 816 805 Spring 4 1 816 804 Spring 5 1 13 125 Light trap 6 2 821 203 Screw 7 2 13 397 Foam plastic strip 8 4 810503 Washer (0.
BOD50305.EPS 990906 COPYRIGHT © 1999 ANDERS ENGSTR Ö M ANDERS ENGSTR Ö M, ILLUSTRAT Ö R Ö stra v ä gen 46 430 91 H Ö N Ö tel/fax 031- 96 84 64 anders@aeillustr.
Description Pos No. Pcs Spare Part No. Remark Camera body 503CW 11 September 1999 Revision 2 1 1 30 777 Front bayonet plate Complete 2 1 40 403 Front bayonet plate 3 1 30 383 Front gear 4 1 30 386 Gov.
BOD50306.EPS 990906 COPYRIGHT © 1999 ANDERS ENGSTR Ö M ANDERS ENGSTR Ö M, ILLUSTRAT Ö R Ö stra v ä gen 46 430 91 H Ö N Ö tel/fax 031- 96 84 64 anders@aeillustr.
Description Pos No. Pcs Spare Part No. Remark Camera body 503CW 12 September 1999 Revision 1 1 1 30 686 Bottom plate 2 1 30 375 Release bar 3 1 814 512 Spring 4 1 22 717 Signal arm 5 1 814 603 Spring .
BOD50307.EPS 960806 COPYRIGHT © 1996 ANDERS ENGSTR Ö M ANDERS ENGSTR Ö M, ILLUSTRAT Ö R Ö stra v ä gen 46 430 91 H Ö N Ö tel/fax 031- 96 84 64 anders@aeillustr.
Description Pos No. Pcs Spare Part No. Remark Camera body 503CW 13 May 2000 Revision 2 1 1 22 577 Clip 2 1 22576 Bracket 3 2 823 335 Screw 4 1 22 470 Socket cap 5 1 22 575 PC board See below 6 1 22 74.
BOD50308.EPS 960710 COPYRIGHT © 1996 ANDERS ENGSTR Ö M ANDERS ENGSTR Ö M, ILLUSTRAT Ö R Ö stra v ä gen 46 430 91 H Ö N Ö tel/fax 031- 96 84 64 anders@aeillustr.
Description Pos No. Pcs Spare Part No. Remark Camera body 503CW 14 October 1996 Revision 0 1 2 103 517 Leather 2 1 815 904 Spring 3 1 815 707 Spring 4 1 103 516 Washer 5 1 103 113 Crank bayonet 6 1 10.
BOD50101.EPS 970515 COPYRIGHT © 1997 ANDERS ENGSTR Ö M ANDERS ENGSTR Ö M, ILLUSTRAT Ö R Ö stra v ä gen 46 430 91 H Ö N Ö tel/fax 031- 96 84 64 anders@aeillustr.
Description Pos No. Pcs Spare Part No. Remark Camera body 501C 15:1 October 1996 Revision 0 1 1 40 384 Shell, complete 2 2 22 782 Name plate 3 1 103 592 Leather 4 1 103 529 Accessory rail Spare parts .
501CM02.EPS 970514 COPYRIGHT © 1997 ANDERS ENGSTR Ö M ANDERS ENGSTR Ö M, ILLUSTRAT Ö R Ö stra v ä gen 46 430 91 H Ö N Ö tel/fax 031- 96 84 64 anders@aeillustr.
Description Pos No. Pcs Spare Part No. Remark Camera body 501C 15:2 May 1997 Revision 1 Spare parts not listed are the same as for 503CW 1 1 13 355 Stop lever 2 1 22 799 Washer Alternatively none or 1 pc 3 1 412 401 Spacer 4 1 830 061 Screw 5 1 412 103 Coupling New type of winding crank from camera serial No.
BOD50102.EPS 961022 COPYRIGHT © 1996 ANDERS ENGSTR Ö M ANDERS ENGSTR Ö M, ILLUSTRAT Ö R Ö stra v ä gen 46 430 91 H Ö N Ö tel/fax 031- 96 84 64 anders@aeillustr.
Description Pos No. Pcs Spare Part No. Remark Camera body 501C 15:3 May 1997 Revision 1 Spare parts not listed are the same as for 503CW -3 1 1 30 519 Rear plate, complete State serial No.
BOD50103.EPS 000530 COPYRIGHT ' 2000 ANDERS ENGSTR M ANDERS ENGSTR M, ILLUSTRAT R stra v gen 46 430 91 H N tel/fax 031- 96 84 64 anders@aeillustr.
Description Pos No. Pcs Spare Part No. Remark Camera body 501C 15:4 May 2000 Revision 3 1 1 22 422 Foam plastic strip 2 1 20 959 Inner wall, left 3 1 22 580 Reflection protector 4 1 22 598 Cover 5 1 21 611 Frame, complete Incl.
BOD50104.EPS 970512 COPYRIGHT © 1997 ANDERS ENGSTR Ö M ANDERS ENGSTR Ö M, ILLUSTRAT Ö R Ö stra v ä gen 46 430 91 H Ö N Ö tel/fax 031- 96 84 64 anders@aeillustr.
Description Pos No. Pcs Spare Part No. Remark Camera body 501C 15:5 May 1997 Revision 1 1 1 22 750 Coupling 2 1 22 751 Crank support Spare parts not listed are the same as for 503CW.
503CXi01.EPS 961029 COPYRIGHT © 1996 ANDERS ENGSTR Ö M ANDERS ENGSTR Ö M, ILLUSTRAT Ö R Ö stra v ä gen 46 430 91 H Ö N Ö tel/fax 031- 96 84 64 anders@aeillustr.
Description Pos No. Pcs Spare Part No. Remark Camera body 503CXi 16:1 October 1996 Revision 0 Spare parts not listed are the same as for 503CW 1 2 22 771 Name plate.
BOD50102.EPS 961022 COPYRIGHT © 1996 ANDERS ENGSTR Ö M ANDERS ENGSTR Ö M, ILLUSTRAT Ö R Ö stra v ä gen 46 430 91 H Ö N Ö tel/fax 031- 96 84 64 anders@aeillustr.
Description Pos No. Pcs Spare Part No. Remark Camera body 503CXi 16:2 October 1996 Revision 0 Spare parts not listed are the same as for 503CW 1 1 30 519 Rear plate, complete State serial No.
503CXi03.EPS 000530 COPYRIGHT ' 2000 ANDERS ENGSTR M ANDERS ENGSTR M, ILLUSTRAT R stra v gen 46 430 91 H N tel/fax 031- 96 84 64 anders@aeillustr.
Description Pos No. Pcs Spare Part No. Remark Camera body 503CXi 16:3 May 2000 Revision 2 1 1 22 422 Foam plastic strip 2 1 20 959 Inner wall, left 3 1 22 580 Reflection protector 4 1 22 598 Cover 5 1 21 611 Frame, complete Incl.
503CX01.EPS 961029 COPYRIGHT © 1996 ANDERS ENGSTR Ö M ANDERS ENGSTR Ö M, ILLUSTRAT Ö R Ö stra v ä gen 46 430 91 H Ö N Ö tel/fax 031- 96 84 64 anders@aeillustr.
Description Pos No. Pcs Spare Part No. Remark Camera body 503CX 17:1 October 1996 Revision 0 1 1 40 346 Shell, complete (chrome) Part No. 40347 (black) 2 1 103 506 Leather 3 1 103 327 Support 4 1 103 .
503CX02.EPS 961025 COPYRIGHT © 1996 ANDERS ENGSTR Ö M ANDERS ENGSTR Ö M, ILLUSTRAT Ö R Ö stra v ä gen 46 430 91 H Ö N Ö tel/fax 031- 96 84 64 anders@aeillustr.
Description Pos No. Pcs Spare Part No. Remark Camera body 503CX 17:2 October 1996 Revision 0 Spare parts not listed are the same as for 503CW 1 1 821 806 Screw 2 1 13 436 Locking washer 3 1 13 163 Bayonet plate 4 1 13 360 Shim, 0.2 mm For adjustment 13360-01, 0.
BOD50102.EPS 961022 COPYRIGHT © 1996 ANDERS ENGSTR Ö M ANDERS ENGSTR Ö M, ILLUSTRAT Ö R Ö stra v ä gen 46 430 91 H Ö N Ö tel/fax 031- 96 84 64 anders@aeillustr.
Description Pos No. Pcs Spare Part No. Remark Camera body 503CX 17:3 October 1996 Revision 0 Spare parts not listed are the same as for 503CW 1 1 30 519 Rear plate, complete State serial No.
503CX03.EPS 000530 COPYRIGHT ' 2000 ANDERS ENGSTR M ANDERS ENGSTR M, ILLUSTRAT R stra v gen 46 430 91 H N tel/fax 031- 96 84 64 anders@aeillustr.se 17:4 Camera body 503CX May 2000 Revision 2 1 2 .
Description Pos No. Pcs Spare Part No. Remark Camera body 503CX 17:4 May 2000 Revision 2 1 1 22 422 Foam plastic strip 2 1 20 959 Inner wall, left 3 1 22 580 Reflection protector 4 1 22 598 Cover 5 1 21 611 Frame, complete Incl.
COPYRIGHT © 1994 ANDERS ENGSTR Ö M ANDERS ENGSTR Ö M, ILLUSTRAT Ö R Ö stra v ä gen 46 430 91 H Ö N Ö TEL / FAX 031- 96 84 64 503CX04.EPS 961031 Camera body 503CX 17:5 October 1996 Revision 0 1.
Description Pos No. Pcs Spare Part No. Remark Camera body 503CX 17:5 October 1996 Revision 0 1 1 402 411 Catch 2 1 402 412 Spring 3 1 402 414 Bayonet plate 4 4 824 602 Screw 5 1 402 321 Crank support .
500CM01.EPS 961029 COPYRIGHT © 1996 ANDERS ENGSTR Ö M ANDERS ENGSTR Ö M, ILLUSTRAT Ö R Ö stra v ä gen 46 430 91 H Ö N Ö tel/fax 031- 96 84 64 anders@aeillustr.
Description Pos No. Pcs Spare Part No. Remark Camera body 500C/M (Classic) 18:1 October 1996 Revision 0 1 1 40 309 Shell, complete (chrome) Part No. 40308 (black) 2 1 103 506 Leather 3 1 103 327 Suppo.
503CX02.EPS 961025 COPYRIGHT © 1996 ANDERS ENGSTR Ö M ANDERS ENGSTR Ö M, ILLUSTRAT Ö R Ö stra v ä gen 46 430 91 H Ö N Ö tel/fax 031- 96 84 64 anders@aeillustr.
Description Pos No. Pcs Spare Part No. Remark Camera body 500C/M (Classic) 18:2 October 1996 Revision 0 Spare parts not listed are the same as for 503CW 1 1 821 806 Screw 2 1 13 436 Locking washer 3 1 13 163 Bayonet plate 4 1 13 360 Shim, 0.2 mm For adjustment 13360-01, 0.
BOD50102.EPS 961022 COPYRIGHT © 1996 ANDERS ENGSTR Ö M ANDERS ENGSTR Ö M, ILLUSTRAT Ö R Ö stra v ä gen 46 430 91 H Ö N Ö tel/fax 031- 96 84 64 anders@aeillustr.
Description Pos No. Pcs Spare Part No. Remark Camera body 500C/M (Classic) 18:3 October 1996 Revision 0 Spare parts not listed are the same as for 503CW 1 1 30 519 Rear plate, complete State serial No.
500CM02.EPS 000530 COPYRIGHT ' 2000 ANDERS ENGSTR M ANDERS ENGSTR M, ILLUSTRAT R stra v gen 46 430 91 H N tel/fax 031- 96 84 64 anders@aeillustr.se 18:4 Camera body 500C/M (Classic) May 2000 Revi.
Description Pos No. Pcs Spare Part No. Remark 18:4 Camera body 500C/M (Classic) May 2000 Revision 2 Spare parts not listed are the same as for 503CW -01 1 1 22 422 Foam plastic strip 2 1 20 959 Inner wall, left 3 1 22 580 Reflection protector 4 1 22 598 Cover 5 1 21 611 Frame, complete Incl.
COPYRIGHT © 1994 ANDERS ENGSTR Ö M ANDERS ENGSTR Ö M, ILLUSTRAT Ö R Ö stra v ä gen 46 430 91 H Ö N Ö TEL / FAX 031- 96 84 64 503CX04.EPS 961031 Camera body 500C/M (Classic) 18:5 October 1996 R.
Description Pos No. Pcs Spare Part No. Remark Camera body 500C/M (Classic) 18:5 January 2001 Revision 1 1 1 402 411 Catch 2 1 402 412 Spring 3 1 402 414 Bayonet plate 4 4 824 602 Screw 5 1 402 321 Cra.
501CM01.EPS 970513 COPYRIGHT © 1997 ANDERS ENGSTR Ö M ANDERS ENGSTR Ö M, ILLUSTRAT Ö R Ö stra v ä gen 46 430 91 H Ö N Ö tel/fax 031- 96 84 64 anders@aeillustr.
Description Pos No. Pcs Spare Part No. Remark Camera body 501CM 19:1 October 1997 Revision 1 Spare parts not listed are the same as for 503CW 1 1 40 407 Shell, complete (Chrome) Part No.
501CM02.EP 00050 9 COPYRIGHT ANDERS ENGSTR 430 91 H tel/fax 031- anders@aeillustr.se Camera body 501CM 19:2 May 2000 Revision 1 4 3 2 5 1.
Description Pos No. Pcs Spare Part No. Remark Camera body 501CM 19:2 May 1997 Revision 0 Spare parts not listed are the same as for 503CW 1 1 13 355 Stop lever 2 1 22 799 Washer Alternatively none or .
501CM03.EPS 990906 COPYRIGHT © 1999 ANDERS ENGSTR Ö M ANDERS ENGSTR Ö M, ILLUSTRAT Ö R Ö stra v ä gen 46 430 91 H Ö N Ö tel/fax 031- 96 84 64 anders@aeillustr.
Description Pos No. Pcs Spare Part No. Remark Camera body 501CM 19:3 September 1999 Revision 1 Spare parts not listed are the same as for 503CW 1 2 22 865 Light shield 2 1 22 806 Frame, complete 3 1 22 873 Reflection protector 4 1 22 892 Cover Incl.
An important point after buying a device Hasselblad 10026 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hasselblad 10026 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hasselblad 10026 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hasselblad 10026 you will learn all the available features of the product, as well as information on its operation. The information that you get Hasselblad 10026 will certainly help you make a decision on the purchase.
If you already are a holder of Hasselblad 10026, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hasselblad 10026.
However, one of the most important roles played by the user manual is to help in solving problems with Hasselblad 10026. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hasselblad 10026 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
