Instruction/ maintenance manual of the product 40132 Harbor Freight Tools
Go to page of 5
Compressor Duty Motor - 1 HP Model 40132 Assembly and Operating Instructions Copyright 2002 by Harbor Freight T ools ® . All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight T ools.
SPECIFICA TIONS SA VE THIS MANUAL Y ou will need the manual for the safety warnings and cautions, assembly instructions, operat- ing procedures, maintenance procedures, trouble shooting, parts list, and diagram . Keep your invoice with this manual. Write the invoice number on the inside of the front cover .
7. DRESS PROPERL Y . Do not wear loose clothing or jewelry as they can be caught in moving parts. Protective, electrically non-conductive clothes and non-skid footwear are recommended when working. Wear restrictive hair covering to contain long hair .
19. REPLACEMENT P ARTS AND ACCESSORIES. When servicing, use only identical re- placement parts. Use of any other parts will void the warranty . Only use accessories in- tended for use with this tool. Approved accessories are available from Harbor Freight T ools.
WIRING Y our motor is designed for either 1 10-120V or 220-240V operation. Additionally , you can wire your motor for either clockwise or counterclockwise rotation. W ARNING: ELECTRICAL SHOCK HAZARD. If you have any doubts concerning the wiring of the motor , consult a qualified electrician.
An important point after buying a device Harbor Freight Tools 40132 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 40132 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 40132 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 40132 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 40132 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 40132, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 40132.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 40132. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 40132 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
