Instruction/ maintenance manual of the product SYTF2 American Power Conversion
Go to page of 17
990-7820D, July 2003 APC S tep-Down T ransformer Models: AP9621, SUR T005, SUR T006, SUTF3, SYTF2, SYTF2J, SYTF3 and SYTF3J User ’ s Manual English.
.
T ABLE OF C ONTENT S APC Contact Numbers and Support Visit the APC Web site for contact numbers and support at http://www.apc.com/suppor t . Chapter 1: Safety and General Information ................................................................. 1 Save These Instructions .
T ABLE OF C ONTENT S.
C HAPTER 1: S AFETY AND G ENERAL I NFORMA TION 1 Save These Instructions Conventions Used in this Manual The WARNING sign denotes a serious haza rd. It calls attention to a procedure, practice, condition, or the like, which, if not correctly performed or adhered to, could result in injury to personnel.
C HAPTER 1: S AFETY AND G ENERAL I NFORMA TION 2 De-energizing Safety To de-energize this equipme nt toggle the rear input circuit breaker to the OFF position, an d then disconnect the equipment from the AC po wer outlet. Electrical Safety • The protective earth conductor carries the leakag e current from the load devices (comput er equipment).
C HAPTER 1: S AFETY AND G ENERAL I NFORMA TION 3 Life Support Policy Limited W arrant y Copyright and T r ademark Information As a general policy, American Power Conversion (APC) does not recomme nd t.
C HAPTER 1: S AFETY AND G ENERAL I NFORMA TION 4.
C HAPTER 3: I NST ALLA TION 5 About Y our Step-Down T ransformer Table 1: System Configurations and Model Number s * Power cord connected units have an available p ower of 4500 VA with a L6-30 plug. ** Units with an available po wer of 5000 VA must be hardwired du e to input current.
C HAPTER 3: I NST ALLA TION 6 Product Overview.
C HAPTER 3: I NST ALLA TION 7 Front View Component Identification Figure 2: AP9621 Figure 3: SUTF3 / SYT F2 / SYTF2J / SYTF3 / SYTF3J Figure 4: SURT005/ SURT006 Rear View Component Identification Figu.
C HAPTER 3: I NST ALLA TION 8 Unp acking Inspection Contents Inst alling the S tep-Down T ransformer Installing in a Four-Post Rack Figure 8: AP9621 / SURT005 / SURT006 Figure 9: SUTF3 / SYTF2 / SYTF2J / SYTF3 / SYTF3J 1. Install the mounting rails using the instructions contai ned in the Rail Kit.
C HAPTER 3: I NST ALLA TION 9 Wiring the Step-Down Transformer 1. For cord connected installations, plug the inp ut power cord into the outlet . 2. For hardwired installations: • Verify that all branch circuit (mains) are de-energized an d locked out before installing cables or making connections.
C HAPTER 3: I NST ALLA TION 10 Connecting Load Equipment Plug all load equipment int o PDU receptacles. • For AP9621, SYTF2, SYTF2J, SURT 005, and SURT006 models, the receptacles are divided into 4 gr oups; each group is protected by a 15-am p circuit breaker.
C HAPTER 3: I NST ALLA TION 11 Using the Step-Down Transformer • Connect the Step-Down Transformer to a UPS for continuous po wer during a utility power failure. • The transformer has an efficiency of 90%. This requires 550 0 VA for a 5000 VA load, 5000 VA for a 4500 VA load, and 3900 VA for a 3500 VA load.
C HAPTER 4: S PECIF ICA TIONS 12 Product S pecifications Electrical Specifications AP9621 / SUTF3 / SYTF2 / SYTF3 / SURT005 SYTF2J / SYTF3J / SURT006 Nominal Input Voltage (VAC) 208 200 Input Voltage .
C HAPTER 4: S PECIF ICA TIONS 13 Other Specifications Dimensions (H x W x D) (Overall) 3.5 in x 19 in x 26 in ( with bezel) (8.9 cm x 48.3 cm x 66 cm) Weight Net Shipping 95 lbs (43kg) 110 lbs (50 kg).
An important point after buying a device American Power Conversion SYTF2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought American Power Conversion SYTF2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data American Power Conversion SYTF2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, American Power Conversion SYTF2 you will learn all the available features of the product, as well as information on its operation. The information that you get American Power Conversion SYTF2 will certainly help you make a decision on the purchase.
If you already are a holder of American Power Conversion SYTF2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime American Power Conversion SYTF2.
However, one of the most important roles played by the user manual is to help in solving problems with American Power Conversion SYTF2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device American Power Conversion SYTF2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
