Instruction/ maintenance manual of the product 450 American Power Conversion
Go to page of 14
Notice: In case of a problem with this product, do not return to the place of purchase. Go to the support page at www.apcc.com for Technical Support or call 1-800-800-4272 for prompt customer service.
990-5022A, Revision 2 6/99 PowerStack 450 Quick Reference Guide English About Your New PowerStack UPS This Uninterruptible Power Supply (UPS) is designed to prevent blackouts, brownouts, sags and surges from reaching your computer and other valuable electronic equipment.
990-5022A, Revision 2 6/99 Table of Contents Safety .......................................................................................................................................................................................................
.
990-5022A, Revision 2 6/99 1 Safety This section contains important instructions that should be followed during installation and maintenance of the PowerStack 450 and batteries. It is intended for customers who setup, install, relocate, or maintain APC equipment.
990-5022A, Revision 2 6/99 2 • Do not use a ramp inclined at more than 10 ° . • This equipment is intended for installation in a temperature-controlled (0 ° - 40 ° C) indoor area, free of conductive contaminants.
990-5022A, Revision 2 6/99 3 Initial Inspection Inspect the APC PowerStack 450 UPS upon receipt. Notify the carrier and dealer if there is damage. The packaging is recyclable; save it for reuse or dispose of it properly.
990-5022A, Revision 2 6/99 4.
990-5022A, Revision 2 6/99 5 Setup Note: The UPS will not power up initially unless the AC voltage is in the normal operating range. Rear View Plug the power cord into the power supply. Connect equipment to the output receptacles. • Do not power laser printers through the UPS.
990-5022A, Revision 2 6/99 6 LEDs and Audible Alarms The on-line LED illuminates when the UPS is supplying utility power to the loads. On Battery During on-battery operation, the on-battery LED illuminates and the UPS sounds an audible alarm consisting of four beeps every 30 seconds.
990-5022A, Revision 2 6/99 7 Operating Modes Shutdown Mode In shutdown mode the UPS stops supplying power to the load, waiting for the return of utility power. If there is no utility power present, external devices (e.g., servers) connected to the computer interface can command the UPS to shut down.
990-5022A, Revision 2 6/99 8 Replacing the Battery Pack This UPS has an easy to replace hot-swappable battery pack. Note: Please read the cautions in the APC Safety Guide . Replacement Batteries See your dealer or call the number in this manual for information on replacement battery pack kits, order RBC18 .
990-5022A, Revision 2 6/99 9 Specifications Acceptable input voltage 0 - 150 VAC Input voltage (on-line operation) Nominal Range Maximum Range User adjustable through PowerChute® plus . 74-119 VAC 69-126 VAC Output voltage) Nominal Range Maximum Range User adjustable through PowerChute® plus .
990-5022A, Revision 2 6/99 10 9. Include a letter with your name, RMA#, address, copy of the sales receipt, description of the trouble, your daytime phone number, and a check (if necessary). 10. Mark the RMA# on the outside of the package. 11. Return the UPS by insured, prepaid carrier to the address given to you by Customer Service.
An important point after buying a device American Power Conversion 450 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought American Power Conversion 450 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data American Power Conversion 450 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, American Power Conversion 450 you will learn all the available features of the product, as well as information on its operation. The information that you get American Power Conversion 450 will certainly help you make a decision on the purchase.
If you already are a holder of American Power Conversion 450, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime American Power Conversion 450.
However, one of the most important roles played by the user manual is to help in solving problems with American Power Conversion 450. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device American Power Conversion 450 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
