Instruction/ maintenance manual of the product 44849 Harbor Freight Tools
Go to page of 14
CORDLESS DRILL KIT -18V Model 44849 ASSEMBL Y INFORMA TION Diagrams within this manual may not be drawn proportionally . Due to continuing improvements, actual product may differ slightly from the product described herein. Distributed exclusively by Harbor Freight T ools ® .
Page 2 SKU 44849 For technical questions, please call 1-800-444-3353. SPECIFICA TIONS Battery 18V , Ni-Cd Rechargeable Speed 0-900 RPM, Reversible T orque Settings 6 Chuck 3/8” Keyless Drill Weight 4.3 lb. Length 9” Included Bits 6 Pc. Screw . Set; 6 Pc.
Page 3 SKU 44849 For technical questions, please call 1-800-444-3353. CHECK FOR DAMAGED P ARTS. 10. Before using this product, carefully check that this tool will operate properly and perform its intended function. Check for damaged parts and any other conditions that may affect the operation of this tool.
Page 4 SKU 44849 For technical questions, please call 1-800-444-3353. the work area, moving the tool from one location to another , handing the tool to another person, etcetera. READ ALL INSTRUCTIONS AND W ARNINGS ON THE BA TTER Y BEFORE CHARG- 8. ING THE BA TTER Y .
Page 5 SKU 44849 For technical questions, please call 1-800-444-3353. UNP ACKING When unpacking, check to make sure all parts shown on the Parts List (page 10) are included. If any parts are missing or broken, please call Harbor Freight T ools at the number shown on the cover of this manual as soon as possible.
Page 6 SKU 44849 For technical questions, please call 1-800-444-3353. The red light on the Charger turns on when you insert the Battery into the Battery 4. Charger , indicating that the electric current is charging the Battery . If the red light does not come on, recheck the T ransformer cord connection or try a different electrical outlet.
Page 7 SKU 44849 For technical questions, please call 1-800-444-3353. T o Insert And Remove Drill Bits And Drivers: FIGURE D REVERSING SWITCH TRIGGER BA TTERY 1. Set the Reversing Switch (16) to the “LOCKED” (Center) position. (See Figure D.) Hold the Chuck rmly while turning the forward section of the Chuck 2.
Page 8 SKU 44849 For technical questions, please call 1-800-444-3353. REV 03a; 08a OPERA TING INSTRUCTIONS Note: All parts below refer to the parts listed on pages 1 1 and 12 of this manual. T o Operate The Reversing Switch: The three-position Reversing Switch is located on top of the T rigger .
Page 9 SKU 44849 For technical questions, please call 1-800-444-3353. Rev 03a Drill Bit Selection: Always use sharp drill bits. Sharp bits are less likely to bind when drilling. 1. Use the proper bit for the job. There are many types of bits designed for specic purpos - 2.
Page 10 SKU 44849 For technical questions, please call 1-800-444-3353. Rev 03a CLEANING AND MAINTENANCE Caution: Always disconnect this tool from its electrical power supply before performing any cleaning, servicing, or maintenance. Keep the Drill exterior free of oil or grease.
Page 1 1 SKU 44849 For technical questions, please call 1-800-444-3353. PLEASE READ THE FOLLOWING CAREFULL Y THE MANUF ACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE P ARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONL Y .
Page 12 SKU 44849 For technical questions, please call 1-800-444-3353. P ARTS ASSEMBL Y #19 Battery Charger (not shown) Note: Some parts are listed and shown for illustration purposes only , and are not available individually as replacement parts.
Page 13 SKU 44849 For technical questions, please call 1-800-444-3353. ELECTRICAL SCHEMA TIC Rev 03a.
Page 14 SKU 44849 For technical questions, please call 1-800-444-3353. LIMITED 90 DA Y W ARRANTY Harbor Freight T ools Co. makes every effort to assure that its products meet high quality and durabili.
An important point after buying a device Harbor Freight Tools 44849 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 44849 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 44849 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 44849 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 44849 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 44849, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 44849.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 44849. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 44849 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
