Instruction/ maintenance manual of the product DRILL MASTER 67031 Harbor Freight Tools
Go to page of 8
3–5 HOUR, 18 VOL T , BA TTER Y P ACK CHARGER 67031 SET UP AND OPERA TING INSTRUCTIONS NOTE: BA TTER Y P ACK (67029) SOLD SEP ARA TEL Y . Distributed exclusively by Harbor Freight T ools ® . 3491 Mission Oaks Blvd., Camarillo, CA 9301 1 Visit our website at: http://www .
Page 2 For technical questions, please call 1-800-444-3353. SKU 67031 SA VE THIS MANUAL Keep this manual for the safety warnings and precautions, assembly , operating, inspection, maintenance and cleaning procedures.
Page 3 For technical questions, please call 1-800-444-3353. SKU 67031 1. Use on dry , at, reproof surface only . The Charger gets hot during use. The Charger ’ s heat can build up to unsafe levels and create a re hazard if it does not receive adequate ventilation, due to an electrical fault, or if it is used in a hot environment.
Page 4 For technical questions, please call 1-800-444-3353. SKU 67031 Store idle chargers out of the reach 15. of children and do not allow persons unfamiliar with the Charger or these instructions to operate the Charger . Maintain chargers. Check for 16.
Page 5 For technical questions, please call 1-800-444-3353. SKU 67031 GROUNDING Improperly connecting the grounding wire can result in electric shock. Check with a qualied electrician if you are in doubt as to whether the outlet is properly grounded.
Page 6 For technical questions, please call 1-800-444-3353. SKU 67031 SPECIFICA TIONS Electrical Input 120 V~ / 60 Hz Electrical Output 22 VDC / 500 mA Charge T ime 3-5 hours Charging Capability 67029 - 18 V , 1.3 A, NiCd Battery Pack (sold separately) UNP ACKING When unpacking, make sure that the item is intact and undamaged.
Page 7 For technical questions, please call 1-800-444-3353. SKU 67031 USER-MAINTENANCE INSTRUCTIONS Procedures not specically explained in this manual must be performed only by a qualied technician. TO PREVENT SERIOUS INJUR Y FROM ACCIDENT AL OPERA TION: Unplug the Charger before performing any inspection, maintenance, or cleaning procedures.
Page 8 For technical questions, please call 1-800-444-3353. SKU 67031 LIMITED 90 DA Y W ARRANTY Harbor Freight T ools Co. makes ev- ery effort to assure that its products meet high quality and durabil.
An important point after buying a device Harbor Freight Tools DRILL MASTER 67031 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools DRILL MASTER 67031 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools DRILL MASTER 67031 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools DRILL MASTER 67031 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools DRILL MASTER 67031 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools DRILL MASTER 67031, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools DRILL MASTER 67031.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools DRILL MASTER 67031. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools DRILL MASTER 67031 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
