Instruction/ maintenance manual of the product 91772 Harbor Freight Tools
Go to page of 15
® ASSEMBL Y AND OPERA TING INSTR UCTIONS TO PREVENT SERIOUS INJUR Y , READ AND UNDERST AND ALL W ARNINGS AND INSTRUCTIONS BEFORE USE. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our W eb site at: http://www .harborfreight.com Cop yright 2004 by Harbor F rei ght T ools ® .
SKU 91772 For technical questions, please call 1-800-444-3353. Page 2 PRODUCT SPECIFICA TIONS SA VE THIS MANU AL Y ou will need this man ual for the saf ety warnings and precautions, assembly , operating, inspection, maintenance and cleaning procedures, parts list and as- semb ly diagram.
SKU 91772 For technical questions, please call 1-800-444-3353. Page 3 ELECTRICAL SAFETY 4. Grounded tools must be plugged into an outlet properly installed and grounded in accordance with all codes and ordinances. Never remove the gr ounding prong or modify the plug in any wa y .
SKU 91772 For technical questions, please call 1-800-444-3353. Page 4 12. A void accidental starting. Be sure the P ower Switc h is off before plug ging in. Carrying power tools with your finger on the Power Switch, or plugging in power tools with the Power Switch on, invites accidents.
SKU 91772 For technical questions, please call 1-800-444-3353. Page 5 23. Use only accessories that are recommended by the manufacturer for your model. Accessories that ma y be suitable for one tool ma y become hazardous when used on another tool. SE R VICE 24.
SKU 91772 For technical questions, please call 1-800-444-3353. Page 6 11. W ARNING: The brass components of this product contain lead, a chemical kno wn to the State of Calif or nia to cause bir th defects (or other reproductiv e harm). (California Health & Safety code § 25249.
SKU 91772 For technical questions, please call 1-800-444-3353. Page 7 GROUNDING W ARNING! Improperly connecting the grounding wire can result in the risk of electric shock. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded.
SKU 91772 For technical questions, please call 1-800-444-3353. Page 8 FIGURE B DOUBLE INSULA TED T OOLS: T OOLS WITH TWO PRONG PLUGS 4. T ools mark ed “Double Insulated” do not require grounding.
SKU 91772 For technical questions, please call 1-800-444-3353. Page 9 6. If you are using an extension cord outdoors, make sure it is marked with the suffix “ W -A” (“W” in Canada) to indicate it is acceptable f or outdoor use. 7. Make sure your extension cord is properly wired and in good electrical condition.
SKU 91772 For technical questions, please call 1-800-444-3353. Page 10 UNP ACKING When unpacking, check to make sure all the parts shown on the Parts List on page 14 are included. If an y par ts are missing or broken, please call Harbor F reight T ools at the number shown on the cover of this manual as soon as possible.
SKU 91772 For technical questions, please call 1-800-444-3353. Page 11 Refer to the Assembly Drawing on page 15 and FIGURE 1 on page 10. Chec king t he P aint Viscosity When using a HVLP (low pressure and high volume) spra y gun the paint must be thinned to the proper viscosity .
SKU 91772 For technical questions, please call 1-800-444-3353. Page 12 5. Secure the Spra y Gun in the Gun T r ay (41). If the Gun T ra y (41) is not attached to the Motor Unit, attach it as shown in FIGURE 3 on page 11.
SKU 91772 For technical questions, please call 1-800-444-3353. Page 13 INSPECTION, MAINTENANCE, AND CLEANING 1. W ARNING! Make sure the P ow er Switch (31) of the Motor Unit is in its “OFF” position and that the tool is unplugged from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.
SKU 91772 For technical questions, please call 1-800-444-3353. Page 14 THE MANUF ACTURER AND/OR DISTRIBUT OR HAS PRO VIDED THE P AR TS LIST AND ASSEMBL Y DIAGRAM IN THIS MANU AL AS A REFERENCE T OOL ONL Y .
SKU 91772 For technical questions, please call 1-800-444-3353. Page 15 NO TE: Some par ts are listed and sho wn for illustration pur poses only , and are not available individually as replacement parts.
An important point after buying a device Harbor Freight Tools 91772 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 91772 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 91772 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 91772 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 91772 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 91772, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 91772.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 91772. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 91772 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
