Instruction/ maintenance manual of the product SB 30 Harman-Kardon
Go to page of 15
Mul tic han ne l a ctiv e sou ndb ar sp eak er sy ste m SB 30 Owner’s Manual.
2 S B 3 0 Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with a dry cloth. 7. Do not block any ventilation openings.
3 S B 3 0 Introduction, Description and Features, and Included Items Introduction Thank you for purchasing the Harman Kardon SB 30 multichannel active soundbar speaker system, with which you’re about to begin many years of listening enjo yment.
4 S B 3 0 Connections and Controls Coaxial Digital Input connector: If your TV , disc player or cable/satellite tuner has a coaxial digital output, use a coaxial digital audio cable (not supplied) to connect it here.
5 S B 3 0 Connections and Controls Soundbar T op-Panel Controls Power Button and Power LED Surround Mode Button Volume Down/Up Buttons Source Selector Button Dolby Volume Button Power button: When the soundbar is in the Standby mode (the Power LED is amber), pressing the Power button will turn on the soundbar .
6 S B 3 0 Connections and Controls Power LED (on top of unit): The Power LED’s color indicates the subwoofer’ s opera tional status: • Blue: The subwoofer is operational. • Amber: The subwoofer is in the Standby mode. • Off: The subwoofer is turned off.
7 S B 3 0 Remote Control Functions Mute Button Power Button Volume Down Button Volume Up Button Surround Mode Button Dolby Volume Button Room Size Button Source Selector Button Mute button: Press this button to mute the system (the soundbar Power LED will flash blue); press again to unmute the system.
8 S B 3 0 Placing the Soundbar and Subwoofer and Connecting the System 5. After making all of the connections described in Connecting the System, on this page, attach the soundbar to the brackets by sliding the slots in its feet onto the brackets’ vertical tabs.
9 S B 3 0 Connecting and Using Y our Soundbar Speaker System Power Connections After you have made and verified all of the source connections and the V oltage Selector switch setting: 1. Connect the supplied AC po wer cord to the SB 30 CNTR’ s P o wer Cord connector and to a working unswitched wall outlet.
10 S B 3 0 Using Y our Soundbar Speaker System Wireless Code Switches In the unlikely event that you encounter interference when operating the system, or if you have more than one SB 30 system in operation, you may change the channel at which the wireless system opera tes.
11 S B 3 0 Subwoofer Phase Switch When the subwoofer is properly in phase with the soundbar speakers, the sound will be clearer and have more impact. In-phase performance will make percussive sounds like drums, piano and plucked strings sound more lifelike.
12 S B 3 0 Stereo: The Stereo mode reproduces the input signal in conventional two-channel stereo, utilizing the soundbar’ s left and right speakers. Digital equalization and digital crossover filters help achieve accurate performance for listeners in a variety of seating positions, not just those directly on the speaker’ s center line.
13 S B 3 0 Specifications Specifications SB 30 System Frequenc y response: 40Hz – 20kHz SB 30 CNTR Soundbar Low-frequency transducers: Six x 2" (51mm) cones High-frequency transducers: Seven x .
14 S B 3 0 T roubleshooting If your SB 30 system isn’t performing the way you think it should, check to see if the problem is covered in this section before calling your dealer or contacting a Harman Kardon representative.
HARMAN Consumer, Inc. 8500 Balboa Boulevard, Northridge, CA 91329 USA © 2011 HARMAN International Industries, Incorporated. All rights reserved. Harman Kardon is a trademark of HARMAN International Industries, Incorporated, registered in the United States and/or other countries.
An important point after buying a device Harman-Kardon SB 30 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harman-Kardon SB 30 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harman-Kardon SB 30 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harman-Kardon SB 30 you will learn all the available features of the product, as well as information on its operation. The information that you get Harman-Kardon SB 30 will certainly help you make a decision on the purchase.
If you already are a holder of Harman-Kardon SB 30, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harman-Kardon SB 30.
However, one of the most important roles played by the user manual is to help in solving problems with Harman-Kardon SB 30. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harman-Kardon SB 30 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
