Instruction/ maintenance manual of the product 95671 Harbor Freight Tools
Go to page of 11
Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo , CA 93011 Visit our W eb site at: http://www .harborfreight.com Cop yr ight © 2007 by Harbor F reight T ools ® .
PR ODUCT SPECIFICA TIONS SA VE THIS MANU AL Y ou will need this manual f or the safety warnings and precautions, assembly , operating, inspection, maintenance and cleaning pr ocedures, par ts list and assembly diagram. Keep y our in voice with this man ual.
3. Keep bystanders, children, and visitors away while operating welding equipment. Distractions can cause you to lose control. Protect others in the work area from debris such as chips and sparks. Provide barriers or shields as needed. Children should not be allowed in the work area.
13. T ool service must be perf ormed only b y qualified repair personnel. Ser vice or maintenance perf or med by unqualified personnel could result in a risk of injur y . 14. When servicing a tool, use only identical replacement parts. Follow instructions in the “Inspection, Maintenance, And Cleaning” section of this manual.
structure, as in walls or ceilings , without an approv ed method for eliminating the hazard. Do not dispose of hot slag in containers holding combustible materials. K eep a fire e xtinguisher nearby and kno w how to use it. After welding or cutting, make a thorough e xamination f or evidence of fire .
7. Read and understand all instructions and saf ety precautions as outlined in the manufacturer’ s manual for the material y ou will weld or cut. 6. Alwa ys keep the W elding Hoses (7, 8) awa y from mo ving par ts on the tool. Examine the W elding Hoses f or cuts, bu r ns, or worn areas before each use .
chemical known to the State of California to cause birth defects (or other reproductive harm). (California Health & Safety Code 25249.5 et seq.) When unpacking, chec k to make sure all the par ts sho wn on the P ar ts List on page 11 are included.
5. IMPOR T ANT! The Pressure Adjusting Scre w on the Acetylene Regulator (not included) and the Pressure Adjusting Screw on the Oxygen Regulator (not included) should be opened slightly by turning counterclockwise to relie ve pressure on the regulator diaphragms bef ore opening the cylinder valv es.
8. Depending on use, attach a Tip (1, 12, 13, 14, 15) to the Mixer (2) on the T orch Handle (5). (See Figure B.) 9. Open the Oxygen V alve Stem (9) on the T orch Handle (5). Adjust the Oxygen Regulator to the desired working pressure. Then, close the Oxygen V alv e Stem on the T orch Handle.
INSPECTION, MAINTENANCE, AND CLEANING 1. W ARNING! Make sure the Welding T orch Mini-Kit is cool to the touc h and disconnected from its o xygen and acetylene cylinder s before performing any inspection, maintenance, or cleaning procedures. 2. BEFORE EA CH USE, inspect the general condition of the W elding T orch Mini-Kit.
NO TE: Some par ts are listed and shown f or illustration pur poses only , and are not av ailable individually as replacement parts. P ARTS LIST AND ASSEMBL Y DIA GRAM 12 13 14 15 SKU 95671 For technical questions, please call 1-800-444-3353 P AGE 11 Par t # Des cr ip ti o n Qt y.
An important point after buying a device Harbor Freight Tools 95671 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 95671 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 95671 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 95671 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 95671 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 95671, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 95671.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 95671. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 95671 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
