Instruction/ maintenance manual of the product 02471 Harbor Freight Tools
Go to page of 9
P AINT/TEXTURE AIR GUN ASSEMBL Y and OPERA TING INSTR UCTIONS 3491 Mission Oaks Blvd., Camarillo , CA 93011 Visit our W eb site at http://www .harborfreight.com For technical questions and replacement parts, please call 1-800-444-3353 Model 02471 Cop yr ight © 2002 b y Harbor F reight T ools ® .
Page 2 SKU 02471 Save This Manual Y ou will need the manual for the saf ety warnings and precautions, assemb ly instr uctions, operating and maintenance procedures , par ts list and diagram. Keep y our inv oice with this manual. Write the in voice number on the inside of the front co ver .
Page 3 SKU 02471 9. Do not overreach . Keep proper footing and balance at all times. Do not reach over or across running machines. 10. Maintain tools with care . Keep tools clean for better and safer performance. Follow instructions for lubricating and changing accessories.
Page 4 SKU 02471 23. Read labels on cleaning solvents and paint coatings . Chlorinated solvents such as 111-T richloroethane and Methylene Chloride (also known as meth yl-chloride) can chemically react with aluminum and may explode. Many paint sprayers contain aluminum.
Page 5 SKU 02471 Assembly Refer to Assemb ly Dra wing on page 9. 1. T o attach the Cup (#17) , use the Clamp (#18) to connect it to the Bod y (#3) . Operation W arning! Ne ver allo w the Spra y Gun and Cup (#17) to lay on it’ s side when the Cup (#17) is full of material.
Page 6 SKU 02471 Adjustments 1. Y ou can regulate the fluid flow with the Regulator Guide (#8) . Slowly turn it to fine tune the air pressure to meet your needs . Y ou ma y also adjust the pressure with the air compressor . Make sure you do not exceed the recommended 70 PSI.
Page 7 SKU 02471 Maintenance Cleaning (Gun should be attached to compressor to complete the cleaning process.) W arning!! Do not use paint strippers on this unit as they will damage the aluminum. Ne ver allow the unit to la y on it’ s side while paint is in the Cup (#17) .
Page 8 SKU 02471 NO TE : Some par ts are listed and shown f or illustration pur poses only and are not av ailable individually as replacement par ts. PLEASE READ THE FOLLO WING CAREFULL Y THE MANUF ACTURER AND/OR DISTRIBU TOR HAS PR O VIDED THE P AR TS DIA GRAM IN THIS MANU AL AS A REFERENCE T OOL ONL Y .
Page 9 SKU 02471 Assembly Drawing 11a 8a 8 REV 06/05.
An important point after buying a device Harbor Freight Tools 02471 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 02471 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 02471 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 02471 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 02471 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 02471, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 02471.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 02471. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 02471 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
