Instruction/ maintenance manual of the product B19BL Hansol Multitech
Go to page of 8
19 I nch (V iewable size 18 ) High Resolution Color Monitor (B19BL) Printed on the recyclable paper Printed in Korea Part No. 942149060001 - 02 User s Manual.
Introduction Package 4 Features 5 Safety Information 6 Power Management System 7 Installation Connection to your computer 7 Pin assignment table D-Sub mini 15 pin connector 8 Controls Function of cont.
Introduction User’s Manual 4 Caution Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Warning If this equipment has more than one interface connector, do not leave cables connected to unused interfaces.
Introduction User’s Manual 6 Safety information Provided with this monitor is a detachable power supply cord with IEC320 style terminations. It may be suitable for connection to any UL listed personal computer with similar configuration.
User’s Manual 8 Installation Pin assignment table D-Sub Mini 15pin connector Function of controls OSD Controls “ON SCREEN MENU” controls include the following extended controls such as Size, Position, Geometry Distortion, Color temp, Degauss, Moire on & off, Language, OSD-Position, Recall, Cont & Brt, etc.
User ’ s Manual 10 Controls Contrast & Brightness Menu EXIT : Exit the Brightness or Contrast menu. Cursor : Increase or decrease the Brightness Cursor : Increase or decrease the Contrast. Position Menu : Move the image vertically up or down. : Move the image horizontally left or right.
User ’ s Manual 13 ENGLISH User ’ s Manual 12 T roubleshooting Troubleshooting guide If your monitor is not performing properly, please use the following troubleshooting chart for quick solutions to common problems. Controls Problem No Picture Picture is unstable The display image is not centered, too small or large.
Appendix User ’ s Manual 15 User ’ s Manual 14 Specifications Preset Timings This Monitor B19AL has preset modes for the 14 most popular industry standards for Plug and Play capability.
An important point after buying a device Hansol Multitech B19BL (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hansol Multitech B19BL yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hansol Multitech B19BL - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hansol Multitech B19BL you will learn all the available features of the product, as well as information on its operation. The information that you get Hansol Multitech B19BL will certainly help you make a decision on the purchase.
If you already are a holder of Hansol Multitech B19BL, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hansol Multitech B19BL.
However, one of the most important roles played by the user manual is to help in solving problems with Hansol Multitech B19BL. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hansol Multitech B19BL along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
