Instruction/ maintenance manual of the product 94724 Harbor Freight Tools
Go to page of 16
® 2 GALL 2 GALL 2 GALL 2 GALL 2 GALL ON 1.5 HP ON 1.5 HP ON 1.5 HP ON 1.5 HP ON 1.5 HP AIR COMPRESSOR Model 94724 OPERA TING INSTR UCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our W eb site at: http://www .harborfreight.com Cop yr ight © 2006 by Harbor F reight T ools ® .
SKU 94724 For technical questions, please call 1-800-444-3353. Page 2 PR ODUCT SPECIFICA TIONS SA VE THIS MANU AL Y ou will need this manual f or the safety warnings and precautions, assembl y , operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
SKU 94724 For technical questions, please call 1-800-444-3353. Page 3 3. Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control. Protect others in the work area from debris such as chips and sparks.
SKU 94724 For technical questions, please call 1-800-444-3353. Page 4 10. Dress properl y . Do not wear loose clothing or je welry . Contain long hair . Keep y our hair , clothing, and gloves a wa y from mo ving par ts. Loose clothes, je welr y , or long hair can be caught in moving par ts .
SKU 94724 For technical questions, please call 1-800-444-3353. Page 5 20. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that ma y affect the tool’ s operation. If damaged, have the tool serviced before using.
SKU 94724 For technical questions, please call 1-800-444-3353. Page 6 3. Y our tool must be plugged into an appropriate outlet, proper ly installed and grounded in accordance with all codes and ordinances. The plug and outlet should look like those in the following illustration.
SKU 94724 For technical questions, please call 1-800-444-3353. Page 7 1. Grounded tools require a three wire extension cord. Double Insulated tools can use either a two or three wire extension cord. 2 . As the distance from the supply outlet increases, you must use a heavier gauge extension cord.
SKU 94724 For technical questions, please call 1-800-444-3353. Page 8 SPECIFIC SAFETY RULES 1. Maintain a safe w orking en vironment. K eep the wor k area well lit. Make sure there is adequate surrounding workspace. Always keep the work area free of obstructions, grease, oil, trash, and other debris.
SKU 94724 For technical questions, please call 1-800-444-3353. Page 9 8. When filling the Air Compressor with oil, make sure to unscrew (do not pull) the Oil Plug (17) out. 9. Do not allow moisture to b uild up inside the T ank (55) . Drain w ater from the tank daily .
SKU 94724 For technical questions, please call 1-800-444-3353. Page 10 OPERA TING INSTRUCTIONS NO TE: For additional inf or mation regarding the par ts mentioned in the follo wing pages, refer to the Assembly Diagrams on pages 14 and15.
SKU 94724 For technical questions, please call 1-800-444-3353. Page 11 AIR OUTLET VA L V E (48) CONNECT AIR HOSE HERE. CLOSED POSITION OPEN POSITION FIGURE E T OP VIEW OIL FILL CAP (11) OIL SIGHT GA UGE (19) KEEP OIL LEVEL EVEN WITH RED DO T FIGURE D the horizontal line as shown on the Oil Sight Gauge (19).
SKU 94724 For technical questions, please call 1-800-444-3353. Page 12 3 . Make sure the T ank Drain V alve (67) is closed. (See Figure F .) 4 . Make sure the “On/Off ” Pressure Switch (C) is DO WN in its OFF position. Then, plug the P o wer Cord (D) into the nearest 120 v olt, grounded, electrical outlet.
SKU 94724 For technical questions, please call 1-800-444-3353. Page 13 INSPECTION AND MAINTENANCE 1. W ARNING! Alwa ys unplug the Air Compressor from its electrical outlet before performing any inspection, maintenance, or cleaning. 2. Before eac h use: Inspect the general condition of the Air Compressor .
SKU 94724 For technical questions, please call 1-800-444-3353. Page 14 P AR TS LIST Air Outlet V alve.
SKU 94724 For technical questions, please call 1-800-444-3353. Page 15 ASSEMBL Y DIA GRAM Note: Some par ts are listed and shown f or illustration purposes only and are not available individually as replacement par ts.
SKU 94724 For technical questions, please call 1-800-444-3353. Page 16 3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353 Harbor F reight T ools Co.
An important point after buying a device Harbor Freight Tools 94724 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 94724 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 94724 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 94724 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 94724 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 94724, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 94724.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 94724. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 94724 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
