Instruction/ maintenance manual of the product AL001 Harmar Mobility
Go to page of 10
your AL001.
AL001 Users Manual Harmar Mobility Rev .1 June 2008 Please r ead the manual befor e using . WARNING! A" warning" indicates" a" potentially" dangerous situation," which" if" not" avoided," could" result" in" death or" serious" injury .
9. Do not put the product on any kinds of trailers. 10. Carrying capacity is limited to 500 lbs. max. Assembly Instructions Tools Need: 5/8” wrench 1/2” wrench 3/4” wrench 9/16” wrench Phillips screwdriver Step.1 Insert the hitch into the carrier rack.
Step.3 Screw spring pull pin into carrier. Add reflectors. See the figure. Step.4 Screw spring pull pin into jam nut. Screw spring pull pin into ramp bracket. Bolt bracket to frame. Secure with nuts and lock washers. See the figure. NOTE! To prevent loosening of the spring pull pin, torque the jam nut tightly against the ramp bracket.
Insert the spring pull pin into the hole on the ramp when you stand the ramp. See the figure. ATTENTION! For the first installation of the anti-tilt lock bracket insert the carrier into the hitch receiver.
Next loosen the bolts on the anti-tilt lock bracket. (There should be grooves where the bolts were tightened against the hitch receiver) This procedure is required only during the initial installation of the anti-tilt lock bracket as fo r t he grooves will ensure repeated reloc ating of t he anti-ti lt lock b racket.
ATTENTION: Large chain loops on trailer hitches will not accept the anti-tilt locking device. In this case you will be unable to use the supplied anti-tilt locking devise.
Assembly.
Parts List Index Description Quantity 1 ramp 1 2 ramp bolt sets 2 3 Carriage bolt sets 2 4 Ramp bracket 1 5 Spring pull pin 2 6 reflector 2 7 carrier tray 1 8 gear 1 9 hitch pin 1 10 M12x70 bolt 1 11 .
YOU MUST HAND W ASH OR USE A TOUCHLESS AUTOMA TIC CAR W ASH TO PREVENT LIFT DAMAGE. IF YOU HA VE ANY QUESTIONS REGARDING W ASHING A CAR EQUIPPED WITH A HARMAR LIFT PLEASE CALL THE HARMAR TECHNINCAL SE.
An important point after buying a device Harmar Mobility AL001 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harmar Mobility AL001 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harmar Mobility AL001 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harmar Mobility AL001 you will learn all the available features of the product, as well as information on its operation. The information that you get Harmar Mobility AL001 will certainly help you make a decision on the purchase.
If you already are a holder of Harmar Mobility AL001, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harmar Mobility AL001.
However, one of the most important roles played by the user manual is to help in solving problems with Harmar Mobility AL001. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harmar Mobility AL001 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
