Instruction/ maintenance manual of the product CENTRAL PNEUMATIC 68128 Harbor Freight Tools
Go to page of 13
1” PINLESS AIR IMP ACT WRENCH 68128 SET UP AND OPERA TING INSTRUCTIONS Visit our website at: http://www .harborfreight.com Read this material before using this product. Failure to do so can result in serious injury . SA VE THIS MANUAL. Copyright © 2010 by Harbor Freight T ools ® .
SKU 68128 For technical questions, please call 1-800-444-3353. Page 2 SA VE THIS MANUAL Keep this manual for the safety warn- ings and precautions, assembly , operat- ing, inspection, maintenance and cleaning procedures.
SKU 68128 For technical questions, please call 1-800-444-3353. Page 3 tool. Distractions are able to result in the loss of control of the tool. Personal safety Stay alert. Watch what you are do- a. ing and use common sense when operating the tool. Do not use the tool while tired or under the inu - ence of drugs, alcohol, or medica- tion.
SKU 68128 For technical questions, please call 1-800-444-3353. Page 4 Store the tool when it is idle out of e. reach of children and other un- trained persons. A tool is dangerous in the hands of untrained users. Maintain the tool with care. f. A properly maintained tool is easier to control.
SKU 68128 For technical questions, please call 1-800-444-3353. Page 5 Symbol Denitions Symbol Property or statement W ARNING marking concerning Risk of Eye Injury . W ear ANSI-approved eye protection. W ARNING marking concerning Risk of Hearing Loss.
SKU 68128 For technical questions, please call 1-800-444-3353. Page 6 Wear suitable gloves to reduce the 3. vibration effects on the user . Use tools with the lowest vibration 4. when there is a choice. Include vibration-free periods each 5. day of work.
SKU 68128 For technical questions, please call 1-800-444-3353. Page 7 Air Supply TO PREVENT EXPLOSION: Use only clean, dry , regulated, compressed air to power this tool. Do not use oxygen, carbon dioxide, combustible gases, or any other bottled gas as a power source for this tool.
SKU 68128 For technical questions, please call 1-800-444-3353. Page 8 trapped line pressure, and detach air supply hose from the air supply . Note: Residual air pressure should not be present after the tool is disconnected from the air supply .
SKU 68128 For technical questions, please call 1-800-444-3353. Page 9 For Reverse, turn the Direction Knob 5. to the desired Reverse speed. NOTE: There are three torque settings for the Reverse direction. T o loosen, set the Regulator Knob to one of the Reverse settings.
SKU 68128 For technical questions, please call 1-800-444-3353. Page 10 USER-MAINTENANCE INSTRUCTIONS Procedures not specically explained in this manual must be performed only by a qualied technician.
SKU 68128 For technical questions, please call 1-800-444-3353. Page 1 1 T roubleshooting Problem Possible Causes Likely Solutions Decreased output. Not enough air pressure and/ 1. or air ow . Obstructed trigger . 2. Incorrect lubrication or not 3. enough lubrication.
SKU 68128 For technical questions, please call 1-800-444-3353. Page 12 Part Description Q’ty 1 Hex Screw 4 2 Gasket 8 3 Nut 4 4 Hammer Case 1 5 Side Handle 1 6 Bolt 4 7 W asher 4 8 Gasket 1 9 Oil Se.
SKU 68128 For technical questions, please call 1-800-444-3353. Page 13 ASSEMBL Y DIAGRAM LIMITED 1 YEAR W ARRANTY Harbor Freight T ools Co. makes every effort to assure that its products meet high qua.
An important point after buying a device Harbor Freight Tools CENTRAL PNEUMATIC 68128 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools CENTRAL PNEUMATIC 68128 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools CENTRAL PNEUMATIC 68128 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools CENTRAL PNEUMATIC 68128 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools CENTRAL PNEUMATIC 68128 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools CENTRAL PNEUMATIC 68128, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools CENTRAL PNEUMATIC 68128.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools CENTRAL PNEUMATIC 68128. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools CENTRAL PNEUMATIC 68128 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
