Instruction/ maintenance manual of the product 92427 Harbor Freight Tools
Go to page of 9
1” AIR IMP A CT WRENCH ASSEMBL Y and OPERA TING INSTR UCTIONS 3491 Mission Oaks Blvd., Camarillo , CA 93011 Visit our W eb site at http://www .harborfreight.com For technical questions and replacement parts, please call 1-800-444-3353 Model 92427 ® Cop yr ight © 2004 by Harbor F reight T ools ® .
Page 2 SKU 92427 For technical questions, please call 1-800-444-3353 Save This Manual Y ou will need the manual f or the safety w ar nings and precautions, assemb ly instr uctions, operating and maintenance procedures , par ts list and diagram. Keep y our inv oice with this manual.
Page 3 SKU 92427 For technical questions, please call 1-800-444-3353 7. Use ey e and ear pr otection . Alw a ys wear ANSI appro ved impact saf ety goggles. W ear a full face shield if y ou are producing metal filings or wood chips . W ear an ANSI approv ed dust mask or respirator when working around metal, wood, and chemical dusts and mists.
Page 4 SKU 92427 For technical questions, please call 1-800-444-3353 21. This Impact Wrench should only be used with impact soc kets and e xtensions . Using any other accessories can cause the accessories to break, causing permanent damage to the unit and se vere injur y to the operator .
Page 5 SKU 92427 For technical questions, please call 1-800-444-3353 Assembly 1. Place the Handle (48) into the handle slot and secure it with two Screws (49). See FIGURE 1 . FIGURE 1 Operation W arning!! This Impact Wrench supplies powerful torque and is designed to be operated with two hands .
Page 6 SKU 92427 For technical questions, please call 1-800-444-3353 Operation (continued) Ref er to FIGURES 2 and 4 , and the Assembly Dra wing on page 9. Note: T ur n off your air compressor and disconnect the air hose when y ou are changing sock ets.
Page 7 SKU 92427 For technical questions, please call 1-800-444-3353 Operation (continued) Loosening Note: Set the F orward/Re v erse V alve (34) so that the an vil tur ns countercloc kwise (re verse). 9. Place the socket (not included) over the nut you wish to loosen.
Page 8 SKU 92427 For technical questions, please call 1-800-444-3353 Part No. Description Qty . Part No. Description Qty . 1 Bumper 1 28 V alve Spring 1 2 Spacer 1 29 0-ring 1 3 0-ring 1 30 Screw 1 4 .
Page 9 SKU 92427 For technical questions, please call 1-800-444-3353 Assembly Drawing Note: The Wrench (54) is not shown..
An important point after buying a device Harbor Freight Tools 92427 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 92427 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 92427 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 92427 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 92427 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 92427, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 92427.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 92427. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 92427 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
