Instruction/ maintenance manual of the product SB 16 Harman-Kardon
Go to page of 14
Active speaker soundbar SB 16 Owner’s Manual.
SB 16 2 T able of Contents INTRODUCTION 3 DESCRIPTION AND FEA TURES 3 INCLUDED ITEMS 3 SOUNDBAR TOP-P ANEL CONTROLS 4 SOUNDBAR REAR-P ANEL CONTROLS AND CONNECTIONS 4 SUBWOOFER REAR-P ANEL CONTROLS 5 S.
Introduction, Description and Features, Included Items 3 SB 16 Introduction Please register your product on our Web site at www .harmankardon.com. Note: Y ou’ll need the product’s serial number . At the same time, you can choose to be notified about our new products and/or special promotions.
Soundbar T op-Panel Controls and Soundbar Rear -Panel Controls and Connections SB 16 4 Power Button Surround Mode Button Volume Up/Down Buttons Source Selector Button EQ Switch T rim Switch Source 2 (.
SB 16 5 Subwoofer Rear -Panel Connections Subwoofer Rear -Panel Controls Crossover Knob: This knob adjusts the subwoofer’ s crossover between 50Hz and 150Hz. The higher you set the Crossover knob, the higher in frequency the subwoofer will operate and the more its bass will “overlap” that of the soundbar .
Speaker Placement SB 16 6 Speaker Placement Placing the Soundbar on a T able If your TV is placed on a table, you can place the soundbar on the table directly in front of the TV stand, centered with the TV screen. Attach the supplied rubber feet to the soundbar as shown in the illustration.
7 Connections SB 16 Connections Source Connections Analog: Use the supplied stereo audio cable to connect the soundbar’ s Source 1 (analog) input to your TV’s stereo audio output. If your TV has two sets of audio output jacks, use the set that has a fixed (not variable) output level.
Connections SB 16 8 Power Connections After you have made and verified all of the source connections above: 1. Connect the DC power supply to the soundbar’ s po wer connection. Then plug the supplied AC cord into the DC power supply and into an active, unswitched AC outlet.
Operation 9 SB 16 Operation Set the soundbar’ s and subwoofer’ s Power switches in their On positions. T urning the Soundbar On and Off Manually: T o turn the soundbar on manually , momentarily press the soundbar’ s P ower button. T o put the soundbar into Standby manually , hold the P o wer button for at least three seconds.
Operation SB 16 10 Subwoofer Volume Knob Use the subwoofer’ s V olume knob to balance the bass with the rest of the sound. Play music or movies that you are familiar with and adjust the subwoofer’ s Volume knob so the bass sounds balanced on both music and films.
11 SB 16 Programming the Soundbar to Respond to Y our TV Remote Programming the Soundbar to Respond to Y our TV Remote Y ou can program the soundbar so it will respond to your TV remote’ s power off, mute, volume up, volume down and source commands.
12 SB 16 T roubleshooting 12 T roubleshooting If your SB 16 system isn’t performing the way you think it should, check to see if the problem is covered in this section before calling your dealer or contacting a harman kardon representative.
Specifications 13 SB 16 SB 16 System Frequenc y response 50Hz – 20kHz SB 16 CTR Soundbar Midrange transducers T wo x 3" (75mm) cones per channel, video-shielded High-frequency transducer One x 3/4" dome per channel, video-shielded Amplifier power 25 watts x 2 Power requirement 24V DC, 2.
HARMAN Consumer, Inc. 8500 Balboa Boulevard, Northridge, CA 91329 USA 516.255.4545 (USA only) Made in P.R.C. © 2010 HARMAN International Industries, Incorporated. All rights reserved. harman kardon is a trademark of HARMAN International Industries, Incorporated, registered in the United States and/or other countries.
An important point after buying a device Harman-Kardon SB 16 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harman-Kardon SB 16 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harman-Kardon SB 16 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harman-Kardon SB 16 you will learn all the available features of the product, as well as information on its operation. The information that you get Harman-Kardon SB 16 will certainly help you make a decision on the purchase.
If you already are a holder of Harman-Kardon SB 16, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harman-Kardon SB 16.
However, one of the most important roles played by the user manual is to help in solving problems with Harman-Kardon SB 16. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harman-Kardon SB 16 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
