Instruction/ maintenance manual of the product 44505 Harbor Freight Tools
Go to page of 20
8” Drill Press Model 44505 set uP anD OPera ting instructiOns Visit our website at: http://www .harborfreight.com read this material before using this product. Failure to do so can result in serious injury . sa Ve this Manual. Copyright © 2010 by Harbor Freight T ools ® .
Page 2 For technical questions, please call 1-800-444-3353. SKU 44505 cOntents iMPOrt ant saFetY inFOrMa tiOn ................................. 3 general t OOl saFetY W arnings . 3 grOunDing instructiOns .......... 5 1 10-120 V~ grOunDeD tOOls: tOOls With three PrOng Plugs 5 Drill Press saFetY W arnings .
Page 3 For technical questions, please call 1-800-444-3353. SKU 44505 sa Ve this Manual Keep this manual for the safety warnings and precautions, assembly , operating, inspection, maintenance and cleaning procedures.
Page 4 For technical questions, please call 1-800-444-3353. SKU 44505 USE RIGHT TOOL. Don’t force tool or 8. attachment to do a job for which it was not designed. recOMMenDeD MiniMuM Wire gauge FOr eXtensiOn cOrDs (120 VOl t) naMePla te aMPeres (at full load) eXtensiOn cOrD length 25’ 50’ 100’ 150’ 0 – 6 18 16 16 14 6.
Page 5 For technical questions, please call 1-800-444-3353. SKU 44505 grOunDing instructiOns tO PreVent electric shOck anD Dea th FrOM incOrrect grOunDing Wire cOnnectiOn reaD anD FOllOW these instructiOns: 1 10-120 V~ grounded t ools: t ools with three Prong Plugs In the event of a malfunction or 1.
Page 6 For technical questions, please call 1-800-444-3353. SKU 44505 DO nOt OPera te With anY 5. guarD DisableD, DaMageD, Or reMOVeD. The use of accessories or attachments 6. not recommended by the manufacturer may result in a risk of injury to persons.
Page 7 For technical questions, please call 1-800-444-3353. SKU 44505 diabetes, or Raynaud’s Disease should not use this tool. If you feel any medical or physical symptoms related to vibration (such as tingling, numbness, and white or blue ngers), seek medical advice as soon as possible.
Page 8 For technical questions, please call 1-800-444-3353. SKU 44505 sPeciFica tiOns Electrical Input 120 V~, 60 Hz, 1/3 HP (3.6 A) Motor Speed 1750 RPM (No Load) Spindle Speeds 620, 1 100, 1720, 234.
Page 9 For technical questions, please call 1-800-444-3353. SKU 44505 Thread in two Set Screws (1 1), into the 6. side of the Head (1) and tighten. Attach Knob (A2) to the (top) pulley 7. Guard (A5) using Pan Head Screw (A3). Adjust 8. belt (a4) tension: Open the pulley Guard (A5) to expose a.
Page 10 For technical questions, please call 1-800-444-3353. SKU 44505 t ool set up tO PreVent seriOus injur Y FrOM acciDent al OPera tiOn: t urn the Power switch of the tool to its “OFF” position and unplug the tool from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.
Page 1 1 For technical questions, please call 1-800-444-3353. SKU 44505 Open the Chuck (B8) and insert the drill 3. bit in the center . Hand tighten the Chuck securely . Secure the workpiece (and backup 4. material) to the T able using a vise and/or clamp.
Page 12 For technical questions, please call 1-800-444-3353. SKU 44505 Maintenance anD ser Vicing Procedures not specically explained in this manual must be performed only by a qualied technician.
Page 13 For technical questions, please call 1-800-444-3353. SKU 44505 adjusting the Feed Wheel return t ension spring cautiOn! Wear an ansi-approved full face shield during this procedure. Move the Chuck to its uppermost 1. position. Loosen Hex Nuts (31) and move both to 2.
Page 14 For technical questions, please call 1-800-444-3353. SKU 44505 t roubleshooting Problem Possible causes likely solutions T ool will not start. Cord not connected. 1. No power at outlet. 2. Internal damage or wear . 3. Check that cord is plugged in.
Page 15 For technical questions, please call 1-800-444-3353. SKU 44505 Part Description 1 Head w/ Roll Pin and Trim 2 Nut, Lock, M8x1.25-8 3 W asher , 5/16 x 1 1/16 x 1/16 4 Screw , Hex, M8x1.25-25 5 Pulley , Motor 6 Screw , Hex Soc. Set, M6x1.0-10 7 Motor 8 Stop, Motor 9 Spring, Motor Stop 10 Knob, Motor Adjusting 11 Screw , Hex Soc.
Page 16 For technical questions, please call 1-800-444-3353. SKU 44505 head assembly Diagram 35 36 37 38 39 40.
Page 17 For technical questions, please call 1-800-444-3353. SKU 44505 When ordering a part from this drawing, add an “A” prex to the part number . Parts list and Diagram a - Pulley and spindle Part Description A1 Bushing, Rubber A2 Knob A3 Screw , Pan Hd.
Page 18 For technical questions, please call 1-800-444-3353. SKU 44505 When ordering a part from this drawing, add a “B” prex to the part number . Parts list and Diagram b - chuck and spindle shaft Part Description B1 Gasket, Quill B2 Bearing, Ball, 12 mm B3 Tube, Quill B4 Screw , Pan, M5x0.
Page 19 For technical questions, please call 1-800-444-3353. SKU 44505 When ordering a part from this drawing, add a “C” prex to the part number . Parts list and Diagram c - base and t able Part Description C1 Support, T able with Scale C2 Support, Lock Handle C3 T ube, Support C4 Base C5 Screw , Hex Hd.
Page 20 For technical questions, please call 1-800-444-3353. SKU 44505 liMiteD 90 Da Y W arrantY Harbor Freight T ools Co. makes every effort to assure that its products meet high quality and durabili.
An important point after buying a device Harbor Freight Tools 44505 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 44505 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 44505 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 44505 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 44505 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 44505, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 44505.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 44505. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 44505 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
