Instruction/ maintenance manual of the product 92626 Harbor Freight Tools
Go to page of 10
2000 LB. CAP ACITY A-FRAME TRAILER JACK 92626 SET UP AND OPERA TING INSTRUCTIONS Visit our website at: http://www .harborfreight.com Read this material before using this product. Failure to do so can result in serious injury . SA VE THIS MANUAL. Copyright © 2010 by Harbor Freight T ools ® .
Page 2 For technical questions, please call 1-800-444-3353. SKU 92626 SA VE THIS MANUAL Keep this manual for the safety warnings and precautions, assembly , operating, inspection, maintenance and cleaning procedures.
Page 3 For technical questions, please call 1-800-444-3353. SKU 92626 This enables better control of the tool in unexpected situations. d. Dress properly . Do not wear loose clothing or jewelry . Keep your hair , clothing and gloves away from moving parts.
Page 4 For technical questions, please call 1-800-444-3353. SKU 92626 14. The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur .
Page 5 For technical questions, please call 1-800-444-3353. SKU 92626 not specically designed for it. An example of an A-frame hitch is shown in Figure 1. 4. Insert the top of the T railer Jack up through the hole in the center of the A-frame hitch until the mounting plate rests against the hitch.
Page 6 For technical questions, please call 1-800-444-3353. SKU 92626 7. Now that the T railer Jack is fully assembled, test it by raising the hitch enough to remove the supports inserted in Step 2 on page 4.
Page 7 For technical questions, please call 1-800-444-3353. SKU 92626 SER VICING Procedures not specically explained in this manual must be performed only by a qualied technician. TO PREVENT SERIOUS INJUR Y FROM TOOL F AILURE: Do not use damaged equipment.
Page 8 For technical questions, please call 1-800-444-3353. SKU 92626 PLEASE READ THE FOLLOWING CAREFULL Y THE MANUF ACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE P ARTS LIST AND ASSEMBL Y DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONL Y .
Page 9 For technical questions, please call 1-800-444-3353. SKU 92626 ASSEMBL Y DIAGRAM Assembly Diagram.
Page 10 For technical questions, please call 1-800-444-3353. SKU 92626 LIMITED 90 DA Y W ARRANTY Harbor Freight T ools Co. makes every ef fort to assure that its products meet high quality and durabil.
An important point after buying a device Harbor Freight Tools 92626 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 92626 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 92626 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 92626 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 92626 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 92626, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 92626.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 92626. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 92626 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
