Instruction/ maintenance manual of the product 68169 Harbor Freight Tools
Go to page of 16
1/2” HAMMER DRILL Model 68169 SET UP AND OPERA TING INSTRUCTIONS Visit our website at: http://www .harborfreight.com Read this material before using this product. Failure to do so can result in serious injury . SA VE THIS MANUAL. Copyright © 2010 by Harbor Freight T ools ® .
Page 2 For technical questions, please call 1-800-444-3353. SKU 68169 SA VE THIS MANUAL Keep this manual for the safety warnings and precautions, assembly , operating, inspection, maintenance and cleaning procedures.
Page 3 For technical questions, please call 1-800-444-3353. SKU 68169 ranges and refrigerators. There is an increased risk of electric shock if your body is grounded. c. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
Page 4 For technical questions, please call 1-800-444-3353. SKU 68169 with the switch is dangerous and must be repaired. c. Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools.
Page 5 For technical questions, please call 1-800-444-3353. SKU 68169 pacemaker interference or pacemaker failure. In addition, people with pacemakers should: • Avoid operating alone. • Do not use with power switch locked on. • Properly maintain and inspect to avoid electrical shock.
Page 6 For technical questions, please call 1-800-444-3353. SKU 68169 7. T o reduce vibration, maintain the tool as explained in this manual. If any abnormal vibration occurs, stop use immediately .
Page 7 For technical questions, please call 1-800-444-3353. SKU 68169 6. If you are using an extension cord outdoors, make sure it is marked with the sufx “W-A” (“W” in Canada) to indicate it is acceptable for outdoor use. 7. Make sure the extension cord is properly wired and in good electrical condition.
Page 8 For technical questions, please call 1-800-444-3353. SKU 68169 SPECIFICA TIONS Electrical Input 120 V~ / 60 Hz / 7.5 A (Rated) Motor Speed 0-2800 RPM Drilling Capacity 1/2” in Steel 5/8” in.
Page 9 For technical questions, please call 1-800-444-3353. SKU 68169 OPERA TING INSTRUCTIONS Read the ENTIRE IMPORT ANT SAFETY INFORMA TION section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
Page 10 For technical questions, please call 1-800-444-3353. SKU 68169 6. T o adjust the drilling speed, rotate the speed control knob located in the center of the T rigger . T urn clockwise to increase speed and counterclockwise to decrease speed. See Figure 2.
Page 1 1 For technical questions, please call 1-800-444-3353. SKU 68169 Recommended Drill Bits Sets The chart below lists applicable Drill Bit sets that are available from Harbor Freight T ools.
Page 12 For technical questions, please call 1-800-444-3353. SKU 68169 MAINTENANCE AND SER VICING Procedures not specically explained in this manual must be performed only by a qualied technician.
Page 13 For technical questions, please call 1-800-444-3353. SKU 68169 T roubleshooting Problem Possible Causes Likely Solutions T ool will not start. 1. Cord not connected. 2. No power at outlet. 3. Internal damage or wear . (Carbon brushes or switch.
Page 14 For technical questions, please call 1-800-444-3353. SKU 68169 Part Description Qty . 1 Screw (M6x25) 1 2 Chuck Key 1 3 Chuck 1 4 Spindle 1 5 Spindle Key (3x10mm) 1 6 Circlip (M23) 1 7 Bearing.
Page 15 For technical questions, please call 1-800-444-3353. SKU 68169 ASSEMBL Y DIAGRAM 46 45 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 21 42 43 44 20 19 18 22 26 23 25 24 27 28 29 30 31 32 36 35 34 .
Page 16 For technical questions, please call 1-800-444-3353. SKU 68169 LIMITED 90 DA Y W ARRANTY Harbor Freight T ools Co. makes every ef fort to assure that its products meet high quality and durabil.
An important point after buying a device Harbor Freight Tools 68169 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 68169 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 68169 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 68169 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 68169 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 68169, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 68169.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 68169. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 68169 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
